HP Pavilion 10 N200 X2 Detachable Pc User Manual

To check for later BIOS versions, see Downloading a BIOS update on page 41.
Downloading a BIOS update
CAUTION:To reduce the risk of damage to the computer or an unsuccessful installation, download
and install a BIOS update only when the computer is connected to reliable external power using the
AC adapter. Do not download or install a BIOS update while the computer is running on battery
power, docked in an optional docking device, or connected to an optional power source. During the
download and...

Synchronizing a tablet and keyboard (select models only)
For a tablet with a detachable keyboard, when you attach the tablet to the keyboard and restart the
computer, Setup Utility (BIOS) checks to see if the Embedded Controller firmware on the keyboard
needs to be synchronized. If so, synchronization begins. If the synchronization is interrupted, a
notification screen displays for 10 seconds before the tablet restarts and attempts to synchronize
again.
NOTE:The Embedded Controller firmware will...

11 Using HP PC Hardware Diagnostics
(UEFI)
HP PC Hardware Diagnostics is a Unified Extensible Firmware Interface (UEFI) that allows you to run
diagnostic tests to determine whether the computer hardware is functioning properly. The tool runs
outside the operating system so that it can isolate hardware failures from issues that are caused by
the operating system or other software components.
NOTE:To start Setup Utility, your computer must be in notebook mode and you must use the
keyboard attached to your...

12 Backing up, restoring, and recovering
This chapter provides information about the following processes. The information in the chapter is
standard procedure for most models.
●Creating recovery media and backups
●Restoring and recovering your system
For additional information, refer to Help and Support.
▲From the Start screen, type help, and then select Help and Support.
IMPORTANT:If you will be using F11 startup recovery or USB media recovery to recover your
system, the tablet battery must be at least...

●To create recovery discs, your computer must have an optical drive with DVD writer capability,
and you must use only high-quality blank DVD-R, DVD+R, DVD-R DL, or DVD+R DL discs. Do
not use rewritable discs such as CD±RW, DVD±RW, double-layer DVD±RW, or BD-RE
(rewritable Blu-ray) discs; they are not compatible with HP Recovery Manager software. Or,
instead, you can use a high-quality blank USB flash drive. 
●If your computer does not include an integrated optical drive with DVD writer capability, but...

▲From the Start screen, type help, and then select Help and Support.
●On select models, if you need to correct a problem with a preinstalled application or driver, use
the Reinstall drivers and/or applications option of HP Recovery Manager to reinstall the
individual application or driver.
▲From the Start screen, type recovery, select HP Recovery Manager, select Reinstall
drivers and/or applications, and then follow the on-screen instructions.
●On select models, if you want to reset your computer using a...

from the HP website. Go to http://www.hp.com/support, select your country or region, and follow
the on-screen instructions.
IMPORTANT:HP Recovery Manager does not automatically provide backups of your personal
data. Before beginning recovery, back up any personal data you want to retain.
Using HP Recovery media, you can choose from one of the following recovery options:
NOTE:Only the options available for your computer display when you start the recovery process.
●System Recovery—Reinstalls the original...

Changing the computer boot order
If your computer does not restart in HP Recovery Manager, you can change the computer boot order,
which is the order of devices listed in BIOS where the computer looks for startup information. You can
change the selection to an optical drive or a USB flash drive.
To change the boot order:
IMPORTANT:For a tablet with a detachable keyboard, connect the tablet to the keyboard base
before beginning these steps.
1.Insert the HP Recovery media.
2.Start Computer Setup:
For...

13 Specifications
Input power 
The power information in this section may be helpful if you plan to travel internationally with the
computer.
The computer operates on DC power, which can be supplied by an AC or a DC power source. The
AC power source must be rated at 100–240 V, 50–60 Hz. Although the computer can be powered
from a standalone DC power source, it should be powered only with an AC adapter or a DC power
source that is supplied and approved by HP for use with this computer.
The computer can...