HP Pavilion 13 A100 X360 Convertible Pc User Manual

							Component Description
●Amber (left): Activity is occurring on the
network.
(5)
HDMI port Connects an optional video or audio device, such as
a high-definition television, any compatible digital or
audio component, or a high-speed HDMI device.
(6)
USB 3.0 ports (2) Each USB 3.0 port connects an optional USB
device, such as a keyboard, mouse, external drive,
printer, scanner or USB hub.
(7)
Memory card reader Reads optional memory cards that store, manage,
share, or access information.
To insert a card:
Hold the card label-side up, with connectors facing
the slot, insert the card into the slot, and then push
in on the card until it is firmly seated.
To remove a card:
Press in on the card it until it pops out.
(8)  Speakers (2) Produce sound.
(9)
Volume button Controls speaker volume.
●To increase speaker volume, press the + edge
of the button.
●To decrease speaker volume, press the – edge
of the button.
(10)
Audio-out (headphone)/Audio-in
(microphone) jackConnects optional powered stereo speakers,
headphones, earbuds, a headset, or a television
audio cable. Also connects an optional headset
microphone. This jack does not support optional
microphone-only devices.
WARNING!To reduce the risk of personal injury,
adjust the volume before putting on headphones,
earbuds, or a headset. For additional safety
information, refer to the 
Regulatory, Safety, and
Environmental Notices
. To access this guide, from
the Start screen, type support, and then select the
HP Support Assistant app.
NOTE:When a device is connected to the jack,
the computer speakers are disabled.
NOTE:Be sure that the device cable has a 4-
conductor connector that supports both audio-out
(headphone) and audio-in (microphone).
(11)
USB 2.0 port Connects an optional USB device, such as a
keyboard, mouse, external drive, printer, scanner or
USB hub.
Multimedia features 23 
						

							Using the webcam
The computer has an integrated webcam that records video and captures photographs. Some models
may allow you to video conference and chat online using streaming video.
▲To start the webcam, from the Start screen, type camera, and then select Camera from the list
of applications.
For details about using the webcam, go to Help and Support. From the Start screen, type help, and
then select Help and Support.
Using audio
On your computer, you can play music CDs, download and listen to music, stream audio content from
the web (including radio), record audio, or mix audio and video to create multimedia. To enhance your
listening enjoyment, attach external audio devices such as speakers or headphones.
Connecting speakers
You can attach wired speakers to your computer by connecting them to a USB port or to the audio-
out (headphone) jack on your computer.
To connect wireless speakers to your computer, follow the device manufacturer's instructions. To
connect high-definition speakers to the computer, see 
Setting up HDMI audio on page 26. Before
connecting speakers, lower the volume setting.
Connecting headphones and microphones
You can connect wired headphones or headsets to the audio-out (headphone)/audio-in (microphone)
jack on your computer. Many headsets with integrated microphones are commercially available.
To connect 
wireless headphones or headsets to your computer, follow the device manufacturer's
instructions.
WARNING!To reduce the risk of personal injury, lower the volume setting before putting on
headphones, earbuds, or a headset. For additional safety information, see the 
Regulatory, Safety and
Environmental Notices
. To access this guide, from the Start screen, type support, and then select
the HP Support Assistant app.
Using Beats Audio
Beats Audio is an enhanced audio feature that provides a deep, controlled bass while maintaining a
clear sound. You can experience Beats Audio through the computer's internal speakers, through
external speakers connected to a USB port, or through Beats Audio headphones connected to the
headphone jack.
Accessing Beats Audio Control Panel
Use Beats Audio Control Panel to view and manually control audio and bass settings.
▲From Start screen, type c, select Control Panel, select Hardware and Sound, and then select
Beats Audio Control Panel.
Enabling and disabling Beats Audio
▲To enable or disable Beats Audio, press the fn key in combination with the b key.
24 Chapter 4   Enjoying entertainment features 
						

							Testing your audio features
To check the audio functions on your computer, follow these steps:
1.From the Start screen, type control panel, and then select Control Panel.
2.Select Hardware and Sound, and then select Sound.
3.When the Sound window opens, select the Sounds tab. Under Program Events, select any
sound event, such as a beep or alarm, and then click Test.
You should hear sound through the speakers or through connected headphones.
To check the recording functions on your computer, follow these steps:
1.From the Start screen, type sound, and then select Sound Recorder.
2.Click Start Recording and speak into the microphone.
3.Save the file to your desktop.
4.Open a multimedia program and play the recording.
To confirm or change the audio settings on your computer, follow these steps:
1.From the Start screen, type control panel, and then select Control Panel.
2.Select Hardware and Sound, and then select Sound.
Using video
Your computer is a powerful video device that enables you to watch streaming video from your
favorite websites and download video and movies to watch on your computer when you are not
connected to a network.
To enhance your viewing enjoyment, use one of the video ports on the computer to connect an
external monitor, projector, or TV. Your computer has a high-definition multimedia interface (HDMI)
port, which allows you to connect a high-definition monitor or TV.
IMPORTANT:Be sure that the external device is connected to the correct port on the computer,
using the correct cable. Check the device manufacturer's instructions.
Connecting video devices by using an HDMI cable
NOTE:To connect an HDMI device to your computer, you need an HDMI cable, sold separately.
To see the computer screen image on a high-definition TV or monitor, connect the high-definition
device according to the following instructions.
1.Connect one end of the HDMI cable to the HDMI port on the computer.
Using video 25 
						

							2.Connect the other end of the cable to the high-definition TV or monitor.
3.Press f4 to alternate the computer screen image between 4 display states:
●PC screen only: View the screen image on the computer only.
●Duplicate: View the screen image simultaneously on both the computer and the external
device.
●Extend: View the screen image extended across both the computer and the external
device.
●Second screen only: View the screen image on the external device only.
Each time you press f4, the display state changes.
NOTE:For best results, especially if you choose the “Extend” option, adjust the screen
resolution of the external device, as follows. From the Start screen, type control panel, and
then select Control Panel. Select Appearance and Personalization. Under Display, select Adjust
screen resolution.
Setting up HDMI audio
HDMI is the only video interface that supports high-definition video and audio. After you connect an
HDMI TV to the computer, you can then turn on HDMI audio by following these steps:
1.From the Windows desktop, right-click the Speakers icon in the notification area, at the far right
of the taskbar, and then select Playback devices.
2.On the Playback tab, select the name of the digital output device.
3.Click Set Default, and then click OK.
To return the audio stream to the computer speakers:
1.From the Windows desktop, right-click the Speakers icon in the notification area, at the far right
of the taskbar, and then click Playback devices.
2.On the Playback tab, click Speakers.
3.Click Set Default, and then click OK.
26 Chapter 4   Enjoying entertainment features 
						

							Discovering and connecting to Miracast-compatible wireless displays
To discover and connect to Miracast-compatible wireless displays without leaving your current apps,
follow the steps below.
To open Miracast:
▲Swipe from the right edge of the Start screen, tap Devices, tap Project, and then follow the on-
screen instructions.
– or –
Point to the upper-right or lower-right corner of the Start screen to display the charms, click
Devices, click Project, and then follow the on-screen instructions.
Using video 27 
						

							5 Navigating the screen
You can navigate the computer screen in the following ways:
●Touch gestures
●Keyboard and mouse
Touch gestures can be used on your computer's TouchPad or on a touch screen.
NOTE:An external USB mouse (purchased separately) can be connected to one of the USB ports
on the computer.
Select computer models have special action keys or hot key functions on the keyboard to perform
routine tasks.
Using the TouchPad and gestures
The TouchPad allows you to navigate the computer screen and control the pointer by using simple
finger movements. You can customize the touch gestures by changing settings, button configurations,
click speed, and pointer options. You can also view demonstrations of TouchPad gestures.
From the Start screen, type control panel, select Control Panel, and then select Hardware and
Sound. Under Devices and Printers, select Mouse.
TIP:Use the left and right buttons on the TouchPad as you would use the corresponding buttons on
an external mouse.
NOTE:TouchPad gestures are not supported in all apps.
28 Chapter 5   Navigating the screen 
						

							Tapping
To make an on-screen selection, use the tap function on the TouchPad.
●Point to an item on the screen, and then tap one finger on the TouchPad zone to make a
selection. Double-tap an item to open it.
Using the TouchPad and gestures 29 
						

							Scrolling
Scrolling is useful for moving up, down, or sideways on a page or image.
●Place two fingers slightly apart on the TouchPad zone and then drag them up, down, left, or
right.
2-finger pinch zoom
2-finger pinch zoom allows you to zoom out or in on images or text.
●Zoom out by placing two fingers apart on the TouchPad zone and then moving your fingers
together.
●Zoom in by placing two fingers together on the TouchPad zone and then moving your fingers
apart.
30 Chapter 5   Navigating the screen 
						

							2-finger click
2-finger click allows you to make menu selections for an object on the screen.
NOTE:Using 2-finger click is the same action as using right-click with the mouse.
●Place two fingers on the TouchPad zone and press down to open the options menu for the
selected object.
Rotating
Rotating allows you to turn items such as photos.
●Point to an object, and then anchor the forefinger of your left hand in the TouchPad zone. Using
your right hand, slide your forefinger in a sweeping motion from 12 o’clock to 3 o’clock. To
reverse the rotation, move your forefinger from 3 o’clock to 12 o’clock.
NOTE:Rotate is intended for specific apps where you can manipulate an object or image. Rotate
may not be functional for all apps.
Edge swipes
Edge swipes allow you to perform tasks such as changing settings and finding or using apps.
Using the TouchPad and gestures 31 
						

							Right-edge swipe
The right-edge swipe reveals the charms, which let you search, share, start apps, access devices, or
change settings.
●Swipe your finger gently from the right edge to reveal the charms.
Left-edge swipe
The left-edge swipe accesses your recently opened apps so that you can switch between them
quickly.
●Swipe your finger gently from the left edge of the TouchPad.
32 Chapter 5   Navigating the screen