HP LaserJet 4250n User Manual

Control panel messageDescriptionRecommended action
13.XX.YY JAM IN
A jam has occurred in the specified
location.Remove jammed media from the
specified location. See 
Clearing jams.
If the message persists after all jams
have been cleared, a sensor might be
stuck or broken. Contact an HP-
authorized service or support provider
(see 
HP customer care ).
20 INSUFFICIENT
MEMORY
For help press 
alternates with
20 INSUFFICIENT
MEMORY
To continue press 
The printer received more data than can
fit in its...

Control panel messageDescriptionRecommended action
22 USB I/O
BUFFER OVERFLOW
To continue press Too much data was sent to the USB port.Press  (SELECT button) to clear the
error message. (The job will not be
printed.)
40 EIO X BAD
TRANSMISSION
To continue press The connection has been broken
between the printer and the EIO card in
the specified slot [X].
Note: EIO 0 is reserved for the
HP Jetdirect embedded print server.Press  ( SELECT button) to clear the
error message and continue printing.
41.3...

Control panel messageDescriptionRecommended action
51.XY ERROR
For help press 
alternates with
51.XY ERROR
To continue
turn off then on
A temporary printing error occurred.1. Turn the printer power off and thenon.
2. If the message persists, contact an HP-authorized service or support
provider (see 
HP customer care).
52.XY ERROR
For help press 
alternates with
52.XY ERROR
To continue
turn off then on
A temporary printing error occurred.1. Turn the printer power off and then
on.
2. If the message...

Control panel messageDescriptionRecommended action
55.XX.YY DC
CONTROLLER ERROR
For help press 
alternates with
55.XX.YY DC
CONTROLLER ERROR
To continue
turn off then on
A temporary printing error occurred.1. Turn the printer power off and thenon.
2. If the message persists, contact an HP-authorized service or support
provider (see 
HP customer care).
56.XX ERROR
For help press 
alternates with
56.XX ERROR
To continue
turn off then on
A temporary printing error occurred as a
result of an incorrect input...

Control panel messageDescriptionRecommended action
59.XY ERROR
For help press 
alternates with
59.XY ERROR
To continue
turn off then on
A temporary printing error occurred.1. Turn the printer power off and thenon.
2. If the message persists, contact an HP-authorized service or support
provider (see 
HP customer care).
62 NO SYSTEM
To continue
turn off then onThis message indicates that no system
was found. The printer software system
is corrupt.1. Turn the printer power off and then
on.
2. If the message...

Control panel messageDescriptionRecommended action
66.XY.ZZ OUTPUT
DEVICE FAILUREAn error occurred in an external paper-
handling accessory.1. Turn the printer power off.
2. Check that the accessory is properlyseated on and connected to the
printer, without any gaps between
the printer and the accessory. If the
accessory uses cables, disconnect
and reconnect them.
3. Turn the printer power on.
4. If the error reappears, record the message, and contact HP Customer
Support. (See 
HP customer care.)
68.X...

Control panel messageDescriptionRecommended action
69.X ERROR
For help press 
alternates with
69.X ERROR
To continue
turn off then on
A printing error occurred.1. Turn the printer power off and thenon.
2. If the message persists, contact an HP-authorized service or support
provider (see 
HP customer care).
79.XXXX ERROR
To continue
turn off then onThe printer detected a critical hardware
error.1. Press  STOP to clear the print job
from the printer memory. Turn the
printer power off and then on.
2. Try...

Control panel messageDescriptionRecommended action
8X.YYYY
EIO ERRORThe EIO accessory card in slot [X] has
encountered a critical error.1. Turn the printer power off and thenon.
2. Turn the printer power off, reseat the EIO accessory in slot [X], and
then turn the printer power on.
3. Turn the printer power off, remove the EIO accessory from slot [X],
install it in a different EIO slot, and
then turn the printer power on.
4. Replace the EIO accessory in slot [X].
8X.YYYY EMBEDDED
JETDIRECT ERRORThe...

Control panel messageDescriptionRecommended action
CARD SLOT 
NOT FUNCTIONAL
For help press 
alternates with

The CompactFlash card in slot X is not
working correctly.1. Turn the printer power off.
2. Make sure the card is insertedcorrectly.
3. If the printer control panel message continues to appear, the card needs
to be replaced.
CARD SLOT X DEVICE
FAILURE
To clear press
alternates with

The CompactFlash card in slot X had a
critical failure and can no longer be used.Remove the card and replace it with...

Control panel messageDescriptionRecommended action
Checking paper pathThe printer is checking for possible jams
or paper that was not cleared from the
printer.No action necessary.
Checking printerThe printer is checking for possible jams
or paper that was not cleared from the
printer.No action necessary.
CHOSEN PERSONALITY
NOT AVAILABLE
To continue press 
alternates with
CHOSEN PERSONALITY
NOT AVAILABLE
For help press 
The printer received a request for a
personality (printer language) that does
not...