HP Mp2210 Digital Projector Users Guide

Turning the projector on and off 21
Turning the projector on and off
Removing the lens cover
•Pull the lens cover off the lens. 

Setting Up 22
Turning the projector on
1.Be sure the power cord is connected and the lens cover is removed.
2.Press the power button on the projector or on the remote control. 
The projector takes a minute or so to warm up. The power button blinks during warm-up.
TIP:If the picture does not appear on the screen, try the following:
•If you are using a computer, press the key combination that turns on its video output. For 
example, press F
N+F4 or FN+F5 on some computers.
•On the projector, press the...

Turning the projector on and off 23
Turning the projector off
1.Press the power button on the projector or remote control to turn off the projector. Do not 
hold the button down.
The power button blinks during the cool-down period, then the projector turns off. Even 
though the projector is off, it uses a small amount of power internally.
2.If you want, disconnect video and audio equipment from the projector during the cool-
down period or after the power button stops blinking.
CAUTION:Do not disconnect...

Setting Up 24
Making basic adjustments
This section provides instructions for making basic adjustments to the projector.
Aiming the projector
•To raise or lower the projected picture on the screen, push in the height adjustment button 
1 and raise or lower the front of the projector 2. Release the button to lock the adjustment.
•To level the picture on the screen, turn the adjustable foot 
3 to lengthen or shorten the foot. 

Making basic adjustments 25
Adjusting the focus and zoom
1.Rotate the zoom ring to adjust the picture size from 100 to 115%.
2.Rotate the focus ring until the image becomes clear. The projector can be focused at 
distances of 1.5 to 10 m (5 to 33 ft).
If the picture does not fit the screen, you might have to move the projector closer to or farther 
away from the screen. 

Setting Up 26
Using the remote control
To do this... Press this...
Hide or unhide the picturehide button 
1.
Move mouse pointer on computer Mouse pad 
2 at the edge in the direction you 
want the pointer to move. This feature requires a 
USB connection between the projector and 
computer.
Turn the projector on or off Power button 
3.
Click mouse button on computer Left-click or right-click button 
4. This feature 
requires a USB connection between the projector 
and computer.
Page up or page down on...

Using the remote control 27
TIP:From within the distance of 9 m (30 ft), aim the remote control at the screen or at the 
front or back of the projector.
Change picture settings for different type of input 
signalPicture mode button 7 one or more times.
Change settings using on-screen menuenter and navigation buttons 
8. See “Using the 
on-screen menu” on page 36.
Exit from any on-screen menu or adjustment Exit   button 
8.
Switch to next input sourcesource button 
9 one or more times. To do this... Press...

Setting Up 28 

Showing a computer screen 29
2Showing Presentations
Showing a computer screen
1.Be sure the computer is connected to the projector and turned on. See “Connecting a 
computer” on page 16.
2.Be sure the projector is set up, turned on, and adjusted. See “Making basic adjustments” 
on page 24.
3.If a different input source is shown on the projector, press the source button on the projector 
or remote control one or more times to select the VGA port.
4.If the computer display is not shown on the projector,...

Showing Presentations 30