HP Pavilion 15 P200 Notebook Pc Series Manual

							Top-edge swipe and bottom-edge swipe
The top-edge swipe or bottom-edge swipe displays app command options that allow you to customize apps.
IMPORTANT:When an app is open, the top-edge gesture varies depending on the app.
●Gently swipe your finger from the top edge or the bottom edge to reveal the app command 
options.
Using the keyboard and mouse
The keyboard and mouse allow you to type, select items, scroll and to perform the same functions as 
you do using touch gestures. The keyboard also allows you to use action keys and hot keys to 
perform specific functions.
TIP:The Windows key  on the keyboard allows you to quickly return to the Start screen from 
an open app or the Windows desktop. Pressing the Windows key again will return you to the previous 
screen.NOTE:Depending on the country or region, your keyboard may have different keys and keyboard 
functions than those discussed in this section.
Using the keys
You can quickly access information or perform functions by using certain keys and key combinations.
Using the keyboard and mouse39    
						

							Using the action keys
An action key performs an assigned function. The icon on each of the f1 through f4 keys, the f5 key 
(select models only), and the 
f6 through f12 keys illustrates the assigned function for that key.
To use an action key function, press and hold the key.
The action key feature is enabled at the factory. You can disable this feature in Setup Utility (BIOS).  See 
Using Setup Utility (BIOS) and HP PC Hardware Diagnostics (UEFI) on page 60 for 
instructions on opening Setup Utility (BIOS), and then follow the instructions at the bottom of the  screen.
After you have disabled the action key feature, you can still perform each function by pressing the fn 
key in combination with the appropriate action key.
CAUTION:Use extreme care when making changes in Setup Utility (BIOS). Errors can prevent the 
computer from operating properly.IconKeyDescriptionf1Opens Help and Support, which provides tutorials, information about the Windows operating 
system and your computer, answers to questions, and updates to your computer.
Help and Support also provides automated troubleshooting tools and access to support.
f2Decreases the screen brightness incrementally as long as you hold down the key.f3Increases the screen brightness incrementally as long as you hold down the key.f4Switches the screen image between display devices connected to the system. For example, if 
a monitor is connected to the computer, repeatedly pressing this key alternates the screen 
image from the computer display to the monitor display to a simultaneous display on both the 
computer and the monitor.f5On select models, turns the keyboard backlight feature off or on.NOTE:To conserve battery power, turn off this feature.f6Mutes or restores speaker sound.f7Decreases speaker volume incrementally as long as you hold down the key.f8Increases speaker volume incrementally as long as you hold down the key.f9Plays the previous track of an audio CD or the previous section of a DVD or a BD.f10Begins, pauses, or resumes playback of an audio CD, a DVD, or a BD.f11Plays the next track of an audio CD or the next section of a DVD or a BD.f12Turns the wireless feature on or off.NOTE:A wireless network must be set up before a wireless connection is possible.40Chapter 5   Navigating the screen  
						

							Using Windows shortcut keys
Windows provides shortcuts so that you can perform actions quickly. Press the Windows key 
alone or in combination with a specific key to perform a designated action.
Using the hot keys
A hot key is a combination of the fn key and the esc key or the b key.
To use a hot key:
▲Briefly press the fn key, and then briefly press the second key of the combination.
Using the integrated numeric keypad
The computer includes an integrated numeric keypad, and it also supports an optional external 
numeric keypad or an optional external keyboard that includes a numeric keypad. For more details 
about the integrated numeric keypad, see 
Keys on page 15.
ComponentDescriptionnum lock keyControls the function of the integrated numeric keypad. Press the 
key to alternate between the standard numeric function found on 
an external keypad (this function is turned on at the factory) and 
the navigational function (indicated by the directional arrows on 
the keys).NOTE:The keypad function that is active when the computer is 
turned off is reinstated when the computer is turned back on.Integrated numeric keypadSet at the factory to function like an external numeric keypad. To 
alternate between this numeric function and the navigational 
function (indicated by the directional arrows on the keys), press 
the 
num lock key.
Using the keyboard and mouse41 
						

							6Managing power
Your computer can operate on either battery power or external power. When the computer is running on battery power only and an AC power source is not available to charge the battery, it is important to 
monitor and conserve the battery charge. Your computer supports an optimal power plan to manage 
how your computer uses and conserves power so that computer performance is balanced with power 
conservation.
Initiating Sleep and Hibernation
Microsoft® Windows has two power-saving states, Sleep and Hibernation.
●Sleep—The Sleep state is automatically initiated after a period of inactivity when running on 
battery power or on external power. Your work is saved to memory, allowing you to resume your 
work very quickly. You can also initiate Sleep manually. For more information, see 
Manually 
initiating and exiting Sleep on page 43.
●Hibernation—The Hibernation state is automatically initiated if the battery reaches a critical level. 
In the Hibernation state, your work is saved to a hibernation file and the computer powers down.
NOTE:You can manually initiate Hibernation. See Manually initiating and exiting Sleep 
on page 43 and Manually initiating and exiting Hibernation (select models only) on page 43.
CAUTION:To reduce the risk of possible audio and video degradation, loss of audio or video 
playback functionality, or loss of information, do not initiate Sleep while reading from or writing to a 
disc or an external media card.NOTE:You cannot initiate any type of networking connection or perform any computer functions 
while the computer is in the Sleep state or in Hibernation.42Chapter 6   Managing power    
						

							Manually initiating and exiting Sleep
You can initiate Sleep in any of the following ways:
●Close the display.
●From the Start screen, point to the upper-right or lower-right corner of the screen to reveal the 
charms. Click 
Settings, click the Power icon, and then click Sleep.
To exit Sleep:
●Briefly press the power button.
●If the display is closed, open the display.
●Press a key on the keyboard.
●Tap or swipe the TouchPad.
When the computer exits Sleep, the power lights turn on and your work returns to the screen.
NOTE:If you have set a password to be required on wakeup, you must enter your Windows 
password before the computer will return to the screen.
Manually initiating and exiting Hibernation (select models only)
You can enable user-initiated Hibernation and change other power settings and timeouts using Power  Options.
1.From the Start screen, type power options, then select Power options.
2.In the left pane, click Choose what the power button does.
3.Click Change Settings that are currently unavailable.
4.In the When I press the power button area, select Hibernate.
5.Click Save changes.
When the computer exits Hibernation, the power lights turn on and your work returns to the screen.
NOTE:If you have set a password to be required on wakeup, you must enter your Windows 
password before your work will return to the screen.
Setting password protection on wakeup
To set the computer to prompt for a password when the computer exits Sleep or Hibernation, follow 
these steps:
1.From the Start screen, type power options, then select Power options.
2.In the left pane, click Require a password on wakeup.
3.Click Change Settings that are currently unavailable.
4.Click Require a password (recommended).
NOTE:If you need to create a user account password or change your current user account 
password, click 
Create or change your user account password, and then follow the on-screen 
instructions. If you do not need to create or change a user account password, go to step 5.
5.Click Save changes.
Initiating Sleep and Hibernation43    
						

							Using the power meter and power settings
The power meter is located on the Windows desktop. The power meter allows you to quickly access power settings and view the remaining battery charge.
●To reveal the percentage of remaining battery charge and the current power plan, on the Windows desktop, point over the power meter icon.
●To use Power Options, click the power meter icon and select an item from the list. From the 
Start screen, you can also type 
power options, and then select Power Options.
Different power meter icons indicate whether the computer is running on battery or external power.  The icon also reveals a message if the battery has reached a low or critical battery level.
Running on battery power
When a charged battery is in the computer and the computer is not plugged into external power, the 
computer runs on battery power. If the computer has a charged battery installed and the AC adapter 
is disconnected from the computer, the computer automatically switches to battery power and the 
screen brightness decreases to conserve battery life. The battery in the computer slowly discharges 
when the computer is off and unplugged from external power.
Computer battery life varies, depending on power management settings, programs running on the 
computer, screen brightness, external devices connected to the computer, and other factors.
Removing a user-replaceable battery
WARNING!To reduce potential safety issues, use only the user-replaceable battery provided with 
the computer, a replacement battery provided by HP, or a compatible battery purchased from HP.CAUTION:Removing a user-replaceable battery that is the sole power source for the computer can 
cause loss of information. To prevent loss of information, save your work or shut down the computer 
through Windows before removing the battery.
1.Turn the computer upside down on a flat surface.
2.Slide the battery lock (1) to unlock the battery, and then slide the battery release latch (2) to 
release the battery.
NOTE:The battery release latch automatically returns to its original position.44Chapter 6   Managing power    
						

							3.Pivot the battery upward (3) and remove it from the computer (4).
Finding battery information
To monitor the status of your battery, or if the battery is no longer holding a charge, run Battery Check 
in HP Support Assistant. To access battery information, from the Start screen, type 
support, select 
the 
HP Support Assistant app, and then select Battery and performance.
HP Support Assistant provides the following tools and information about the battery:
●Battery test
●Information about battery types, specifications, life cycles, and capacity
Conserving battery power
Tips for conserving battery power and maximizing battery life:
●Lower the brightness on the display.
●Select the Power saver setting in Power Options.
●Remove a user-replaceable battery from the computer if it will not be used or charged for more 
than 2 weeks.
●Turn off wireless devices when you are not using them.
●Disconnect unused external devices that are not plugged into an external power source, such as 
an external hard drive connected to a USB port.
●Stop, disable, or remove any external media cards that you are not using.
●Before you leave your work, initiate Sleep or shut down the computer.
Identifying low battery levels
When a battery that is the sole power source for the computer reaches a low or critical battery level, 
the following behavior occurs:
●The battery light (select models only) indicates a low or critical battery level.
– or –
Running on battery power45 
						

							●The power meter icon on the Windows desktop shows a low or critical battery notification.NOTE:For additional information about the power meter, see Using the power meter and 
power settings on page 44.
The computer takes the following actions for a critical battery level:
●If Hibernation is disabled and the computer is on or in the Sleep state, the computer remains 
briefly in the Sleep state, and then shuts down and loses any unsaved information.
●If Hibernation is enabled and the computer is on or in the Sleep state, the computer initiates 
Hibernation.
Resolving a low battery level
Resolving a low battery level when external power is available
●Connect an AC adapter.
●Connect an optional docking or expansion device.
●Connect an optional power adapter purchased as an accessory from HP.
Resolving a low battery level when no power source is available
Save your work and shut down the computer.
Resolving a low battery level when the computer cannot exit Hibernation
When the computer lacks sufficient power to exit Hibernation, follow these steps:
1.Replace the discharged user-replaceable battery with a charged battery, or connect the AC 
adapter to the computer and to external power.
2.Exit Hibernation by pressing the power button.
Storing a user-replaceable battery
CAUTION:To reduce the risk of damage to a battery, do not expose it to high temperatures for 
extended periods of time.
If a computer will be unused and unplugged from external power for more than 2 weeks, remove the 
battery and store it separately in a cool, dry place to prolong the battery charge.
A stored battery should be checked every 6 months. If the capacity is less than 50 percent, recharge 
the battery before returning it to storage.
Disposing of a user-replaceable battery
WARNING!To reduce the risk of fire or burns, do not disassemble, crush, or puncture; do not short 
external contacts; do not dispose of in fire or water.
See the Regulatory, Safety and Environmental Notices for proper battery disposal. To access this 
guide, from the Start screen, type 
support, and then select the HP Support Assistant app.
Replacing a user-replaceable battery
Battery Check in HP Support Assistant notifies you to replace the battery when an internal cell is not 
charging properly or when the battery storage capacity has reached a weak condition. If the battery is 
46Chapter 6   Managing power    
						

							possibly covered by an HP warranty, instructions include a warranty ID. A message refers you to the 
HP website for more information about ordering a replacement battery.
Running on external AC power
For information about connecting to AC power, refer to the Setup Instructions poster provided in the 
computer box.
The computer does not use battery power when the computer is connected to AC external power with  an approved AC adapter or an optional docking/expansion device.
WARNING!To reduce potential safety issues, use only the AC adapter provided with the computer, 
a replacement AC adapter provided by HP, or a compatible AC adapter purchased from HP.
Connect the computer to external AC power under any of the following conditions:
WARNING!Do not charge the computer battery while you are onboard aircraft.
●When charging or calibrating a battery
●When installing or modifying system software
●When writing information to a disc (select models only)
●When running Disk Defragmenter on computers with internal hard drives
●When performing a backup or recovery
When you connect the computer to external AC power:
●The battery begins to charge.
●The screen brightness increases.
●The power meter icon on the Windows desktop changes appearance.
When you disconnect external AC power, the following events occur:
●The computer switches to battery power.
●The screen brightness automatically decreases to save battery life.
●The power meter icon on the Windows desktop changes appearance.
Troubleshooting power problems
Test the AC adapter if the computer exhibits any of the following symptoms when it is connected to 
AC power:
●The computer does not turn on.
●The display does not turn on.
●The power lights are off.
To test the AC adapter:
1.Shut down the computer.
2.Connect the AC adapter to the computer, and then plug it into an AC outlet.
3.Turn on the computer.
Running on external AC power47   
						

							●If the power lights turn on, the AC adapter is working properly.
●If the power lights remain off, check the connection from the AC adapter to the computer 
and the connection from the AC adapter to the AC outlet to be sure that the connections 
are secure.
●If the connections are secure and the power lights remain off, the AC adapter is not 
functioning and should be replaced.
Contact support for information about obtaining a replacement AC power adapter.
HP CoolSense (select models only)
HP CoolSense  automatically detects when the computer is not on a horizontal surface and 
adjusts performance and fan settings to keep the surface temperature of your computer at the 
optimum level of comfort.
When HP CoolSense is off, the position of the computer is not detected and the performance and fan 
options remain at the factory setting. As a result, the surface temperature of the computer might be 
higher than it would be with HP CoolSense on.
To turn CoolSense off or on, follow these steps:
▲From the Start screen, type coolsense, and then select HP CoolSense.
Shutting down (turning off) the computer
CAUTION:Unsaved information is lost when the computer shuts down. Be sure to save your work 
before shutting down the computer.
The Shut down command closes all open programs, including the operating system, and then turns 
off the display and computer.
Shut down the computer under any of the following conditions:
●When you need to replace the battery or access components inside the computer
●When you are connecting an external hardware device that does not connect to a USB or video 
port
●When the computer will be unused and disconnected from external power for an extended 
period
Although you can turn off the computer with the power button, the recommended procedure is to use 
the Windows Shut down command:
NOTE:If the computer is in the Sleep state or in Hibernation, you must first exit Sleep or 
Hibernation before shutdown is possible by briefly pressing the power button.
1.Save your work and close all open programs.
2.From the Start screen, point to the upper-right or lower-right corner of the screen to reveal the  charms.
3.Click Settings, click the Power icon, and then click Shut down.
– or –
48Chapter 6   Managing power