HP LaserJet 3050 User Manual

9.With both hands, grasp the side of the media  that is most visible (this includes the middle), and
carefully pull it free from the all-in-one.
10. Close the automatic two-sided path door.
ENWW Other: How do I? 263
 

Clear jams from the automatic document feeder (ADF)
Occasionally, media becomes jammed during a fax, copy, or scan job.
You are notified of a media jam by the Doc feeder jam Clear, Reload message that appears on the
all-in-one control-panel display.
● The ADF input tray is loaded incorrectly or is too full. See 
Loading documents to fax, copy, or
scan
 for more information.
● The media does not meet HP specifications, such as those for size or type. See 
Media
specifications
 for more information.
To...

4.Gently try to remove the page without tearing it. If  you feel resistance, go to the next step.
5.Open the ADF lid and gently loosen the media by using both hands.
6.When the media is free, gently pull it out in the direction shown.
7.Close the lid to the flatbed scanner.
8.Lower the green lever.
ENWW Other: How do I? 265
 

9.Reinstall the cleanout part by inserting it as shown. Push down on the two tabs until the part
snaps into place. Install the cleanout part correctly, because future jamming might occur if the
cleanout part is not replaced correctly.
10.Close the ADF lid.
Order new supplies
You can order supplies by using HP ToolboxFX. To order supplies, complete the following steps.
1.Open HP ToolboxFX, and then, in the  Other Links section, click  Order Supplies .
A new browser window appears.
2. Click  Continue .
The...

12 Managing the all-in-one andmaintenance
●Information pages
●
HP ToolboxFX
●
Macintosh Configure Device (Mac OS X V10.3 and Mac OS X V10.4)
●
Embedded Web server
●
Managing supplies
●
Cleaning the all-in-one
●
Changing the print cartridge
●
Changing the automatic document feeder (ADF) on the HP LaserJet 3390/3392 all-in-one
●
Changing the automatic document feeder (ADF) pickup roller and load arm assembly
(HP LaserJet 3052/3055/3390/3392 all-in-one)
ENWW 267
 

Information pages
Information pages reside within the all-in-one memory. These pages help to diagnose and solve
problems with the all-in-one.
NOTEIf the all-in-one language was not correctly  set during installation, you can set the
language manually so the information pages print in one of the supported languages. Change
the language by using HP ToolboxFX. See 
HP ToolboxFX .
Demo page
To print the Demo page, complete the following steps.
1.On the all-in-one control panel, press  Menu.
2. Use the  < or...

1.Product Information . This section contains basic information about the all-in-one, such as the
product name and the serial number.
2. Memory . This section lists memory-related information, such as the total memory that is
installed.
3. Paper Settings . This section lists information about the media type for each tray and about the
type settings for all the  media that the all-in-one supports.
4. Copy Settings . This section lists the all-in-one default copy settings.
5. Product Settings . This...

Supplies Status page (HP LaserJet 3390/3392 all-in-one)
The Supplies Status page lists the remaining life of the HP print cartridge. It also lists the estimated
pages remaining, the number of pages printed, and other supplies information. You can print a
Supplies Status page from the all-in-one or HP ToolboxFX . To print from the all-in-one, complete the
following steps.
1. On the control panel menu, press  Menu.
2. Use the  < or the  > button to select  Reports, and then press 
.
3. Use the  < or the  >...

Network configuration page
The network configuration page lists the all-in-one network settings.
You can print a network configuration page from the all-in-one control or HP ToolboxFX. To print
from the all-in-one, complete the following steps:
1.On the all-in-one control panel, press 
.
2. Use the  < or the  > button to select  Reports, and then press 
.
3. Use the  < or the  > button to select  Network config. , and then press 
.
Fax logs and reports
For information about fax logs and reports, see Fax...

HP ToolboxFX
HP ToolboxFX is a Web-based program that you can use to complete the following tasks:
●Check the all-in-one status.
● Configure the all-in-one settings.
● View troubleshooting information.
● View online documentation.
You can view HP ToolboxFX when the all-in-one is  directly connected to your computer or when it is
connected to the network. You must perform  a typical software installation to use HP ToolboxFX.
NOTEHP ToolboxFX is not supported for Windows  98 SE or Macintosh operating...