HP L5006tm User Guide

3 Setting Up the Monitor
To set up the monitor, ensure that the power is turned off to the monitor, computer system, and other
attached devices, then follow the instructions below.
Identifying Rear Connectors
Figure 3-1  Rear Connectors
Connector Function
1AC PowerConnects the AC power cord to the monitor.
2USBConnects the touchscreen USB cable to the monitor.
3SerialConnects the touchscreen serial cable to the monitor (not
available on L5009tm model).
4 VGA Connects the VGA video cable to the monitor....

Connecting the Cables
NOTE:For the L5009tm model, it is best to install the APR driver before connecting the hardware.
1.Place the monitor in a convenient, well-ventilated location near the computer.
2.Connect one end of the power cable (1) to the AC power connector on the back of the monitor,
and the other end to an electrical wall outlet.
3.L5006tm: Connect one end of the touchscreen serial cable (RS232) or USB cable (2), but not both,
to the rear connector of the computer, and the other end to the...

Installing the Serial or USB Touch Drivers
The Touch driver software can be downloaded from the Web or from the HP software and documentation
CD included with the monitor.
Downloading Drivers from the Web
1.Insert the HP software and documentation CD in the computer’s CD-ROM drive. The CD will open
to a menu screen.
2.From the menu screen, select Elo TouchSystems TouchTools.
3.Click Install Driver for This Computer.
4.Click Yes to download the latest drivers from the Elo Website.
5.Select your operating...

Removing the Monitor Stand
If you are mounting the panel to a wall or other mounting fixture, you must remove the monitor stand
from the panel. The monitor has four mounting holes on the back side of the panel that adheres to the
VESA mounting standard.
CAUTION:This monitor supports the VESA industry standard 75mm mounting holes. To attach a third
party mounting solution to the monitor, four 4mm, 0.7 pitch, and 10mm long screws are required (not
provided with the monitor). Longer screws should not be...

Tilting the Monitor
For viewing clarity, tilt the monitor forward (up to -5 degrees) or backward (up to 90 degrees).
Figure 3-3  Tilting the Monitor
CAUTION:In order to protect the monitor, be sure to hold the base when adjusting the LCD, and take
care not to touch the screen.
Locating the Rating Labels
The rating labels on the monitor provide the spare part number, product number, and serial number.
You may need these numbers when contacting HP about the monitor model. The rating labels are
located on...

4 Operating the Monitor
Installing the Monitor Driver
The CD that comes with the monitor contains monitor driver files you can install on your computer:
●an .INF (Information) file
●an .ICM (Image Color Matching) file
PDF Complete is supplied on this CD and can be installed from the menu.
NOTE:If the monitor does not include a CD, the .INF and .ICM files can be downloaded from the HP
monitors support Web site. See 
Downloading from the Worldwide Web on page 11 in this chapter.
The Information File
The...

Installing the .INF and .ICM Files
After you determine that you need to update, you can install the .INF and .ICM files from the CD or
download them.
Installing from the CD
To install the .INF and .ICM files on the computer from the CD:
1.Insert the CD in the computer CD-ROM drive. The CD menu is displayed.
2.View the Monitor Driver Software Readme file.
3.Select Install Monitor Driver Software.
4.Follow the on-screen instructions.
5.Ensure that the proper resolution and refresh rates appear in the...

Front Panel Controls
Table 4-1  Monitor Front Panel Controls
Control Function
1PowerTurns the monitor on or off.
2SelectSelects the adjustment items from the OSD menus.
3Enter the brightness adjustment.
Decrease value of the adjustment item.
Select item counter-clockwise.
4Enters contrast adjustment.
Increase value of the adjustment item.
Select item.
5 Menu/Exit Displays or exits the OSD menus.
12 Chapter 4   Operating the Monitor ENWW
 

Using the On-Screen Display
Use the On-Screen Display (OSD) to display and select OSD menu functions. To access the OSD, do
the following:
1.Press the Menu button on the side panel to activate the OSD menu.
2.Use the up arrow or down arrow controls to move clockwise or counterclockwise through the menu.
Press the Enter key on the keyboard, the parameter will be highlighted when selected.
3.To quit the OSD screen at any time during the operation, press the Menu button. If the OSD remains
untouched for a...

IconOSD ControlDescription
OSD LanguageSelects the language in which the OSD menu is displayed.
Information Description Indicates the current resolution, H-Frequency and V-Frequency.
NOTE:When adjusting the Clock and Clock Phase values, if the monitor images become distorted,
continue adjusting the values until the distortion disappears. To restore the factory settings, select the
Recall Defaults menu in the on-screen display.
Identifying Monitor Conditions
Special messages will appear on the monitor...