HP Deskjet F4283 User Manual

Chapter 1 
8 HP Deskjet F4200 All-in-One series Help
HP Deskjet F4200 All-in-One series 
Help
 

2 HP All-in-One overview
The HP Deskjet F4200 All-in-One series is a versatile device that enables easy-to-use 
copying, scanning, and printing. 
Copy
The HP All-in-One allows you to produce high-quality color and black-and-white copies 
on a variety of paper types. You can enlarge or reduce the size of an original to fit a 
specific paper size, adjust the copy quality, and make high-quality copies of photos. 
Scan
Scanning is the process of converting text and  pictures into an electronic format for...

LabelDescription
1Control panel
2Front access door
3Paper-width guide
4Input tray
5Tray extender
6Print cartridge door
7Glass
8Lid backing
9Rear access door
10Rear USB port
11Power connection*
* Use only with the power adapter supplied by HP.
Control panel buttons
Chapter 2 
10 HP All-in-One overview
HP All-in-One overview
 

LabelIconName and Description
1Ink Level lights: Show ink level information for each print cartridge, four for the tri-color cartridge and four for the black cartridge. 
Check Print Cartridge lights: Indicates the need to reinsert the specified print cartridge, replace the print cartridge, or close the print cartridge door. TheBlack  light indicates that the problem is with the black print cartridge, and the  Color light indicates that the problem is with the tri-color print cartridge.
2Scan: Starts...

LabelIconName and Description
When the HP All-in-One is off, a minimal amount of power is still used by the product. To completely disconnect the power supply to the HP All-in-One, turn the product off, and then unplug the power cord. 
CAUTION: Before you unplug the power cord, you must press the On button and allow the HP All-in-One to turn itself off. This prevents the printcartridges from drying out.
Status light overview
Several indicator lights inform you of the status of the HP All-in-One....

The following table describes common situations and explains what the lights mean.
Light statusWhat it means
All lights are off.The HP All-in-One is turned off. Press the On button to turn on the product.
The  On light and one of the Paper Selection  lights are on.The HP All-in-One is ready for printing, scanning, or copying.
The On light is blinking.The HP All-in-One is busy printing, scanning, copying, or aligning the print cartridges.
The  On light blinks quickly for 3 seconds and then is on...

NOTE:The HP Photosmart software supports the following file formats: BMP, DCX, 
FPX, GIF, JPG, PCD, PCX,  TIF, PICT, PSD, PCS, EPS, TGA, SGI, PDF, and PNG
Chapter 2 
14 HP All-in-One overview
HP All-in-One overview
 

3 Find more information
You can access a variety of resources, both printed and onscreen, that provide 
information about setting up and using the HP All-in-One.
Setup Guide 
The Setup Guide provides instructions  for setting up the HP All-in-One and installing software. Make sure you follow the steps in the Setup Guide in order. 
If you have problems during setup, check the Setup Guide for troubleshooting information, or see Troubleshooting  in this onscreen Help.
Basics Guide 
The Basics Guide contains...

Chapter 3 
16 Find more information
Find more information
 

4 How do I?
This section contains links to commonly performed tasks, such as printing photos and 
optimizing your print jobs. 
•How do I change the print settings? 
•How do I print borderless photos on 10 x 15 cm (4 x 6 inch) paper? 
•How do I load envelopes? 
•How do I scan using the control panel?
•How do I get the best print quality? 
•How do I print on both sides of the paper? 
•How do I replace the print cartridges?
•How do I align the print cartridges?
•How do I clear a paper jam?
How do I? 17
How...