HP Pavilion Dv2800 Entertainment Notebook Pc Series Manual
Here you can view all the pages of manual HP Pavilion Dv2800 Entertainment Notebook Pc Series Manual. The HP manuals for Notebook are available online for free. You can easily download all the documents as PDF.
Page 111
3.Lift the speakers (3) straight up to remove them from the computer. Reverse this procedure to install the speaker assembly. Component replacement procedures 103
Page 112
Display switch module NOTE:The display switch module is included in the Display Hinge Kit, spare part number 430473-001 for computers with Intel processors, 455817-001 for computers with AMD processors. Before removing the display switch module, follow these steps: 1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2.Disconnect all external devices connected to the computer. 3.Disconnect the...
Page 113
4.Remove the top cover trim from the computer. The top cover trim is included in the Door/Cover Kit, spare part number 417073-001 for basic models, as well as using spare part number 430466-001 for computers with Intel processors and a Web cam, 465309-001 for metal-colored Special Edition models with Intel processors, 465310-001 for white Special Edition models, and 465311-001 for Artist Edition models. 5.Disconnect the display switch module cable (1) from the system board. 6.Remove the Phillips...
Page 114
System board NOTE:All system board spare part kits include replacement thermal material. DescriptionSpare part number For use in computer models with Intel processors: On dv2500 models equipped with a discrete graphics subsystem448596-001 On dv2500 models equipped with a UMA graphics subsystem448598-001 On dv2500 models equipped with a WWAN module457356-001 On dv2700 models equipped with a discrete graphics subsystem460715-001 On dv2700 models equipped with a UMA graphics subsystem460716-001 On dv2700...
Page 115
When replacing the system board, be sure that the following components are removed from the defective system board and installed on the replacement system board: ●RTC battery (see RTC battery on page 70) ●Memory modules (see Memory module on page 71) ●WLAN module (see WLAN module on page 65) ●Modem module (see Modem module on page 95) Remove the system board: 1.Disconnect the power connector cable (1) from the system board. 2.Remove the two Phillips PM2.5×5.0 screws (2) that secure the system board...
Page 116
When replacing the system board, be sure that the following components are removed from the defective system board and installed on the replacement system board: ●ExpressCard assembly (see ExpressCard assembly on page 109) ●Fan/heat sink assembly (see Fan/heat sink assembly on page 112) ●Processor (see Processor on page 115) Reverse the preceding procedure to install the system board. Power connector cable DescriptionSpare part number Power connector cable for use in computer models with Intel...
Page 117
2.Remove the connector frame (2) from the base enclosure. 3.Remove the power connector (1) from the connector frame. 4.Remove the modem connector (2) from the connector frame. Reverse this procedure to install the power connector cable and modem cable. ExpressCard assembly DescriptionSpare part number ExpressCard assembly417112-001 Before removing the ExpressCard assembly, follow these steps: 1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,...
Page 118
4.Remove the battery (see Battery on page 56). 5.Remove the following components: a.Hard drive (see Hard drive on page 61) b.Optical drive (see Optical drive on page 73) c.Keyboard (see Keyboard on page 74) d.Switch cover (see Switch cover on page 79) e.Display assembly (see Display assembly on page 82) f.Top cover (see Top cover on page 87) g.System board (see System board on page 106) Remove the ExpressCard assembly: 1.Lift the insulation material (1) from the system board to expose the...
Page 119
4.Remove the ExpressCard assembly from the system board. Reverse this procedure to install the ExpressCard assembly. Component replacement procedures 111
Page 120
Fan/heat sink assembly DescriptionSpare part number Fan/heat sink assembly for computer models with Intel processors equipped with a UMA graphics subsystem (includes thermal material)448625-001 Fan/heat sink assembly for use only with computer models with Intel processors equipped with a WWAN module (includes thermal material)450096-001 Fan/heat sink assembly for use only with computer models with AMD processors (includes thermal material)455843-001 NOTE:To properly ventilate the computer, allow at least...