HP L1706 User Guide

Technical Specifications 
Factory Preset Display Modes (Continued) 
Preset Pixel Format Horz Freq (kHz) Vert Freq (Hz) 
13 1152 x 900 71.7 76.1 
14 1280 x 1024 64.0 60.0 
15 1280 x 1024 80.0 75.0 
* Modes 12, 13, 14, and 15 apply to 1706 and 1906 models only 
Entering User Modes 
The video controller signal may occasionally call for a mode that 
is not preset if: 
■ You are not using a standard graphics adapter. 
■ You are not using a preset mode. 
If this occurs, you may need to readjust the parameters...

Technical Specifications 
blanked, the backlight is turned off, and the Power light is turned 
amber. When the monitor is in the reduced power state, the 
monitor will utilize less than 2 watts of power. There is a brief 
warm up period before the monitor will return to its normal 
operating mode. 
Refer to your computer manual for instructions on setting energy 
saver features (sometimes called power management features). 
✎ The above energy saver feature only works when connected to 
computers that...

C 
Agency Regulatory Notices 
Federal Communications 
Commission Notice 
This equipment has been tested and found to comply with the 
limits for a Class B digital device, pursuant to Part 15 of the FCC 
Rules. These limits are designed to provide reasonable protection 
against harmful interference in a residential installation. This 
equipment generates, uses, and can radiate radio frequency 
energy and, if not installed and used in accordance with the 
instructions, may cause harmful interference to...

Agency Regulatory Notices 
Modifications 
The FCC requires the user to be notified that any changes or 
modifications made to this device that are not expressly approved 
by Hewlett Packard Company may void the user's authority to 
operate the equipment. 
Cables 
Connections to this device must be made with shielded cables 
with metallic RFI/EMI connector hoods to maintain compliance 
with FCC Rules and Regulations. 
Declaration of Conformity for Products 
Marked with the FCC Logo (United 
States...

Agency Regulatory Notices 
To identify this product, refer to the Part, Series, or Model 
number found on the product. 
Materials disposal 
This HP product contains the following materials that might 
require special handling at end-of-life: 
■ Mercury in the fluorescent lamp in the display LCD. 
■ Lead in the solder and some component leads. 
Disposal of this material can be regulated because of 
environmental considerations. For disposal or recycling 
information, please contact your local authorities...

 
Agency Regulatory Notices 
Compliance with these directives implies conformity to 
applicable harmonized European standards (European Norms) 
which are listed on the EU Declaration of Conformity issued by 
Hewlett-Packard for this product or product family. 
This compliance is indicated by the following conformity 
marking placed on the product: 
Disposal of Waste Equipment by Users 
in Private Household in the European 
Union 
This symbol on the product or on its packaging 
indicates that this...

Agency Regulatory Notices 
Japanese Notice

Korean Notice

ENERGY STAR Compliance 
Monitors that are marked with the ENERGY STAR Logo meet 
the requirements of the U.S. Environmental Protection Agency 
(EPA) ENERGY STAR program. As an ENERGY STAR Partner, 
Hewlett Packard Company has determined that this product meets 
the ENERGY STAR guidelines for energy efficiency. Specific 
details on using the Energy Saving features can be found in the 
energy saver or power management section of the computer...

Agency Regulatory Notices 
The power cord set (flexible cord or wall plug) received with the 
monitor meets the requirements for use in the country where you 
purchased the equipment. 
If you need to obtain a power cord for a different country, you 
should purchase a power cord that is approved for use in that 
country. 
The power cord must be rated for the product and for the voltage 
and current marked on the product's electrical ratings label. The 
voltage and current rating of the cord should be...

D

LCD Monitor Quality 
and Pixel Policy 
The TFT monitor uses high-precision technology, manufactured 
according to HP standards, to guarantee trouble-free 
performance. Nevertheless, the display may have cosmetic 
imperfections that appear as small bright or dark spots. This is 
common to all LCD displays used in products supplied by all 
vendors and is not specific to the HP LCD. These imperfections 
are caused by one or more defective pixels or sub-pixels. 
■�A pixel consists of one red, one green,...

LCD Monitor Quality and Pixel Policy 
To locate defective pixels, the monitor should be viewed under 
normal operating conditions, in normal operating mode at a 
supported resolution and refresh rate, from a distance of 
approximately 50 cm (16 in.). 
HP expects that, over time, the industry will continue to improve 
its ability to produce LCDs with fewer cosmetic imperfections 
and HP will adjust guidelines as improvements are made. 
D–2 User Guide