HP Lp3065 User Guide

							HP LP3065 30 LCD Monitor
User Guide
 
						

							© 2006 Hewlett-Packard Development
Company, L.P.
Microsoft, Windows, and the Windows logo
are trademarks of Microsoft Corporation in
the U.S. and other countries.
All other product names mentioned herein
may be trademarks of their respective
companies.
Hewlett-Packard Company shall not be liable
for technical or editorial errors or omissions
contained herein or for incidental or
consequential damages in connection with
the furnishing, performance, or use of this
material. The information in this document is
provided “as is” without warranty of any kind,
including, but not limited to, the implied
warranties of merchantability and fitness for
a particular purpose, and is subject to
change without notice. The warranties for
Hewlett-Packard products are set forth in the
express limited warranty statements
accompanying such products. Nothing
herein should be construed as constituting
an additional warranty.
This document contains proprietary
information that is protected by copyright. No
part of this document may be photocopied,
reproduced, or translated to another
language without the prior written consent of
Hewlett-Packard Company.
Second Edition (October 2006)
Document Part Number: 418196–002
 
						

							
About This Guide
This guide provides information on setting up the monitor, installing drivers, using the on-screen display
menu, troubleshooting and technical specifications.
WARNING! Text set off in this manner indicates that  failure to follow directions could result in
bodily harm or loss of life.
CAUTION Text set off in this manner indicates that  failure to follow directions could result in
damage to equipment or loss of information.
NOTE Text set off in this manner provides important supplemental information.
ENWW iii
 
						

							
iv   About This GuideENWW
 
						

							
Table of contents
1  Product FeaturesHP LP3065 ..................................................................................................................... ...................... 1
2  Safety and Maintenance Guidelines Important Safety Information .................................................................................................. .............. 2
Maintenance Guidelines ........................................................................................................ ............... 3
Cleaning the Monitor .......................................................................................................... .. 3
Shipping the Monitor .......................................................................................................... .. 3
3  Setting Up the Monitor Installing the Monitor Pedestal Base .......................................................................................... .......... 4
Rear Components ............................................................................................................... ................. 5
Selecting the Signal Connectors and Cables .................................................................................... ... 6
Connecting the Monitor ........................................................................................................ ................ 7
Adjusting the Monitor ......................................................................................................... ................... 9
Turning on the Monitor ........................................................................................................ ............... 11
Connecting USB Devices ........................................................................................................ ........... 11
Using the Accessory Rails ..................................................................................................... ............. 11
Removing the Monitor Pedestal Base ............................................................................................ .... 12
Mounting the Monitor .........................................................................................................  13
Locating the Rating Labels .................................... ............................................................................. 15
4  Operating the Monitor Software and Utilities ........................................................................................................ .................. 16
The Information File .......................................................................................................... . 16
The Image Color Matching File .......................................................................................... 16
Installing the .INF and .ICM Files ............................................................................................ ........... 16
Installing from the CD ........................................................................................................  17
Downloading from the Worldwide Web .............................................................................. 17
Front Panel Controls .......................................................................................................... ................  17
HP Display LiteSaver .......................................................................................................... ...............  18
Installing the HP Display LiteSaver Software ....................................................................  18
Appendix A  Troubleshooting Solving Common Problems ....................................................................................................... ......... 20
Using the Worldwide Web ....................................................................................................... ........... 21
Preparing to Call Techni cal Support ........................................................................................... ........ 21
ENWW v
 
						

							
Appendix B  Technical Specifications
LP3065 Model .................................................................................................................. .................. 22
Energy Saver Feature .......................................................................................................... .............. 23
Appendix C  Agency Regulatory Notices Federal Communications Commission Notice ................................................................................... 24Modifications ................................................................................................................. ..... 24
Cables ........................................................................................................................ ........ 24
Declaration of Conformity for Products Marked with the FCC Logo (United States Only) ................. 24
Canadian Notice ............................................................................................................... .................. 25
Avis Canadien ................................................................................................................. ................... 25
European Union Regulatory Notice .............................................................................................. ...... 25
Japanese Notice ............................................................................................................... .................. 26
Korean Notice ................................................................................................................. .................... 26
Power Cord Set Requirements ................................................................................................... ........ 26
Japanese Power Cord Requirements ................................................................................ 26
Product Environmental Notices ................................................................................................. ......... 27
Materials Disposal ............................................................................................................ . 27
Disposal of Waste Equipment by Users  in Private Household in the European
Union ......................................................................................................................... ........ 27
Restriction of Hazardous Substances (RoHs) ................................................................... 27
vi ENWW
 
						

							
1 Product Features
HP LP3065
The flat panel monitor has an active matrix, thin-film transistor (TFT), liquid crystal display (LCD). The
monitor features include:
● 30–inch (76.2 cm) viewable area display with 2560 x 1600 resolution
● Wide viewing angle to allow viewing from a sittin
g or standing position, or moving side-to-side
● Tilt, swivel, and height 
adjustment capabilities
● Removable stand with quick release mechani
sm and VESA 100mm mounting holes for flexible
mounting solutions
● Three DVI-D inputs
● Two DVI-D video cables
● USB 2.0 hub with one upstream (connects to 
the computer) and four downstream (connects to
USB devices) ports
● USB cable included to connect the monitors USB hub to the USB connector on the computer
● Accessory rail on monitor to accept optional mounted devices, such as an HP speaker bar
● Plug and play capability if
 supported by your system
● Software and documentation CD that includes mo
nitor driver software and product documentation
● Energy saver feature to meet requir
ements for reduced power consumption
● Compliant with the following
 regulated specifications:
● European Union CE Directives
● Swedish MPR II 1990
● Swedish TCO Requirements
ENWW HP LP3065 1
 
						

							
2 Safety and Maintenance Guidelines
Important Safety Information
A power cord is included with the monitor. If another cord is used, use only a power source and
connection appropriate for this monitor. For informat ion on the correct power cord set to use with the
monitor, refer to the 
Power Cord Se t Requirements section in Appendix C.
WARNING!To reduce the risk of electric  shock or damage to the equipment:
• Do not disable the power cord grounding feature. The grounding plug is an important safety
feature.
• Plug the power cord in a grounded (earth) ou tlet that is easily accessible at all times.
• Disconnect power from the product by unplugging  the power cord from the electrical outlet.
For your safety, do not place anything on power  cords or cables. Arrange them so that no one
may accidentally step on or trip over them. Do not pull on a cord or cable. When unplugging from
the electrical outlet, grasp the cord by the plug.
To reduce the risk of serious injury, read the  Safety and Comfort Guide. It describes proper
workstation, setup, posture,  and health and work habits for computer users, and provides
important electrical and mechanical safety info rmation. This guide is located on the Web at
http://www.hp.com/ergo and/or on the documentation CD, if one is included with the monitor.
CAUTION  For the protection of the monitor, as well as the computer, connect all power cords
for the computer and its peripheral devices (such as  a monitor, printer, scanner) to some form of
surge protection device such as a power stri p or Uninterruptible Power Supply (UPS). Not all
power strips provide surge protecti on; the power strips must be specifically labeled as having this
ability. Use a power strip whose  manufacturer offers a Damage Replacement Policy so you can
replace the equipment, if surge protection fails.
2 Chapter 2   Safety and Maintenance GuidelinesENWW
 
						

							
Maintenance Guidelines
To enhance the performance and extend the life of your monitor:
● Do not open your monitor cabinet or attempt to 
service this product yourself. Adjust only those
controls that are covered in the operating instruct ions. If your monitor is not operating properly or
has been dropped or damaged, contact your HP au thorized dealer, reseller, or service provider.
● Use only a power source and connection appropriate for this monitor, as indicated on the label/
back plate of the monitor.
● Be sure the total ampere rating of the products connected to the outlet does not exceed the current
rating of the electrical outlet, and the total ampere 
rating of the products connected to the cord does
not exceed the rating of the cord. Look on the power label to determine the ampere rating (AMPS
or A) for each device.
● Install your monitor near an outlet that you can 
easily reach. Disconnect the monitor by grasping
the plug firmly and pullin g it from the outlet. Never disconne ct the monitor by pulling the cord.
● Turn your monitor off when not in use. You can 
substantially increase the life expectancy of your
monitor by using a screen saver program and  turning off the monitor when not in use.
● Slots and openings in the cabinet are provided for ventilation. These openings must not be blocked
or covered. Never push objects of any ki
nd into cabinet slots or other openings.
● Do not drop your monitor or place it on an unstable surface.
● Do not allow anything to rest on the 
power cord. Do not walk on the cord.
● Keep your monitor in a well-ventilated area, 
away from excessive light, heat or moisture.
● When removing the monitor base, yo
u must lay the monitor face down on a soft area to prevent it
from getting scratched, defaced, or broken.
Cleaning the Monitor
1. Turn off the monitor and the computer.
2. Unplug the monitor from the wall outlet.
3. Clean the monitor plastics with a clean cloth dampened with water.
4. Clean the monitor screen with an antistatic screen cleaner.
CAUTION Do not use benzene, thinner, ammonia, or  any other volatile substances to clean
your monitor or the screen. These chemicals may damage the cabinet finish as well as the screen.
Shipping the Monitor
Keep the original packing box in a storage area. You ma y need it later if you move or ship your monitor.
ENWW Maintenance Guidelines 3
 
						

							
3 Setting Up the Monitor
To set up the monitor, ensure that the power is turned off to the monitor, computer system, and other
attached devices, then follow the instructions below.
NOTE Be sure the master power switch, located on th e rear panel of the monitor, is in the off
position. The master power switch turns off all power to the monitor.
Installing the Monitor Pedestal Base
NOTE Do not install the pedestal if the monitor will  be used on a wall, swing arm, or other
mounting fixture; instead see the section on 
Mounting the Monitor  in this chapter.
1.Using both hands, position the monitor over the pedestal base.
CAUTION Do not touch the surface of the LCD pa nel. Pressure on the panel may cause
non-uniformity of color or disorientation of  the liquid crystals. If this occurs the screen will
not recover to its normal condition.
2. Press down firmly on the monitor to lock the pedestal base in place. When the base locks, it will
make a clicking sound.
Figure 3-1   Inserting the Monitor into the Pedestal Base
4 Chapter 3   Setting Up the MonitorENWW