HP Pavilion Dm4 1300 Entertainment Notebook Pc Series Manual

							Network icon is not displayed
If the network status icon is not displayed in the notification area after you configure the WLAN, the
software driver is either missing or corrupted. A Windows “Device not Found” error message may
also be displayed. The driver must be reinstalled.
Get the latest version of the WLAN device software and drivers for your computer from the HP Web
site at 
http://www.hp.com. If the WLAN device you are using was purchased separately, consult the
manufacturers Web site for the latest software.
To get the latest version of the WLAN device software for your computer, follow these steps:
1.Open your Web browser and go to 
http://www.hp.com/support.
2.Select your country or region.
3.Click the option for software and driver downloads, and then type your computer model number
in the Search box.
4.Press enter, and then follow the on-screen instructions.
NOTE:If the WLAN device you are using was purchased separately, consult the manufacturers
Web site for the latest software.
Current WLAN network security codes are unavailable
If you are prompted for a network key or a name (SSID) when connecting to a WLAN, the network is
protected by security. You must have the current codes to make a connection on a secure network.
The SSID and network key are alphanumeric codes that identify your computer to the network.
●For a network connected to your personal wireless router, review the router user guide for
instructions on setting up the same codes on both the router and the WLAN device.
●For a private network, such as a network in an office or at a public Internet chat room, contact
the network administrator to obtain the codes, and then enter the codes when prompted to do
so.
Some networks change the SSID or network keys used in their routers or access points on a
regular basis to improve security. You must change the corresponding code in your computer
accordingly.
If you are provided with new wireless network keys and SSID for a network, and if you have
previously connected to that network, follow these steps to connect to the network:
1.Select Start > Control Panel > Network and Internet > Network and Sharing Center.
2.Click Manage wireless networks in the left panel.
A list showing the available WLANs is displayed. If you are in a hotspot where several WLANs
are active, several are displayed.
3.Select the network in the list, right-click the network, and then click Properties.
NOTE:If the network you want is not listed, check with the network administrator to be sure
that the router or access point is operating.
4.Click the Security tab and enter the correct wireless encryption data into the Network security
key box.
5.Click OK to save these settings.
Troubleshooting wireless connection problems 21 
						

							WLAN connection is very weak
If the connection is very weak, or if your computer cannot make a connection to a WLAN, minimize
interference from other devices, as follows:
●Move your computer closer to the wireless router or access point.
●Temporarily disconnect devices such as a microwave, cordless phone, or cellular phone to be
sure that other wireless devices are not interfering.
If the connection does not improve, try forcing the device to reestablish all connection values:
1.Select Start > Control Panel > Network and Internet > Network and Sharing Center.
2.Click Manage wireless networks in the left panel.
A list showing the available WLANs is displayed. If you are in a hotspot where several WLANs
are active, several are displayed.
3.Click a network, and then click Remove.
Cannot connect to the wireless router
If you are trying to connect to the wireless router and are unsuccessful, reset the wireless router by
removing power from the router for 10 to 15 seconds.
If the computer still cannot make a connection to a WLAN, restart the wireless router. For details,
refer to the router manufacturers instructions.
Connecting to a local area network (LAN)
Connecting to a local area network (LAN) requires an 8-pin, RJ-45 network cable (purchased
separately). If the network cable contains noise suppression circuitry (1), which prevents interference
from TV and radio reception, orient the circuitry end of the cable (2) toward the device.
To connect the network cable:
WARNING!To reduce the risk of electric shock, fire, or damage to the equipment, do not plug a
modem cable or telephone cable into an RJ-45 (network) jack.
1.Plug the network cable into the network jack (1) on the computer.
22 Chapter 2   Networking 
						

							2.Plug the other end of the cable into a network wall jack (2).
Connecting to a local area network (LAN) 23 
						

							3 Pointing devices and keyboard
Using pointing devices
Setting pointing device preferences
Use Mouse Properties in Windows to customize settings for pointing devices, such as button
configuration, click speed, and pointer options.
To access Mouse Properties, select Start > Control Panel > Hardware and Sound > Mouse.
Using the TouchPad
Turning the TouchPad on and off
The TouchPad is turned on at the factory. To turn the TouchPad off or on, quickly double-tap the
TouchPad on/off button.
NOTE:The TouchPad is on when the TouchPad on/off button is off.
Navigating
To move the pointer, touch and slide your finger across the TouchPad in the direction you want the
pointer to go. Use the left and right TouchPad buttons like the corresponding buttons on an external
mouse. To scroll up and down using the TouchPad, touch and slide your finger up or down over the
TouchPad.
NOTE:If you are using the TouchPad to move the pointer, you must lift your finger off the
TouchPad before starting to scroll.
24 Chapter 3   Pointing devices and keyboard 
						

							Selecting
Use the left and right TouchPad buttons like the corresponding buttons on an external mouse.
Using pointing devices 25 
						

							Using TouchPad gestures
The TouchPad supports a variety of TouchPad gestures. To activate the TouchPad gestures, place
two fingers on the TouchPad at the same time as described in the following sections.
The TouchPad gestures described in this section are enabled at the factory. To disable or reenable
these gestures:
1.Double-click on the Synaptics icon in the notification area, at the far right of the taskbar, and
then click the Device Settings tab.
2.Select the device, and then click Settings.
3.Select the gesture that you want to disable or reenable.
4.Click Apply, and then click OK.
NOTE:Your computer also supports additional TouchPad features that are disabled at the
factory. To view and enable these features, click the Synaptics icon in the notification area, at
the far right of the taskbar, and then click the Device Settings tab. Select the device, and then
click Settings.
Scrolling
Scrolling is useful for moving up or down on a page or image. To scroll, place two fingers slightly
apart on the TouchPad and drag them across the TouchPad in an up, down, left, or right motion.
NOTE:Scrolling speed is controlled by finger speed.
Pinching/Zooming
Pinching allows you to zoom in or out on items such as PDFs, images, and photos.
To pinch:
●Zoom in by placing two fingers together on the TouchPad, and then moving them apart to
gradually increase the object’s size.
●Zoom out by placing two fingers apart on the TouchPad, and then moving them together to
gradually decrease the object’s size.
26 Chapter 3   Pointing devices and keyboard 
						

							Connecting an external mouse
You can connect an external USB mouse to the computer using one of the USB ports on the
computer. A USB mouse can also be connected to the system using the ports on an optional docking
device or expansion product.
Using the action keys
Action keys are customized actions that are assigned to specific keys at the top of the keyboard.
To use an action key, press and hold this key to activate the assigned action.
NOTE:Depending on the application you are using, pressing fn and one of the action keys will open
a specific shortcut menu within that application.
NOTE:The action key feature is enabled at the factory. You can disable this feature in Setup Utility
(BIOS) and revert back to pressing the fn key and one of the function keys to activate the assigned
function.
Icon Action Description
Help and Support Opens Help and Support, which provides information about your Windows operating
system and computer, answers to questions and tutorials, and updates to your
computer.
Help and Support also provides automated troubleshooting and links to support
specialists.
Screen brightness down Decreases the screen brightness level incrementally when you hold down this key.
Using the action keys 27 
						

							Icon Action Description
Screen brightness up Increases the screen brightness level incrementally when you hold down this key.
Switch screen image Switches the screen image among display devices connected to the system. For
example, if a monitor is connected to the computer, pressing this key alternates the
screen image from computer display to monitor display to simultaneous display on
both the computer and the monitor.
Most external monitors receive video information from the computer using the
external VGA video standard. The f4 action key can also alternate images among
other devices that are receiving video information from the computer.
Previous track/section Plays the previous track of an audio CD or the previous section of a DVD or a BD.
Play/pause Plays, pauses, or resumes an audio CD, a DVD, or a BD.
●If an audio CD, a DVD, or a BD is not playing, press this key to begin or
resume the play.
●If an audio CD, a DVD, or a BD is playing, press this key to pause the play.
Stop Stops audio or video playback of a CD, a DVD, or a BD.
Next track/section Plays the next track of an audio CD or the next section of a DVD or a BD.
Decrease volume Decreases speaker sound incrementally when you hold down this key.
Increase volume Increases speaker sound incrementally when you hold down this key.
Mute/restore volume Mutes or restores speaker sound.
Wireless Turns the wireless feature on or off.
NOTE:This key does not establish a wireless connection. To establish a wireless
connection, a wireless network must be set up.
Using the hotkeys
Hotkeys are combinations of the fn key (1) and either the esc key (2) or one of the arrow keys (3).
28 Chapter 3   Pointing devices and keyboard 
						

							Icon Function Hotkey Description
 Display system informationfn+escDisplays information about system hardware components
and the system BIOS version number.
Scroll upfn+up arrowScrolls the page up.
Scroll downfn+down arrowScrolls the page down.
Go homefn+left arrowReturns the cursor to the beginning of the line where the
cursor is located or returns to the beginning of the
document.
Go to the endfn+right arrowPlaces the cursor at the end of the line or scrolls to the end
of the document.
To use a hotkey command, follow either of these steps:
●Briefly press the fn key, and then briefly press the second key of the hotkey command.
– or –
●Press and hold down the fn key, briefly press the second key of the hotkey command, and then
release both keys at the same time.
Cleaning the TouchPad and keyboard
Dirt and grease on the TouchPad can cause the pointer to jump around on the screen. To avoid this,
clean the TouchPad with a damp cloth, and wash your hands frequently when using the computer.
WARNING!To reduce the risk of electric shock or damage to internal components, do not use a
vacuum cleaner attachment to clean the keyboard. A vacuum cleaner can deposit household debris
on the keyboard surface.
Clean the keyboard regularly to prevent keys from sticking and to remove dust, lint, and particles that
can become trapped beneath the keys. A can of compressed air with a straw extension can be used
to blow air around and under the keys to loosen and remove debris.
Cleaning the TouchPad and keyboard 29 
						

							30 Chapter 3   Pointing devices and keyboard