HP LaserJet 9050mfp User Manual

ENWWConfigure device menu169
DEFAULT PAPER 
TYPEPLAIN
PREPRINTED
LETTERHEAD
TRANSPARENCY
PREPUNCHED
LABELS
BOND
RECYCLED
COLOR
CARDSTOCK>163
ROUGH 90-105 G/M2
ENVELOPE
 * Allows the user to specify the type of media in each tray. 
Substitute the tray number for 
.
* ENVELOPE  appears for Tray 1 only.
DEFAULT CUSTOM 
PAPER SIZE UNIT OF MEASURE
X DIMENSION
Y DIMENSION Allows the user to set a custom paper size for any of the 
installed trays. Substitute the tray number for 
. This 
menu only appears when...

170Appendix B Control-panel menus ENWW
PCL submenu
COURIER 
FONT=REGULAR REGULAR
DARK Select the version of Courier font to use:
REGULAR
: The internal Courier font available on the 
HP LaserJet 4 Series printers.
DARK : The internal Courier font available on the 
HP LaserJet III Series printers.
Both fonts are not available at the same time.
WIDE A4=NO YES NO The Wide A4 setting changes the number of characters 
that can be printed on a single line of A4 paper.
YES
: Up to 80 10-pitch characters can be...

ENWWConfigure device menu171
Print quality submenu
Some items in this menu are accessible from a software application, or from the driver (if the 
appropriate driver is installed). Driver and software settings override control-panel settings. For 
more information, see Using features in the printer driver .
APPEND CR TO 
LF=NOYES
NOSelect 
YES to append a carriage return to each line feed 
encountered in backward-compatible PCL jobs (pure text, 
no job control). Some environments, such as UNIX, 
indicate...

172Appendix B Control-panel menus ENWW
RESOLUTION=
FASTRES  1200      300
600
FASTRES 1200 Select the resolution from the following values:
300
: Produces draft print quality at maximum printer speed. 
300 dpi (dots per inch) is recommended for some bitmapped fonts 
and graphics, and for compatibility with the HP LaserJet III family 
of printers.
600 : Produces high print quality at maximum product speed.
FASTRES 1200 : Produces optimum print quality (comparable to 
1200 dpi) at maximum product speed....

ENWWConfigure device menu173
System setup submenu
Items in this menu affect the printer function. Configure the printer according to your printing 
needs.
 
Item Values Explanation
DATE/TIME DATE
DATE FORMAT
TIME
TIME FORMATSets the date and time for the printer. The Real Time Clock is 
set to Greenwich Mean Time (GMT).
JOB STORAGE 
LIMIT=32  1
 to  100 Specifies the number of jobs  that can be stored on the printer 
hard disk accessory.
JOB HELD 
TIMEOUT=
OFF   OFF
1 HOUR
4 HOURS
1 DAY
1 WEEKSets the...

174Appendix B Control-panel menus ENWW
PERSONALITY=AUTO AUTO
PCL
PS
PDF
XHTML
MIMESelect the default printer language (personality). Possible 
values are determined by which valid languages are installed 
in the printer.
Normally you should not change the printer language (the 
default is 
AUTO). If you change it to a specific printer 
language, the printer does not aut omatically switch from one 
language to another unless specific software commands are 
sent to the printer.
CLEARABLE 
WARNINGS=
JOB...

ENWWConfigure device menu175
I/O submenu
Items in the I/O (input/output) menu affect the communication between the printer and the 
computer.
I/O timeout submenu
Parallel input submenu
EIO X Jetdirect submenu 
The EIO (enhanced input/output) submenu appears only when an EIO device is installed in an 
EIO slot on the printer (such as an HP Jetdirect print server). The items in the menu depend on 
the particular accessory product installed. If the printer contains an HP Jetdirect print server EIO 
card,...

176Appendix B Control-panel menus ENWW
Embedded Jetdirect submenu
Item Options Values Explanation
TCP/IP ENABLE
HOST NAME
CONFIG 
METHOD
DHCP 
RELEASE
DHCP RENEW
MANUAL 
SETTINGSON
OFF
BOOTP
DHCP
AUTO IP
MANUAL
NO 
(default)
 
YES
IP ADDRESS  
SUBNET 
MASK  
SYSLOG 
SERVER
DEFAULT 
GATEWAY  
IDLE 
TIMEOUT Enable the TCP/IP protocol.
Disable the TCP/IP protocol.
An alphanumeric string, up to 32 characters, used 
to identify the device. This name is listed on the 
Jetdirect configuration page. The default...

ENWWConfigure device menu177
TCP/IPDEFAULT IP
PRIMARY 
DNS
SECONDARY 
DNS
PROXY 
SERVER
PROXY PORTAUTO IP
LEGACY
 
.
A link-local IP address 169.254.x.x will be set.
The address 192.0.0.192 will be set, consistent 
with older Jetdirect products.
Specify the IP address (n.n.n.n) of the Primary 
Domain Name System (DNS) Server.
Specify the IP address (n.n.n.n) of the Secondary 
Domain Name System (DNS) Server.
Specifies the proxy server to be used by embedded 
applications in your printer. A proxy server...

178Appendix B Control-panel menus ENWW
DIAGNOSTICS LOOPBACK 
TEST
PING TEST
PING 
RESULTSYES
NO
DEST IP
PACKET 
SIZE
TIMEOUT
COUNT
PRINT 
RESULTS
EXECUTE
PACKETS 
SENT
PACKETS 
RECEIVED
PERCENT 
LOST
RTT MIN
RTT MAX
RTT AVE
PING IN 
PROGRESS
REFRESHCAUTION
 This test will erase your TCP/IP 
configuration.
YES  the loopback test will be initiated.
NO  the loopback test will not be initiated.
Specify the IP address of the remote host. A valid 
IP address must be entered.
Specify the size of each packet, in...