HP LaserJet Enterprise M4555 User Manual

Table 2-2  Reports  menu (continued)
First level Second level Values
Other Pages PCL Font List Print
  PS Font ListPrint
General Settings menu
To display: At the product control panel, select the  Administration menu, and then select the  General
Settings  menu.
In the following table, asterisks (*)  indicate the factory default setting.
Table 2-3  General Settings  menu
First level Second level Third levelFourth level Values
Date/Time Settings Date/Time Format Date Format  DD/MMM/YYYY
MMM/DD/YYYY...

Table 2-3  General Settings  menu (continued)
First level Second level Third levelFourth level Values
  Sleep Delay    Enter a value between 1
and 120 minutes.
The default value is 45
minutes.
Print Quality Image Registration Adjust Tray  Print Test Page 
     X1 Shift
Y1 Shift
X2 Shift
Y2 ShiftRange: -5.00 mm to
5.00 mm
  Adjust Paper Types Select from a list of paper
types that the product
supports. The available
options are the same for
each paper type.Print Mode
Select from a list of print
modes....

Table 2-3  General Settings  menu (continued)
First level Second level Third levelFourth level Values
  Toner Density    Range of 1 to 5.
The default value is 3.
Quiet Mode     Off*
On
Automatic Transition
Jam Recovery     Auto*
Off
On
Manage Stored Jobs Quick Copy Job Storage Limit   1-300
Default = 32
  Quick Copy Job Held
Timeout   
Off*
1 Hour
4 Hours
1 Day
1 Week
  Default Folder Name for
Stored Jobs    
  Sort Stored Jobs By    Job Name*
Date
Hold Off Print Job     Enabled*
Disabled
Restore Factory...

Copy Settings menu
To display: At the product control panel, select the  Administration menu, and then select the  Copy
Settings  menu.
In the following table, asterisks (*)  indicate the factory default setting.
Table 2-4  Copy Settings  menu
First level Second level Values
Copies  Range: 1 – 9999
Default = 1
Image Preview
NOTE: You might need to upgrade the
firmware to view this menu.  
Make optional*
Require preview
Disable preview
Sides  1-sided original, 1-sided output*
1-sided original, 2-sided...

Table 2-4  Copy Settings  menu (continued)
First level Second level Values
Reduce/Enlarge Scaling Automatic
Range X-Y (25-400%)
100%
75%
50%
125%
150%
200%
  Auto Include Margins 
Paper Selection  Manually Feed
Automatically detect
Tray 1: [Size], [Type]
Tray : [Size], [Type]
Image Adjustment Darkness  
  Contrast 
  Background Cleanup 
  Sharpness 
Content Orientation Orientation Portrait*
Landscape
  2-Sided FormatBook-style
Flip-style
Book-style original; Flip-style copy
Flip-style original;...

Table 2-4  Copy Settings  menu (continued)
First level Second level Values
  Page OrderRight, then down
Down, then right
  Add Page Borders 
Original Size Automatically detect* Select from a list of sizes that the product
supports.
Edge-To-Edge  Normal (recommended)*
Edge-To-Edge output
Job Build  Job Build off*
Job Build on
26 Chapter 2   Control panel menus ENWW
 

Scan/Digital Send Settings menu
To display: At the product control panel, select the  Administration menu, and then select the  Scan/
Digital Send Settings  menu.
In the following table, asterisks (*)  indicate the factory default setting.
Table 2-5  Scan/Digital Send Settings  menu
First levelSecond levelThird levelFourth level Values
E-mail Settings
Default Save to Network
Folder Options
Default Save to USB
Options
NOTE: The same
options are available for
each of these features,
except where noted....

Table 2-5  Scan/Digital Send Settings  menu (continued)
First levelSecond levelThird levelFourth level Values
   Resolution 600 dpi
400 dpi
300 dpi
200 dpi
150 dpi*
75 dpi
   Content Orientation OrientationPortrait*
Landscape
    2-Sided FormatBook-style*
Flip-style
   Color/Black Automatically detect
Color
Black/Gray
Black
   Original Size Choose from a list of
paper sizes.
   Notification Do not notify*
Notify when job
completes
Notify only if job fails
Print
E-mail
   Image Adjustment Darkness...

Table 2-5  Scan/Digital Send Settings  menu (continued)
First levelSecond levelThird levelFourth level Values
Digital Send Service
Setup Allow Usage of Digital
Sending Software (DSS)
Server  Select 
or clear  the check
box. The default setting is
with the check box
cleared.
  Allow Transfer to New
Digital Sending Software
(DSS) Server  Select 
or clear  the check
box. The default setting is
with the check box
cleared.
Fax Settings menu
To display : At the product control panel, select the  Administration...

Table 2-6  Fax Settings  menu (continued)
First level Second levelThird levelFourth level Values
   General Fax Send
SettingsPC Fax Send
Enabled*
Disabled
    Fax HeaderPrepend*
Overlay
    Error Correction Mode Enabled*
Disabled
    Fax Number Confirmation Enabled
Disabled*
    JBIG Compression Enabled*
Disabled
   Billing CodesEnable Billing Codes Off *
On
    Minimum LengthRange: 1 – 16
Default = 1
    Default Billing Code 
    Allow users to edit billing
codes 
  Default Job Options Image Preview...