HP L1710 User Guide
Here you can view all the pages of manual HP L1710 User Guide. The HP manuals for Monitor are available online for free. You can easily download all the documents as PDF.
Page 31
Adjusting the Monitor Settings The monitor settings can be adjusted from the On-Screen Display (OSD) menu or from the HP Display Assistant utility. Using the On-Screen Display Menu Use the On-Screen Display (OSD) to adjust the screen image based on your viewing preferences. To access the OSD, do the following: 1.If the monitor is not already on, press the Power button to turn on the monitor. 2.To access the OSD Menu, press the Menu button on the monitor’s front panel. 3.To navigate through the OSD Menu,...
Page 32
OSD Menu Selections The following table lists the On-Screen Display (OSD) menu selections and their functional descriptions. After changing an OSD menu item, and if the menu screen has these options, you may choose to: ●Cancel—to return to the previous menu level. ●Save and Return—to save all changes and return to the OSD Main Menu screen. This Save and Return option is only active if you change a menu item. Table 4-2 OSD Menu IconMain MenuSubmenuDescription BrightnessAdjustable scaleAdjusts the...
Page 33
IconMain MenuSubmenuDescription 9300 KChanges to slightly blueish white. 6500 KChanges to slightly reddish white. Custom ColorSelects and adjusts your own color scales: ●R—sets your own red color levels ●G—sets your own green color levels ●B—sets your own blue color levels sRGBSets your screen colors to adapt to the color standards used in the image technology industry. LanguageSelects the language in which the OSD menu is displayed. The factory default is English. ManagementSelects the OSD and power...
Page 34
IconMain MenuSubmenuDescription Mode DisplayDisplays the resolution, refresh rate and frequency information on the screen each time the OSD Main Menu is accessed. Select: ●On ●Off The factory default is On. Power-On Status DisplayDisplays the operating status of the monitor each time the monitor is powered on. Select the location to display the status to: ●Top ●Middle ●Bottom ●Off The factory default is Top. DDC/CI SupportAllows the computer to control some OSD menu features such as brightness, contrast...
Page 35
IconMain MenuSubmenuDescription Disable/Enable Auto- SwitchingEnables or disables the systems automatic video signal input-switching feature. The factory default is enabled. Default Video InputSelects the default or primary video input signal when the monitor is connected to two active and valid video sources. The monitor will automatically determine the video format. The default input selection is DVI. Analog — VGA — Selects VGA input. Digital — DVI — Selects DVI input. InformationSelects and displays...
Page 36
Optimizing Digital Conversion This monitor contains advanced circuitry that allows the flat panel screen to function like a standard monitor. Two controls in the on-screen display can be adjusted to improve image performance: Clock and Clock Phase. NOTE:The Clock and Clock Phase controls are adjustable only when using an analog input. These controls are not adjustable for digital inputs. The Clock must first be set correctly since the Clock Phase settings are dependent on the main Clock setting. Use...
Page 37
Identifying Monitor Conditions Special messages will appear on the monitor screen when identifying the following monitor conditions: ●Input Signal Out of Range—Change resolution setting to 1280 x 1024 – 60Hz, —Indicates the monitor does not support the input signal because the resolution and/or refresh rate are set higher than the monitor supports (models L1950, L1750, L1910 and L1710).. ●Input Signal Out of Range—Change resolution setting to 1440 x 900 – 60Hz, —Indicates the monitor does not support the...
Page 38
To set the timer: 1.Press the Menu button on the monitor front panel to display the OSD Menu. 2.Scroll down and highlight Management. 3.Press the Menu button to select Management. 4.Scroll down and highlight and select Sleep Timer > Set Current Time. NOTE:You must set the current local time before you reset the time for Sleep Time or On Time. Note that the time is displayed in a 24–hour clock format. For example, 1:15 p.m. is displayed as 13 hours 15 minutes. 5.Press the Menu button once to enter the...
Page 39
Table 4-3 HP Display LiteSaver Configuration Options Select This OptionTo Do This Enable Display LiteSaverEnables the HP Display LiteSaver functions; deselect to disable the HP Display LiteSaver. Display OffSets the time when the monitor automatically turns off. This does not affect screen saver operation, which has priority over the HP Display LiteSaver. Display OnSets the time when the monitor automatically turns on. This does not affect screen saver operation, which has priority over the HP Display...
Page 40
Installing the sRGB ICM File for Microsoft Windows 2000 and Windows XP NOTE:To complete the following procedure, you must be logged in as an administrator or a member of the administrator’s group. If the computer is connected to a network, network policy settings may prevent you from completing this procedure. The sRGB ICM file does not support Windows 95 and Windows NT operating systems. 1.Click the Display icon in the Control Panel. 2.In the Display Properties windows, select the Settings tab, then...