HP Pavilion 17 F200 Notebook Pc Series Manual

							If you have installed third-party software after you purchased your computer, regularly update the 
software. Software companies provide software updates to their products to correct security problems 
and improve functionality of the software.
Securing your wireless network
When you set up your wireless network, always enable security features. For more information, see 
Protecting your WLAN on page 20.
Backing up your software applications and information
Regularly back up your software applications and information to protect them from being permanently 
lost or damaged through a virus attack or a software or hardware failure. For more information, see 
Backing up, restoring, and recovering on page 63.
Using an optional security cable lock
A security cable lock, which is purchased separately, is designed to act as a deterrent, but it may not 
prevent the computer from being mishandled or stolen. Security cable locks are only one of several 
methods that should be employed as part of a complete security solution to help maximize theft 
protection.
The security cable slot on your computer may look slightly different from the illustration in this section. 
For the location of the security cable slot on your computer, see 
Getting to know your computer 
on page 5.
1.Loop the security cable lock around a secured object.
2.Insert the key (1) into the security cable lock (2).
3.Insert the security cable lock into the security cable slot on the computer (3), and then lock the 
security cable lock with the key.
4.Remove the key and keep it in a safe place.
Securing your wireless network59 
						

							9Using Setup Utility (BIOS) and HP PC Hardware Diagnostics (UEFI)
Setup Utility, or Basic Input/Output System (BIOS), controls communication between all the input and output devices on the system (such as disk drives, display, keyboard, mouse, and printer). Setup 
Utility (BIOS) includes settings for the types of devices installed, the startup sequence of the 
computer, and the amount of system and extended memory.
Starting Setup Utility (BIOS)
To start Setup Utility (BIOS), turn on or restart the computer, quickly press esc, and then press f10.
NOTE:Use extreme care when making changes in Setup Utility (BIOS). Errors can prevent the 
computer from operating properly.
Updating the BIOS
Updated versions of the BIOS may be available on the HP website.
Most BIOS updates on the HP website are packaged in compressed files called SoftPaqs.
Some download packages contain a file named Readme.txt, which contains information regarding  installing and troubleshooting the file.
Determining the BIOS version
To determine whether available BIOS updates contain later BIOS versions than those currently 
installed on the computer, you need to know the version of the system BIOS currently installed.
BIOS version information (also known as ROM date and System BIOS) can be revealed by pressing 
fn+esc (if you are already in Windows) or by using Setup Utility (BIOS).
1.Start Setup Utility (BIOS) (see Starting Setup Utility (BIOS) on page 60).
2.Use the arrow keys to select Main.
3.To exit Setup Utility (BIOS) without saving your changes, use the arrow keys to select Exit, 
select 
Exit Discarding Changes, and then press enter.
4.Select Yes.
60Chapter 9   Using Setup Utility (BIOS) and HP PC Hardware Diagnostics (UEFI)  
						

							Downloading a BIOS updateCAUTION:To reduce the risk of damage to the computer or an unsuccessful installation, download 
and install a BIOS update only when the computer is connected to reliable external power using the 
AC adapter. Do not download or install a BIOS update while the computer is running on battery 
power, docked in an optional docking device, or connected to an optional power source. During the 
download and installation, follow these instructions:
Do not disconnect power from the computer by unplugging the power cord from the AC outlet.
Do not shut down the computer or initiate Sleep.
Do not insert, remove, connect, or disconnect any device, cable, or cord.
1.From the Start screen, type hp support assistant, and then select the HP Support 
Assistant
 app.
2.Click Updates and tune-ups, and then click Check for HP updates now.
3.Follow the on-screen instructions.
4.At the download area, follow these steps:
a.Identify the most recent BIOS update and compare it to the BIOS version currently installed 
on your computer. If the update is more recent than your BIOS, make a note of the date, 
name, or other identifier. You may need this information to locate the update later, after it 
has been downloaded to your hard drive.
b.Follow the on-screen instructions to download your selection to the hard drive.
If the update is more recent than your BIOS, make a note of the path to the location on your 
hard drive where the BIOS update is downloaded. You will need to access this path when 
you are ready to install the update.
NOTE:If you connect your computer to a network, consult the network administrator before 
installing any software updates, especially system BIOS updates.
BIOS installation procedures vary. Follow any instructions that are revealed on the screen after the 
download is complete. If no instructions are revealed, follow these steps:
1.From the Start screen, type file, and then select File Explorer.
2.Click your hard drive designation. The hard drive designation is typically Local Disk (C:).
3.Using the hard drive path you recorded earlier, open the folder on your hard drive that contains 
the update.
4.Double-click the file that has an .exe extension (for example, filename.exe).
The BIOS installation begins.
5.Complete the installation by following the on-screen instructions.
NOTE:After a message on the screen reports a successful installation, you can delete the 
downloaded file from your hard drive.Updating the BIOS61    
						

							Using HP PC Hardware Diagnostics (UEFI)
HP PC Hardware Diagnostics is a Unified Extensible Firmware Interface (UEFI) that allows you to run 
diagnostic tests to determine whether the computer hardware is functioning properly. The tool runs 
outside the operating system so that it can isolate hardware failures from issues that are caused by 
the operating system or other software components.
To start HP PC Hardware Diagnostics UEFI:
1.Turn on or restart the computer, quickly press esc, and then press f2.
The BIOS searches three places for the diagnostic tools, in the following order:
a.Connected USB drive
NOTE:To download the HP PC Hardware Diagnostics (UEFI) tool to a USB drive, see 
Downloading HP PC Hardware Diagnostics (UEFI) to a USB device on page 62.
b.Hard drive
c.BIOS
2.When the diagnostic tool opens, use the keyboard arrow keys to select the type of diagnostic 
test you want to run, and then follow the on-screen instructions.
NOTE:If you need to stop a diagnostic test, press esc.
Downloading HP PC Hardware Diagnostics (UEFI) to a USB device
NOTE:Instructions for downloading HP PC Hardware Diagnostics (UEFI) are provided in English 
only.
Option 1: HP PC Diagnostics homepage— Provides access to the latest UEFI version
1.Go to http://hp.com/go/techcenter/pcdiags.
2.Click Download link, and then select Run.
Option 2: Support and Drivers page—Provides downloads for a specific product for earlier and later 
versions
1.Go to http://www.hp.com.
2.Point to Support, located at the top of the page, and then click Download Drivers.
3.In the text box, enter the product name, and then click Go.
– or –
Click Find Now to let HP automatically detect your product.
4.Select your computer model, and then select your operating system.
5.In the Diagnostic section, click HP UEFI Support Environment.
– or –
Click Download, and then select Run.
62Chapter 9   Using Setup Utility (BIOS) and HP PC Hardware Diagnostics (UEFI)    
						

							10Backing up, restoring, and recovering
This chapter provides information about the following processes. The information in the chapter is 
standard procedure for most models.
●Creating recovery media and backups
●Restoring and recovering your system
For additional information, refer to the HP Support Assistant.
▲From the Start screen, type support, and then select the HP Support Assistant app.
- or -
From the Windows desktop, click the question mark icon in the notification area, at the far right 
of the taskbar.
Creating recovery media and backups
The following methods of creating recovery media and backups are available on select models only. 
Choose the available method according to your computer model.
●Use HP Recovery Manager after you successfully set up the computer to create HP Recovery 
media. This step creates a backup of the HP Recovery partition on the computer. The backup 
can be used to reinstall the original operating system in cases where the hard drive is corrupted 
or has been replaced. For information on creating recovery media, see 
Creating HP Recovery 
media (select models only) on page 63. For information on the recovery options that are 
available using the recovery media, see 
Recovering using HP Recovery Manager on page 65.
●Use Windows tools to create system restore points and create backups of personal information. 
For more information, see Using Windows tools on page 64.
NOTE:If storage is 32 GB or less, Microsoft System Restore is disabled by default.
Creating HP Recovery media (select models only)
IMPORTANT:If your computer does not list a Recovery Media Creation option, you can obtain 
recovery media for your system from support. See the 
Worldwide Telephone Numbers booklet 
included with the computer. You can also find contact information from the HP website. Go to 
http://www.hp.com/support, select your country or region, and follow the on-screen instructions.
HP Recovery Manager is a software program that allows you to create recovery media after you 
successfully set up the computer. HP Recovery media can be used to perform system recovery if the 
hard drive becomes corrupted. System recovery reinstalls the original operating system and the 
software programs installed at the factory and then configures the settings for the programs. HP 
Recovery media can also be used to customize the system or restore the factory image if you replace 
the hard drive.
●Only one set of recovery media can be created. Handle these recovery tools carefully, and keep 
them in a safe place.
●HP Recovery Manager examines the computer and determines the required storage capacity for 
the media that will be required.
Creating recovery media and backups63   
						

							●To create recovery discs, your computer must have an optical drive with DVD writer capability, 
and you must use only high-quality blank DVD-R, DVD+R, DVD-R DL, or DVD+R DL discs. Do 
not use rewritable discs such as CD±RW, DVD±RW, double-layer DVD±RW, or BD-RE 
(rewritable Blu-ray) discs; they are not compatible with HP Recovery Manager software. Or, 
instead, you can use a high-quality blank USB flash drive. 
●If your computer does not include an integrated optical drive with DVD writer capability, but you 
would like to create DVD recovery media, you can use an external optical drive (purchased 
separately) to create recovery discs, or you can obtain recovery discs for your computer from 
support. See the 
Worldwide Telephone Numbers booklet included with the computer. You can 
also find contact information from the HP website. Go to 
http://www.hp.com/support, select your 
country or region, and follow the on-screen instructions. If you use an external optical drive, it 
must be connected directly to a USB port on the computer; the drive cannot be connected to a 
USB port on an external device, such as a USB hub.
●Be sure that the computer is connected to AC power before you begin creating the recovery  media.
●The creation process can take an hour or more. Do not interrupt the creation process.
●If necessary, you can exit the program before you have finished creating all of the recovery 
DVDs. HP Recovery Manager will finish burning the current DVD. The next time you start HP 
Recovery Manager, you will be prompted to continue, and the remaining discs will be burned.
To create HP Recovery media:
IMPORTANT:For tablets with a detachable keyboard, connect the keyboard to the keyboard dock 
before beginning these steps (select models only).
1.From the Start screen, type recovery, and then select HP Recovery Manager.
2.Select Recovery Media Creation, and then follow the on-screen instructions.
If you ever need to recover the system, see Recovering using HP Recovery Manager on page 65.
Using Windows tools
You can create system restore points and create backups of personal information using Windows  tools. 
NOTE:If storage is 32 GB or less, Microsoft System Restore is disabled by default.
▲From the Start screen, type help, and then select Help and Support.
‒ or –
From the Windows desktop, click the question mark icon in the notification area, at the far right  of the taskbar.
For more information and steps, see Help and Support.
Restore and recovery
There are several options for recovering your system. Choose the method that best matches your 
situation and level of expertise:
IMPORTANT:Not all methods are available on all models.64Chapter 10   Backing up, restoring, and recovering    
						

							●Windows offers several options for restoring from backup, refreshing the computer, and resetting 
the computer to its original state. For more information see Help and Support.
▲From the Start screen, type support, and then select the HP Support Assistant app.
- or -
From the Windows desktop, click the question mark icon in the notification area, at the far 
right of the taskbar.
●If you need to correct a problem with a preinstalled application or driver, use the Drivers and 
Applications Reinstall option of HP Recovery Manager to reinstall the individual application or 
driver.
▲From the Start screen, type recovery, select HP Recovery Manager, select Drivers and 
Applications Reinstall
, and then follow the on-screen instructions.
●On select models, if you want to reset your computer using a minimized image, you can choose 
the HP Minimized Image Recovery option from the HP Recovery partition or HP Recovery 
media. Minimized Image Recovery installs only drivers and hardware-enabling applications. 
Other applications included in the image continue to be available for installation through the 
Drivers and Applications Reinstall option in HP Recovery Manager.
For more information, see Recovering using HP Recovery Manager on page 65.
●If you want to recover the Windows partition to original factory content, you can choose the 
System Recovery option from the HP Recovery partition (select models only) or use the HP 
Recovery media. For more information, see 
Recovering using HP Recovery Manager 
on page 65. If you have not already created recovery media, see Creating HP Recovery media 
(select models only) on page 63.
●On select models, if you want to recover the computer's original factory partition and content , or 
if you have replaced the hard drive, you can use the Factory Reset option of HP Recovery 
media. For more information, see 
Recovering using HP Recovery Manager on page 65.
●On select models, if you want to remove the recovery partition to reclaim hard drive space, HP 
Recovery Manager offers the Remove Recovery Partition option.
For more information, see Removing the HP Recovery partition (select models only) 
on page 67.
Recovering using HP Recovery Manager
HP Recovery Manager software allows you to recover the computer to its original factory state by 
using the HP Recovery media that you either created or that you obtained from support, or by using 
the HP Recovery partition (select models only). If you have not already created recovery media, see 
Creating HP Recovery media (select models only) on page 63.
What you need to know before you get started
●HP Recovery Manager recovers only software that was installed at the factory. For software not 
provided with this computer, you must either download the software from the manufacturer's 
website or reinstall the software from the media provided by the manufacturer.
IMPORTANT:Recovery through HP Recovery Manager should be used as a final attempt to 
correct computer issues.
●HP Recovery media must be used if the computer hard drive fails. If you have not already 
created recovery media, see 
Creating HP Recovery media (select models only) on page 63.
Restore and recovery65  
						

							●To use the Factory Reset option (select models only), you must use HP Recovery media. If you 
have not already created recovery media, see 
Creating HP Recovery media (select models only) 
on page 63.
●If your computer does not allow the creation of HP Recovery media or if the HP Recovery media 
does not work, you can obtain recovery media for your system from support. See the 
Worldwide 
Telephone Numbers
 booklet included with the computer. You can also find contact information 
from the HP website. Go to 
http://www.hp.com/support, select your country or region, and follow 
the on-screen instructions.
IMPORTANT:HP Recovery Manager does not automatically provide backups of your personal 
data. Before beginning recovery, back up any personal data you want to retain.
Using HP Recovery media, you can choose from one of the following recovery options:
NOTE:Only the options available for your computer display when you start the recovery process.
●System Recovery—Reinstalls the original operating system, and then configures the settings for 
the programs that were installed at the factory.
●Minimized Image Recovery (select models only)—Reinstalls the operating system and all 
hardware-related drivers and software, but not other software applications.
●Factory Reset—Restores the computer to its original factory state by deleting all information 
from the hard drive and re-creating the partitions. Then it reinstalls the operating system and the 
software that was installed at the factory.
The HP Recovery partition (select models only) allows System Recovery and Minimized Image 
Recovery (select models only).
Using the HP Recovery partition (select models only)
The HP Recovery partition allows you to perform a system recovery or minimized image recovery 
(select models only) without the need for recovery discs or a recovery USB flash drive. This type of 
recovery can be used only if the hard drive is still working.
To start HP Recovery Manager from the HP Recovery partition:
IMPORTANT:For tablets with a detachable keyboard, connect the keyboard to the keyboard dock 
before beginning these steps (select models only).
1.From the Start screen, type recovery, select Recovery Manager, and then select HP Recovery 
Environment
.
- or-
Press f11 while the computer boots, or press and hold f11 as you press the power button.
2.Select Troubleshoot from the boot options menu.
3.Select Recovery Manager, and then follow the on-screen instructions.
Using HP Recovery media to recover
You can use HP Recovery media to recover the original system. This method can be used if your 
system does not have an HP Recovery partition or if the hard drive is not working properly.
66Chapter 10   Backing up, restoring, and recovering    
						

							1.If possible, back up all personal files.
2.Insert the HP Recovery media, and then restart the computer.
NOTE:If the computer does not automatically restart in HP Recovery Manager, change the 
computer boot order. See 
Changing the computer boot order on page 67.
3.Follow the on-screen instructions.
Changing the computer boot order
If your computer does not restart in HP Recovery Manager, you can change the computer boot order, 
which is the order of devices listed in BIOS where the computer looks for startup information. You can 
change the selection for an optical drive or a USB flash drive.
To change the boot order:
IMPORTANT:For tablets with a detachable keyboard, connect the keyboard to the keyboard dock 
before beginning these steps (select models only).
1.Insert the HP Recovery media.
2.Start Computer Setup:
For computers or tablets with keyboards attached:
▲Turn on or restart the computer or tablet, quickly press esc, and then press f9 for boot 
options.
For computers or tablets without keyboards attached:
▲Turn on or restart the computer, quickly press the volume down button, and then tap f9 for 
boot options.
- or -
Turn on or restart the computer, quickly press the Windows button, and then tap f9 for boot 
options.
3.Select the optical drive or USB flash drive from which you want to boot.
4.Follow the on-screen instructions.
Removing the HP Recovery partition (select models only)
HP Recovery Manager software allows you to remove the HP Recovery partition to free up hard drive  space.
IMPORTANT:After you remove the HP Recovery partition, you can no longer use the Windows 
Refresh option or the Windows option to remove everything and reinstall Windows. In addition, you 
will not be able to perform System Recovery or Minimized Image Recovery from the HP Recovery 
partition. So before you remove the Recovery partition, create HP Recovery media; see 
Creating HP 
Recovery media (select models only) on page 63.
Follow these steps to remove the HP Recovery partition:
1.From the Start screen, type recovery, and then select HP Recovery Manager.
2.Select Remove Recovery Partition, and then follow the on-screen instructions.
Restore and recovery67    
						

							11Specifications
Input power 
The power information in this section may be helpful if you plan to travel internationally with the 
computer.
The computer operates on DC power, which can be supplied by an AC or a DC power source. The 
AC power source must be rated at 100–240 V, 50–60 Hz. Although the computer can be powered 
from a standalone DC power source, it should be powered only with an AC adapter or a DC power 
source supplied and approved by HP for use with this computer.
The computer can operate on DC power within the following specifications. Operating voltage and  current varies by platform.
Input powerRatingOperating voltage and current19.5 V dc @ 2.31 A – 45 W
19.5 V dc @ 3.33 A – 65W
19.5 V dc @ 4.62 A – 90 W
DC plug of external HP power supplyNOTE:This product is designed for IT power systems in Norway with phase-to-phase voltage not 
exceeding 240 V rms.NOTE:The computer operating voltage and current can be found on the system regulatory label.68Chapter 11   Specifications