HP Pavilion Dv2 1000 Entertainment Notebook Pc Series Manual

Memory module
DescriptionSpare part number
4096-MB517588-001
2048-MB506772-001
1024-MB506771-001
Before removing the memory module, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter...

5.Remove the module (2) by pulling it away from the slot at an angle.
NOTE:Memory modules are designed with a notch (3) to prevent incorrect insertion into the
memory module slot.
Reverse this procedure to install the memory module.
44 Chapter 4   Removal and replacement procedures 

WWAN module 
DescriptionSpare part number
WWAN module483377-002
Before removing the WWAN module, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.Remove the...

NOTE:The blue WWAN antenna cable connects to the “Aux” terminal. The red WWAN antenna
cable connects to the “Main” terminal.
5.Remove the two Phillips PM2.5x4.0 screws (2) that secure the WWAN module to the computer.
(The edge of the module opposite the slot rises away from the computer.)
6.Remove the WWAN module (3) by pulling it away from the slot at an angle.
NOTE:WWAN modules are designed with a notch (4) to prevent incorrect insertion into the
WWAN module slot.
Reverse this procedure to install the...

WLAN module
DescriptionSpare part number
Broadcom 4322 802.11a/b/g/n WLAN module for use in Antigua and Barbuda, Barbados, Belize,
Canada, the Cayman Islands, Guam, Puerto Rico, Trinidad and Tobago, the U.S. Virgin Islands,
and the United States504664-001
Broadcom 4322 802.11a/b/g/n WLAN module for use in Afghanistan, Albania, Algeria, Andorra,
Angola, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan,
the Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize,...

1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.Remove the battery (see 
Battery on page 39).
Remove the WLAN module:
CAUTION:To prevent an unresponsive system, replace the...

6.Remove the WLAN module (3) by pulling it away from the slot at an angle.
NOTE:WLAN modules are designed with a notch (4) to prevent incorrect insertion into the WLAN
module slot.
Reverse this procedure to install a WLAN module.
Component replacement procedures 49 

Keyboard
Keyboards—Espresso Black
For use in country or region
Spare part numberFor use in country or regionSpare part number
Belgium506782-A41Portugal506782-131
Brazil506782-201Russia506782-251
Denmark, Norway, and
Sweden506782-DH1Saudi Arabia506782-171
France506782-051South Korea506782-AD1
French Canada506782-121Spain506782-071
Germany506782-041Switzerland506782-111
Greece5067820-151Taiwan506782-AB1
Italy506782-061Thailand506782-281
Japan506782-291Turkey506782-141
Latin America506782-161The United...

3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.Remove the battery (see 
Battery on page 39).
5.Remove the following components:
a.Hard drive (see 
Hard drive on page 40)
b.Memory module (see 
Memory module on page 43)
c.WWAN module (see 
WWAN module on page 45)
d.WLAN module (see 
WLAN module on page 47)
Remove the keyboard:
1.Turn the computer upside down with the front toward you.
2.Remove one...

6.Slide the keyboard (2) back until the keyboard connector on the system board is accessible.
7.Release the zero insertion force (ZIF) connector (1) to which the keyboard cable is connected and
disconnect the cable (2) from the system board.
8.Remove the keyboard.
Reverse this procedure to install the keyboard.
52 Chapter 4   Removal and replacement procedures