HP Pavilion Dv2900 Entertainment Notebook Pc Series Manual
Have a look at the manual HP Pavilion Dv2900 Entertainment Notebook Pc Series Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1114 HP manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Optical drive NOTE:All optical drive spare part kits include an optical drive bezel. DescriptionSpare part number For use in computer models with Intel processors: DVD±RW and CD-RW Super Multi Double-Layer Combo Drive with LightScribe452052-001 DVD±RW and CD-RW Super Multi Double-Layer Combo Drive452051-001 DVD/CD-RW Combo Drive452050-001 High Definition DVD-ROM and DVD±RW Drive463933-001 For use in computer models with AMD processors: DVD±RW and CD-RW Super Multi Double-Layer Combo Drive with LightScribe455830-001 DVD±RW and CD-RW Super Multi Double-Layer Combo Drive455829-001 DVD/CD-RW Combo Drive455828-001 Before removing the optical drive, follow these steps: 1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2.Disconnect all external devices connected to the computer. 3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4.Remove the battery (see Battery on page 56). Remove the optical drive: 1.Position the computer with right side toward you. 2.Remove the Phillips PM2.5×7.0 screw (1) that secures the optical drive to the computer. 3.Insert a thin tool, such as a paper clip (2), into the release access. (The optical drive media tray is partially ejected from the optical drive.) Component replacement procedures 73
4.Use the media tray frame to remove the optical drive (3). 5.If it is necessary to replace the optical drive bracket, position the optical drive with the optical drive bracket toward you. 6.Remove the two Phillips PM2.0×3.0 screws (1) that secure the optical drive bracket to the optical drive. 7.Remove the optical drive bracket (2). Reverse the above procedure to reassemble and install the optical drive. Keyboard Countries or regionsSpare part numberCountries or regionsSpare part number Keyboards for use in basic computer models: Belgium 448615-021Portugal448615-131 Brazil448615-201Russia448615-251 Canadian French 448615-121 Saudi Arabia 448615-171 74 Chapter 4 Removal and replacement procedures
Countries or regionsSpare part numberCountries or regionsSpare part number Denmark, Finland, Norway, and Sweden448615-DH1South Korea448615-AD1 France448615-051Spain448615-071 Germany448615-041Switzerland448615-111 Greece448615-DJ1Taiwan448615-AB1 Israel448615-BB1Thailand448615-281 Italy448615-061Turkey448615-141 Japan448615-291The United Kingdom448615-031 Latin America448615-161The United States448615-001 The Netherlands and Europe448615-B31 Keyboards for use only in metal-colored Special Edition computer models with Intel processors: Brazil 452236-201Spain452236-071 Denmark, Finland, Norway, and Sweden452236-DH1Switzerland452236-111 France452236-051Taiwan452236-AB1 Italy452236-061Thailand452236-281 Latin America452236-161Turkey452236-141 Portugal452236-131The United Kingdom452236-031 Saudi Arabia452236-171The United States452236-001 South Korea452236-AD1 Keyboards for use only with Artist Edition computer models: Brazil 462753-201Portugal462753-131 Canadian French462753-121Saudi Arabia462753-171 Denmark, Finland, Norway, and Sweden462753-DH1South Korea462753-AD1 France462753-051Spain462753-071 Germany462753-041Taiwan462753-AB1 Italy462753-061Thailand462753-281 Japan462753-291Turkey462753-141 Latin America462753-161The United Kingdom462753-031 The Netherlands and Europe462753-B31The United States462753-001 Keyboard for use in the United States only with white Special Edition computer models463976-001 Keyboards for use only with Special Edition computer models with AMD processors: Japan 462549-291The United States462549-001 Component replacement procedures 75
Before removing the keyboard, follow these steps: 1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2.Disconnect all external devices connected to the computer. 3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4.Remove the battery (see Battery on page 56). Remove the keyboard: 1.Turn the computer upside down, with the front toward you. 2.Remove the three Phillips PM2.5×7.0 screws that secure the keyboard to the computer. 3.Turn the computer display-side up, with the front toward you. 4.Open the computer as far as possible. 5.Lift the rear edge of the keyboard (1) until it rests at an angle. 6.Release the keyboard (2) by sliding it back to disengage the tabs on the front edge of the keyboard from the top cover. 76 Chapter 4 Removal and replacement procedures
7.Lift the rear edge of the keyboard (3) and swing it forward until it rests on the palm rest. 8.Release the zero insertion force (ZIF) connector (1) to which the keyboard cable is attached and disconnect the keyboard cable (2) from the system board. 9.Remove the keyboard. Reverse this procedure to install the keyboard. Component replacement procedures 77
WWAN module CAUTION:The WWAN module and the WLAN module are not interchangeable. DescriptionSpare part number HP ev2210 1xEVDO-A WWAN module for use in the United States451131-001 HP UMTS/HSDPA/EDGE WWAN module, including GPRS 459350-001 CAUTION:To prevent an unresponsive system, replace the wireless module only with a wireless module authorized for use in the computer by the governmental agency that regulates wireless devices in your country or region. If you replace the module and then receive a warning message, remove the module to restore computer functionality, and then contact technical support through Help and Support. Before removing the WWAN module, follow these steps: 1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2.Disconnect all external devices connected to the computer. 3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4.Remove the battery (see Battery on page 56). 5.Remove the SIM (see SIM on page 69). 6.Remove the keyboard (see Keyboard on page 74). Remove the WWAN module: 1.Remove the two Phillips PM2.0×3.0 screws (1) that secure the WWAN module to the computer. (The edge of the module opposite the slot rises away from the computer.) 2.Disconnect the WWAN antenna cables (2) from the terminals on the WWAN module. NOTE:The red WWAN antenna cable is connected to the WWAN module “Main” terminal. The blue WWAN antenna cable is connected to the WWAN module “Aux” terminal. 78 Chapter 4 Removal and replacement procedures
3.Remove the WWAN module (3) by pulling the module away from the slot at an angle. NOTE:WWAN modules are designed with a notch to prevent incorrect installation. Reverse this procedure to install the WWAN module. Switch cover DescriptionSpare part number For use only in computer models with Intel processors: Switch cover (includes LED board and cable and power button board and cable)451312-001 Switch cover for use only with computer models sold at Best Buy (includes LED board and cable and power button board and cable)451599-001 Switch cover for use only with white Special Edition computer models (includes LED board and cable and power button board and cable)466187-001 Switch cover for use only with Artist Edition computers (includes LED board and cable and power button board and cable)462532-001 For use only in computer models with AMD processors: Switch cover (includes LED board and cable and power button board and cable) 455849-001 Before removing the switch cover, follow these steps: 1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2.Disconnect all external devices connected to the computer. 3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4.Remove the battery (see Battery on page 56). 5.Remove the keyboard (see Keyboard on page 74). Component replacement procedures 79
Remove the switch cover: 1.Remove the three Phillips PM2.5×9.0 screws (1) and the silver Phillips PM2.5×5.0 screw (2) that secure the switch cover to the computer. 2.Turn the computer display-side up, with the front toward you. 3.Open the computer as far as possible. 4.Disconnect the power button board cable (1) from the system board. 5.Release the ZIF connector to which the LED board cable (2) is connected and disconnect the cable from the system board. 6.Lift the front edge of the switch cover (1) to disengage it from the computer. 7.Release the switch cover (2) by sliding it to the right until it disengages from the computer. 80 Chapter 4 Removal and replacement procedures
8.Remove the switch cover (3). Reverse this procedure to install the switch cover. Component replacement procedures 81
Display assembly DescriptionSpare part number 14.1-inch, WXGA, BrightView, display assembly for use only with computer models equipped with a camera module (includes camera module, microphones, and WLAN transceivers and antenna cables)448604-001 14.1-inch, WXGA, BrightView, display assembly for use only with computer models not equipped with a camera module (includes microphones and WLAN transceivers and antenna cables)448603-001 14.1-inch, WXGA, BrightView, display assembly for use only with computer models sold at Best Buy (includes camera module, microphones, and WLAN transceivers and antenna cables)451906-001 14.1-inch, WXGA, BrightView, display assembly for use only with computer models with Intel processors and equipped with a WWAN module (includes camera module, camera module cable, microphones, and WLAN transceivers and antenna cables)451905-001 14.1-inch, WXGA, BrightView, display assembly for use only with Artist Edition computer models equipped with a camera module (includes microphones, and WLAN transceivers and antenna cables)462527-001 14.1-inch, WXGA, BrightView, display assembly for use only with white Special Edition computer models equipped with a camera module (includes microphones, and WLAN transceivers and antenna cables)466183-001 Before removing the display assembly, follow these steps: 1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2.Disconnect all external devices connected to the computer. 3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4.Remove the battery (see Battery on page 56). 5.Disconnect the wireless antenna cables from the WLAN module (see WLAN module on page 65). 6.Remove the following components: a.Keyboard (see Keyboard on page 74) b.Switch cover (see Switch cover on page 79) Remove the display assembly: 1.Close the computer and turn it upside down, with the rear panel toward you. 82 Chapter 4 Removal and replacement procedures