HP La1951g User Guide

IconMain MenuSubmenuDescription
Monitor StatusDisplays the operating status of the monitor each time
the monitor is powered on. Select the location to
display the status to:
●Top
●Middle
●Bottom
●Off
The factory default is Top.
DDC/CI SupportAllows the computer to control some OSD menu
features such as brightness, contrast and color
temperature. Set to:
●On
●Off
The factory default is On.
 Bezel Power LEDTurns off the power LED on the front panel of the
monitor. The factory default is On.
Sleep...

IconMain MenuSubmenuDescription
Factory ResetReturns all OSD menu settings and DDC/CI controls
to the factory default settings, except the Language.
Source Control Selects the video input signal. VGA is the factory
default.
  DVISelects DVI as the video input signal.
  VGASelects VGA as the video input signal.
 Default SourceSelects the default or primary video input signal when
the monitor is connected to two active and valid video
sources. The monitor will automatically determine the
video format. The...

Using the HP Display Assistant Utility
HP Display Assistant, included on the software and documentation CD, is a software utility that guides
you through the tuning process with easy to understand instructions and background patterns designed
for each monitor control. It provides:
●Accurate screen calibration through the use of step-by-step instruction Wizards to obtain the best
overall image quality.
●Software control of the monitor image and color settings to eliminate dependence on the monitor’s
front...

●OSD Lockout—The OSD can be enabled or disabled by pressing and holding the Menu button
on the front panel for 10 seconds. If the OSD is locked, the warning message OSD Lockout
displays for ten seconds.
◦If the OSD is locked, press and hold the Menu button for 10 seconds to unlock the OSD.
◦If the OSD is unlocked, press and hold the Menu button for 10 seconds to lock the OSD.
●Power Button Lockout—Indicates the power button is locked. If the power button is locked, the
warning message Power Button...

6.Press the - (Minus) or + (Plus) button to adjust the hour.
7.Press the Menu button again to enter the time for minutes.
8.Press the - (Minus) or + (Plus) button to adjust the minutes.
9.Press the Menu button to lock in the time chosen.
10.After setting the current time, the highlight automatically skips to Set Sleep Time hours. Repeat
steps 6 through 9 to set Sleep Time.
11.If you do not want to set Sleep Time, press the Menu button twice, then select Save and
Return to exit the menu.
12.After setting...

Select This OptionTo Do This
Activity ExtensionSets the time in minutes before the monitor turns off if there is any keyboard or mouse
activity after the Display Off time is reached. If the keyboard or mouse is used, then
HP Display LiteSaver waits until the set amount of time before turning the display
off again. Set to 0 to disable. If disabled, the monitor will turn off as soon as the
Display Off time is reached, regardless of keyboard or mouse activity.
Show 1 minute Display Off NoticeDisplays a...

3.Select the Color Management tab, then click the Add button to open the Add Profile
Association dialog box.
4.Select the sRGB Color Space Profile.icm file, then click the Add button
5.To activate a color profile for the monitor, you must set it as the Default Monitor Profile. Select
sRGB Color Space Profile, then click Set as Default button.
6.Click Apply or OK.
Installing the sRGB ICM File for Microsoft Windows Vista
1.Click Appearance and Personalization icon in the Control Panel.
2.Click...

A Troubleshooting
Solving Common Problems
The following table lists possible problems, the possible cause of each problem, and the recommended
solutions.
ProblemPossible CauseSolution
Screen is blank.Power cord is disconnected.Connect the power cord.
Power button on front panel of
the monitor is turned off.Press the front panel power button.
NOTE:If pressing the power button has no effect,
press and hold the power button for 10 seconds to
disable the power button lockout feature.
Video cable is...

ProblemPossible CauseSolution
HP Display LiteSaver doesnt turn off
the monitor screen.The Activity Extension time
has not elapsed.The default Activity Extension value is set to 10
minutes. The HP Display LiteSaver will wait to detect
no input or movement from the keyboard or mouse
for 10 consecutive minutes after the Display Off time
has passed, before the monitor enters into low-
power mode. For example, if the Display Off time is
set to 5 minutes from the current time and the Activity
Extension is set...

Online Technical Support
For the online access to technical support information, self-solve tools, online assistance, community
forums of IT experts, broad mutlivendor knowledge base, monitoring and diagnostic tools, go to
http://www.hp.com/support
Preparing to Call Technical Support
If you cannot solve a problem using the troubleshooting tips in this section, you may need to call technical
support. Have the following information available when you call:
●Monitor model number
●Monitor serial number...