HP L1506 User Guide
Have a look at the manual HP L1506 User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1114 HP manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Troubleshooting Problem “Out of Range. Set Monitor to 1280 x 1024 @ 60Hz” is displayed on screen. Possible Cause Video resolution and/or refresh rate are set higher than what your monitor supports. Solution Restart your computer and enter Safe Mode. Change your settings to a supported setting (see “Factory Preset Display Modes” table in Appendix B). Restart your computer so that the new settings take effect. HP Display LiteSaver doesn’t turn off the monitor screen The Activity Extension time has not elapsed. The default Activity Extension value is set to 10 minutes. The HP Display LiteSaver will wait to detect no input or movement from the keyboard or mouse for 10 consecutive minutes after the Display Off time has passed, before the monitor enters into low-power mode. For example, if the Display Off time is set to 5 minutes from the current time and the Activity Extension is set to 10 minutes, the HP Display LiteSaver will not actually turn off the display until 10 minutes of inactivity has elapsed, even though the Display Off time is 5 minutes from now. User Guide A–3
Troubleshooting Problem Possible Cause Solution The HP Display LiteSaver may not be compatible with your computer system. Some notebook computers are not compatible and the monitor power can not be controlled. Confirm that the HP Display LiteSaver is compatible with your system. 1. Right-click on the HP Display LiteSaver icon in the system tray. 2. Select “Power Off Display” from the menu. The monitor screen should turn off if the system is compatible. To turn the monitor back on, wait 5 seconds and move the mouse. ✎ If the monitor did not turn off, then your computer graphics driver is not compatible with the HP Display LiteSaver software. The monitor is off but The monitor’s power Check the monitor’s OSD it did not seem to saving control is menu setting for power enter into a disabled. saving enable/disable low-power sleep controls. The control should mode. be set to enable to allow the monitor to enter into low-power modes. Using the Worldwide Web For online access to technical support information, self-solve tools, online assistance, community forums of IT experts, broad multivendor knowledge base, monitoring and diagnostic tools, go to: http://www.hp.com/support. A–4 User Guide
Troubleshooting Preparing to call Technical Support If you cannot solve a problem using the troubleshooting tips in this section, you may need to call technical support. Have the following information available when you call: ■ The monitor ■ Monitor model number ■ Serial number for the monitor ■ Purchase date on invoice ■ Conditions under which the problem occurred ■ Error messages received ■ Hardware configuration ■ Hardware and software you are using User Guide A–5
B Technical Specifications ✎ All performance specifications are provided by the component manufacturers. Performance specifications represent the highest specification of all HP’s component manufacturers’ typical level specifications for performance and actual performance may vary either higher or lower. 1506 Flat Panel Monitor Display 15.0 inches 38.1 cm Type TFT LCD Viewable Image Size 15.0-inch diagonal 38.1 cm Tilt --5 to 30o Maximum Weight 7.0 lbs. 3.20 kg (unpacked) (Unpacked) Dimensions (include pedestal) Height 14.0 inches 355 mm Depth 8.0 inches 203 mm Width 13.4 inches 340 mm Maximum Graphic Resolution 1024 x 768 (60 Hz) Text Mode 720 x 400 Dot Pitch 0.297 (H) x 0.297 (W) mm Horizontal Frequency 30 to 63 kHz User Guide B–1
Technical Specifications 1506 Flat Panel Monitor (Continued) Vertical Refresh Rate 50 to 76 Hz Environmental Requirements Temperature: Operating Temperature 41 to 95o F 5 to 35o C Non-operating Temperature -4 to 140o F --20 to +60o C Relative Humidity 20 to 80% Power Source 100 – 240 VAC, 50 – 60 Hz Altitude: Operating 0 to 12,000 feet 0 to 3657.6 m Non-operating 0 to 40,000 feet 0 to12192 m Power Consumption
Technical Specifications 1706 Flat Panel Monitor Display 17.0 inches 43.18 cm Type TFT LCD Viewable Image Size 17.0-inch diagonal 43.18 cm Tilt --5 to 30o Maximum Weight 10.1 lbs. 4.60 kg (unpacked) (Unpacked) Dimensions (include pedestal) Height 15.6 inches 395 mm Depth 8.0 inches 203 mm Width 14.8 inches 375 mm Maximum Graphic Resolution 1280 x 1024 (60 Hz) Text Mode 720 x 400 Dot Pitch 0.264 (H) x 0.264 (W) mm Horizontal Frequency 30 to 83 kHz Vertical Refresh Rate 50 to 76 Hz Environmental Requirements Temperature: Operating Temperature 41 to 95o F 5 to 35o C Non-operating Temperature -4 to 140o F --20 to +60o C Relative Humidity 20 to 80% Power Source 100 – 240 VAC, 50 – 60 Hz Altitude: Operating 0 to 12,000 feet 0 to 3657.6 m Non-operating 0 to 40,000 feet 0 to12192 m User Guide B–3
Technical Specifications 1706 Flat Panel Monitor (Continued) Power Consumption
Technical Specifications 1906 Flat Panel Monitor Display 19.0 inches 48.3 cm Type TFT LCD Viewable Image Size 19.0-inch diagonal 48.3 cm Tilt --5 to 30o Maximum Weight 11.7 lbs. 5.30 kg (unpacked) (Unpacked) Dimensions (includes pedestal) Height 16.8 inches 427 mm Depth 8.0 inches 203 mm Width 16.6 inches 422 mm Maximum Graphic Resolution 1280 x 1024 (60Hz) Text Mode 720 x 400 Dot Pitch 0.294 (H) x 0.294 (W) mm Horizontal Frequency 30 to 83 kHz Vertical Refresh Rate 50 to 76Hz Environmental Requirements Temperature: Operating Temperature 41 to 95o F 5 to 35o C Non-operating Temperature --4 to 140o F --20 to +60o C Relative Humidity 20 to 80% Power Source 100 –- 240 VAC, 50 – 60 Hz Altitude: Operating 0 to 12,000 feet 0 to 3657.6 m Non-operating 0 to 40,000 feet 0 to12192 m User Guide B–5
1 2 3 4 5 6 7 8 9 10 11 12 Technical Specifications 1906 Flat Panel Monitor (Continued) Power Consumption