HP Pavilion 15 Bc200 Notebook Pc Manual
Here you can view all the pages of manual HP Pavilion 15 Bc200 Notebook Pc Manual. The HP manuals for Notebook are available online for free. You can easily download all the documents as PDF.
Page 71
2.Starting on the top edge (1), loosen the display bezel, disconnecting the plastic clips to release the edge of the bezel. Continue on the left and right edges (2) and then bottom edge (3), and then lift the display bezel (4) to remove it. NOTE:The webcam can be removed after removing the display bezel (see Webcam on page 67) and before removing the display panel. 3.Remove 4 Phillips 2.0x2.5 screws from the display panel (1), and then lift the display panel (2) to remove it. Component replacement...
Page 72
4.Rotate the display panel (1), disconnect the display cable (2) from the display panel (3), and then lift the display panel (4) to remove it. 5.Remove 1 Phillips 2.5x6.0 screw from the top of each hinge bracket (1) and 3 Phillips 2.5x6.0 screws from each hinge (2), remove the hinge brackets from the back cover (3), and then lift the hinge brackets (4) to remove them. 64Chapter 5 Removal and replacement procedures for authorized service provider parts
Page 73
6.Remove 1 Phillips 2.0x2.0 screw from each hinge bracket (1), and then separate the hinge caps from the hinge brackets. 7.Remove 1 Phillips 2.0x2.0 screw from each hinge (1), and then lift the hinges(2) to remove them. Component replacement procedures65
Page 74
8.Remove the WLAN antennas from the back cover (1), release the WLAN cable from the routing channels (2), and then lift the antennas and cable to remove them(3). Reverse this procedure to install the display assembly. 66Chapter 5 Removal and replacement procedures for authorized service provider parts
Page 75
WebcamDescriptionSpare part numberWebcam GNRC webcam 1p NM U3 1080p Intel 3D781624-005GNRC webcam1p DM U2 Mjpeg 720p VDH2 PA833962-011GNRC webcam 1p DM U2 Mjpeg 720p VDH SF846006-003IMPORTANT:Make special note of each screw and screw lock size and location during removal and replacement. Before removing the webcam, follow these steps: 1.Shut down the computer. 2.Disconnect all external devices connected to the computer. 3.Disconnect the power from the computer by
Page 76
Reverse this procedure to install the webcam. 68Chapter 5 Removal and replacement procedures for authorized service provider parts
Page 78
3.Enter the product name or number. – or – Select Identify now to let HP automatically detect your product. 4.Select your computer, and then select your operating system. 5.In the Diagnostic section, follow the on-screen instructions to select and download the UEFI version you want. 70Chapter 6 Using HP PC Hardware Diagnostics (UEFI)
Page 79
7Backing up, restoring, and recovering This chapter provides information about the following processes. The information in the chapter is standard procedure for most products.
Page 80
You can use Windows tools to create system restore points and create backups of personal information, see Using Windows tools on page 72.