HP Pavilion 13 S100 X360 Convertible Pc User Manual

3.Insert the security cable lock into the security cable slot on the computer (3), and then lock the security
cable lock with the key.
4.Remove the key and keep it in a safe place.
Using an optional security cable 43 

9 Using Setup Utility (BIOS)
Setup Utility, or Basic Input/Output System (BIOS), controls communication between all the input and output
devices on the system (such as disk drives, display, keyboard, mouse, and printer). Setup Utility (BIOS)
includes settings for the types of devices installed, the startup sequence of the computer, and the amount of
system and extended memory.
NOTE:To start Setup Utility on convertible computers, your computer must be in notebook mode and you
must use the keyboard...

Click the question mark icon in the taskbar.
2.Select My PC, and then select Specifications.
– or –
▲
Use Setup Utility (BIOS).
To use Setup Utility (BIOS):
1.Start Setup Utility (BIOS) (see 
Starting Setup Utility (BIOS) on page 44).
2.Select Main, select System Information, and then make note of the BIOS version.
3.Select Exit, select No, and then follow the on-screen instructions.
To check for later BIOS versions, see 
Downloading a BIOS update on page 45.
Downloading a BIOS update
CAUTION:To reduce...

4.Double-click the file that has an .exe extension (for example, filename.exe).
The BIOS installation begins.
5.Complete the installation by following the on-screen instructions.
NOTE:After a message on the screen reports a successful installation, you can delete the downloaded file
from your hard drive.
Synchronizing a tablet and keyboard (select products only)
For a tablet with a detachable keyboard, when you attach the tablet to the keyboard and restart the
computer, Setup Utility (BIOS) checks to see...

10 Using HP PC Hardware Diagnostics (UEFI)
HP PC Hardware Diagnostics is a Unified Extensible Firmware Interface (UEFI) that allows you to run
diagnostic tests to determine whether the computer hardware is functioning properly. The tool runs outside
the operating system so that it can isolate hardware failures from issues that are caused by the operating
system or other software components.
NOTE:To start BIOS on a convertible computer, your computer must be in notebook mode and you must
use the keyboard...

Download any version of UEFI for a specific product:
1.Go to 
http://www.hp.com/support, and then select your country. The HP Support page is displayed.
2.Click Drivers & Downloads.
3.In the text box, enter the product name, and then click Go.
– or –
Click Find Now to let HP automatically detect your product.
4.Select your computer, and then select your operating system.
5.In the Diagnostic section,  follow the on-screen instructions to select and download the UEFI version
you want.
48 Chapter 10   Using...

11 Backing up, restoring, and recovering
This chapter provides information about the following processes. The information in the chapter is standard
procedure for most products.
●
Creating recovery media and backups
●
Restoring and recovering your system
For additional information, refer to the HP support assistant app.
▲
Type support in the taskbar search box, and then select the HP Support Assistant app.
‒ or –
Click the question mark icon in the taskbar.
IMPORTANT:If you will be performing recovery...

You can use Windows tools to create system restore points and create backups of personal information,
see 
Using Windows tools on page 50.
●
If your computer does list the Recovery partition and the Windows partition, you can use HP Recovery
Manager to create recovery media after you successfully set up the computer. HP Recovery media can
be used to perform system recovery if the hard drive becomes corrupted. System recovery reinstalls the
original operating system and software programs that were...

Restore and recovery
There are several options for recovering your system. Choose the method that best matches your situation
and level of expertise:
IMPORTANT:Not all methods are available on all products.
●
Windows offers several options for restoring from backup, refreshing the computer, and resetting the
computer to its original state. For more information see the Get started app.
▲
Select the Start button, and then select the Get started app.
●
If you need to correct a problem with a preinstalled...

website. Go to http://www.hp.com/support, select your country or region, and follow the on-screen
instructions.
IMPORTANT:HP Recovery Manager does not automatically provide backups of your personal data. Before
beginning recovery, back up any personal data you want to retain.
Using HP Recovery media, you can choose from one of the following recovery options:
NOTE:Only the options available for your computer display when you start the recovery process.
●
System Recovery—Reinstalls the original operating...