HP Pavilion Dm1 3000 Entertainment Notebook Pc Series Manual

							634861-001 Hard drive, 250 GB, 7200 rpm
634919-001 Hard drive, 500 GB, 7200 rpm
635301-001 Antennas (includes WLAN and WWAN antennas)
635302-001 Display back cover
635303-001 Base enclosure
635304-001 Display bezel
635305-001 Display cable
635306-001 Heat sink assembly
635307-001 Display hinge kit
635308-001 29.5 cm (11.6-in) (1366 x 768) HD BrightView LED display assembly
635309-001 Plastics kit (includes service cover)
635310-001 RTC battery (includes cable)
635311-001 Rubber kit
635312-001 Screw kit
635313-001 Speaker kit
635314-001 E350 system board with WWAN
635315-001 Thermal pads
635316-001 Top cover
635317-001 WebCam
635318-001 Keyboard for use in the United States
635318-031 Keyboard for use in the United Kingdom
635318-041 Keyboard for use in Germany
635318-051 Keyboard for use in France
635318-061 Keyboard for use in Italy
635318-071 Keyboard for use in Spain
635318-121 Keyboard for use in French Canada
635318-131 Keyboard for use in Portugal
635318-141 Keyboard for use in Turkey
635318-161 Keyboard for use in Latin America
635318-171 Keyboard for use in Saudi Arabia
635318-201 Keyboard for use in Brazil
635318-211 Keyboard for use in Hungary
635318-221 Keyboard for use in the Czech Republic
635318-251 Keyboard for use in Russia
635318-281 Keyboard for use in Thailand
ENWW Sequential part number listing 23 
						

							635318-291 Keyboard for use in Japan
635318-A41 Keyboard for use in Belgium
635318-AB1 Keyboard for use in Taiwan
635318-AD1 Keyboard for use in Korea
635318-B31 Keyboard for international use
635318-BB1 Keyboard for use in Israel
635318-BG1 Keyboard for use in Switzerland
635318-DH1 Keyboard for use in Norway
635318-DJ1 Keyboard for use in Greece
635737-001 Solid-state drive, 128-GB
636448-001 Power button board (includes cable)
636449-001 Top cover (includes TouchPad button board and cable)
636450-001 Hinge covers (upper and lower)
636451-001 Power connector (includes power connector cable)
636452-001 RJ-45 connector (includes RJ-45 connector cable)
636453-001 Fan (includes cable)
637177-001 Hard drive mounting kit (includes mounting bracket and screws)
639297-001 E350 system board with WWAN
639299-001 Verizon WLAN/WWAN antennas (includes cables)
639300-001 Display back cover
639301-001 Display bezel
639610-001 Verizon 29.5 cm (11.6-in) (1366 x 768) HD BrightView LED display assembly
641672-001 Hard drive, 320-GB, 7200 rpm
641673-001 Base enclosure
24 Chapter 3   Illustrated parts catalog ENWW 
						

							4 Removal and replacement procedures
Preliminary replacement requirements
Tools required
You will need the following tools to complete the removal and replacement procedures:
●Flat-bladed screwdriver
●Phillips P0 screwdriver
●Phillips P1 screwdriver
Service considerations
The following sections include some of the considerations that you must keep in mind during
disassembly and assembly procedures.
NOTE:As you remove each subassembly from the computer, place the subassembly (and all
accompanying screws) away from the work area to prevent damage.
Plastic parts
CAUTION:Using excessive force during disassembly and reassembly can damage plastic parts.
Use care when handling the plastic parts. Apply pressure only at the points designated in the
maintenance instructions.
Cables and connectors
CAUTION:When servicing the computer, be sure that cables are placed in their proper locations
during the reassembly process. Improper cable placement can damage the computer.
Cables must be handled with extreme care to avoid damage. Apply only the tension required to
unseat or seat the cables during removal and insertion. Handle cables by the connector whenever
possible. In all cases, avoid bending, twisting, or tearing cables. Be sure that cables are routed in
such a way that they cannot be caught or snagged by parts being removed or replaced. Handle flex
cables with extreme care; these cables tear easily.
ENWW Preliminary replacement requirements 25 
						

							Drive handling
CAUTION:Drives are fragile components that must be handled with care. To prevent damage to
the computer, damage to a drive, or loss of information, observe these precautions:
Before removing or inserting a hard drive, shut down the computer. If you are unsure whether the
computer is off or in Hibernation mode, turn on the computer, and then shut it down using the
operating system.
Before handling a drive, be sure that you are discharged of static electricity. While handling a drive,
avoid touching the connector.
Handle drives on surfaces that are covered with at least one inch of shock-proof foam.
Avoid dropping drives from any height onto any surface.
After removing a hard drive, an optical drive, or a diskette drive, place it in a static-proof bag.
Avoid exposing a hard drive to products that have magnetic fields, such as monitors or speakers.
Avoid exposing a drive to temperature extremes or liquids.
If a drive must be mailed, place the drive in a bubble pack mailer or other suitable form of protective
packaging and label the package “FRAGILE.”
26 Chapter 4   Removal and replacement procedures ENWW 
						

							Grounding guidelines
Electrostatic discharge damage
Electronic components are sensitive to electrostatic discharge (ESD). Circuitry design and structure
determine the degree of sensitivity. Networks built into many integrated circuits provide some
protection, but in many cases, ESD contains enough power to alter device parameters or melt
silicon junctions.
A discharge of static electricity from a finger or other conductor can destroy static-sensitive devices or
microcircuitry. Even if the spark is neither felt nor heard, damage may have occurred.
An electronic device exposed to ESD may not be affected at all and can work perfectly throughout a
normal cycle. Or the device may function normally for a while, then degrade in the internal layers,
reducing its life expectancy.
CAUTION:To prevent damage to the computer when you are removing or installing internal
components, observe these precautions:
Keep components in their electrostatic-safe containers until you are ready to install them.
Use non-magnetic tools.
Before touching an electronic component, discharge static electricity by using the guidelines
described in this section.
Avoid touching pins, leads, and circuitry. Handle electronic components as infrequently as possible.
If you remove a component, place it in an electrostatic-safe container.
The following table shows how humidity affects the electrostatic voltage levels that are generated by
different activities.
CAUTION:A product can be degraded by as little as 700 V.
Typical electrostatic voltage levels
 Relative humidity
Event 10% 40% 55%
Walking across carpet 35,000 V 15,000 V 7,500 V
Walking across vinyl floor 12,000 V 5,000 V 3,000 V
Motions of bench worker 6,000 V 800 V 400 V
Removing DIPS from plastic tube 2,000 V 700 V 400 V
Removing DIPS from vinyl tray 11,500 V 4,000 V 2,000 V
Removing DIPS from Styrofoam 14,500 V 5,000 V 3,500 V
Removing bubble pack from PCB 26,500 V 20,000 V 7,000 V
Packing PCBs in foam-lined box 21,000 V 11,000 V 5,000 V
ENWW Preliminary replacement requirements 27 
						

							Packaging and transporting guidelines
Follow these grounding guidelines when packaging and transporting equipment:
●To avoid hand contact, transport products in static-safe tubes, bags, or boxes.
●Protect ESD-sensitive parts and assemblies with conductive or approved containers or
packaging.
●Keep ESD-sensitive parts in their containers until the parts arrive at static-free workstations.
●Place items on a grounded surface before removing items from their containers.
●Always be properly grounded when touching a component or assembly.
●Store reusable ESD-sensitive parts from assemblies in protective packaging or non-conductive
foam.
●Use transporters and conveyors made of anti-static belts and roller bushings. Be sure that
mechanized equipment that is used for moving materials is wired to ground and that proper
materials are selected to avoid static charging. When grounding is not possible, use an ionizer to
dissipate electric charges.
Workstation guidelines
Follow these grounding workstation guidelines:
●Cover the workstation with approved static-shielding material.
●Use a wrist strap connected to a properly grounded work surface and use properly grounded
tools and equipment.
●Use conductive field service tools, such as cutters, screwdrivers, and vacuums.
●When fixtures must directly contact dissipative surfaces, use fixtures made only of static-safe
materials.
●Keep the work area free of non-conductive materials, such as ordinary plastic assembly aids and
Styrofoam.
●Handle ESD-sensitive components, parts, and assemblies by the case or PCM laminate. Handle
these items only at static-free workstations.
●Avoid contact with pins, leads, or circuitry.
●Turn off power and input signals before inserting or removing connectors or test equipment.
28 Chapter 4   Removal and replacement procedures ENWW 
						

							Equipment guidelines
Grounding equipment must include either a wrist strap or a foot strap at a grounded workstation.
●When seated, wear a wrist strap connected to a grounded system. Wrist straps are flexible
straps with a minimum of one megohm ±10% resistance in the ground cords. To provide proper
ground, wear a strap snugly against the skin at all times. On grounded mats with banana-plug
connectors, use alligator clips to connect a wrist strap.
●When standing, use foot straps and a grounded floor mat. Foot straps (heel, toe, or boot straps)
can be used at standing workstations and are compatible with most types of shoes or boots. On
conductive floors or dissipative floor mats, use foot straps on both feet with a minimum of one
megohm resistance between the operator and ground. To be effective, the conductive strips
must be worn in contact with the skin.
The following grounding equipment is recommended to prevent electrostatic damage:
●Antistatic tape
●Antistatic smocks, aprons, and sleeve protectors
●Conductive bins and other assembly or soldering aids
●Nonconductive foam
●Conductive tabletop workstations with ground cords of one megohm resistance
●Static-dissipative tables or floor mats with hard ties to the ground
●Field service kits
●Static awareness labels
●Material-handling packages
●Nonconductive plastic bags, tubes, or boxes
●Metal tote boxes
●Electrostatic voltage levels and protective materials
The following table lists the shielding protection that is provided by antistatic bags and floor mats.
Material Use Voltage protection level
Antistatic plastic Bags 1,500 V
Carbon-loaded plastic Floor mats 7,500 V
Metallized laminate Floor mats 5,000 V
ENWW Preliminary replacement requirements 29 
						

							Component replacement procedures
This chapter provides removal and replacement procedures.
Service tag
When ordering parts or requesting information, provide the computer serial number and model
description that is provided on the service tag.
(1) Product name: This is the product name that is affixed to the front of the computer.
(2) Serial number (s/n): This is an alphanumeric identifier that is unique to each product.
(3) Part number/Product number (p/n): This number provides specific information about the products
hardware components. The part number helps a service technician to determine what components
and parts are needed.
(4) Model description: This is the alphanumeric identifier used to locate documents, drivers, and
support for the computer.
(5) Warranty period: This number describes the duration of the warranty period for the computer.
30 Chapter 4   Removal and replacement procedures ENWW 
						

							Computer feet
The computer feet are adhesive-backed rubber pads that are attached to the base enclosure.
DescriptionSpare part number
Rubber Kit (includes computer feet – two rear) 635311–001
ENWW Component replacement procedures 31 
						

							Battery
DescriptionSpare part number
6-cell, 2.55-Ah (55-Wh) Li-ion battery  628419–001
Before removing the battery, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation mode,
turn on the computer, and then shut it down using the operating system.
2.Disconnect all of the external devices that are connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
Remove the battery:
To remove the battery, follow these steps:
1.Position the computer upside down on a flat surface, with the battery bay toward you.
2.Slide the battery release latch (1) to release the battery.
3.Remove the battery (2) from the computer.
Reverse this procedure to install the battery.
CAUTION:Removing a battery that is the sole power source for the computer can cause loss of
information. To prevent loss of information, save your work and initiate Hibernation mode or shut
down the computer using the operating system before removing the battery.
32 Chapter 4   Removal and replacement procedures ENWW