HP Deskjet F4272 User Manual

3.Click the Device Services tab. 
4. Click Clean the Print Cartridges. 
5. Follow the prompts until you are satisfied with the quality of the output, and then click 
Done . 
If print quality still seems poor after you clean the print cartridges, try cleaning the 
print cartridge contacts before replacing the affected print cartridge. 
Related topics 
•Clean the print cartridge contacts 
•Replace the print cartridges
Clean the print cartridge contacts
CAUTION: Do not clean the print cartridge contacts...

2.Wait until the print carriage is idle and silent, and then unplug the power cord from 
the back of the product. 
3. Lightly press down on the print cartridge to release it, and then pull it towards you out 
of the slot.
NOTE: Do not remove both print cartridges at the same time. Remove and clean 
each print cartridge one at a time. Do not leave a print cartridge outside the HP All-
in-One for more than 30 minutes.
4. Inspect the print cartridge contacts for ink and debris buildup. 
5. Dip a clean foam...

9.Repeat if necessary for the other print cartridge. 
10. Gently close the print cartridge door and plug the power cord into the back of the 
product.
Related topics 
•Clean the area around the ink nozzles
•Replace the print cartridges
Clean the area around the ink nozzles
If the HP All-in-One is used in a dusty environment, a small amount of debris might 
accumulate inside the device. This debris can include dust, hair, carpet, or clothing fibers.
When debris gets on the print cartridges, it can cause...

To clean the area around the ink nozzles 
1. Turn on the product and open the print cartridge door. 
The print carriage moves to the far right side of the product.
2. Wait until the print carriage is idle and silent, and then unplug the power cord from 
the back of the product. 
3. Lightly press down on the print cartridge to release it, and then pull it towards you out 
of the slot.
NOTE: Do not remove both print cartridges at the same time. Remove and clean 
each print cartridge one at a time. Do not...

7.Hold the print cartridge with the HP logo on top, and insert the print cartridge back 
into the slot. Make sure you push the print cartridge in firmly until it snaps into place.
8. Repeat if necessary for the other print cartridge. 
9. Gently close the print cartridge door and plug the power cord into the back of the 
product.
Related topics
Clean the print cartridges
Remove ink from your skin and clothing
Follow these instructions to remove ink from your skin and clothing:
SurfaceRemedy
SkinWash the...

11 Shop for ink supplies
For a list of print cartridge numbers, see the printed documentation that came with the 
HP All-in-One. You can also use the software  that came with the HP All-in-One to find 
out the reorder number for all the print cartridges. You can order print cartridges online 
from the HP Web site. Additionally, you can contact a local HP reseller to find out the
correct print cartridge reorder numbers for your product and purchase print cartridges. 
To order genuine HP supplies for the...

Chapter 11 
84 Shop for ink supplies
Shop for ink supplies
 

12 Troubleshooting
This section contains the following topics: 
•View the Readme file 
•Hardware setup troubleshooting 
•Software installation troubleshooting 
•Paper jams 
•Print cartridge troubleshooting
•Print quality troubleshooting
•Print troubleshooting 
•Copy troubleshooting 
•Scan troubleshooting
•Errors
View the Readme file
You might want to refer to the Readme file for information on system requirements and 
possible installation problems. 
You can access the Readme file by clicking  Start,...

This section contains the following topics: 
•The product will not turn on 
•I connected the USB cable, but I am having problems using the HP All-in-One with
my computer
•After setting up the product, it does not print
The product will not turn on
Try the following solutions if there are no light indications, no noise, and no movement 
from the printer when you turn on the product. 
•Solution 1: Make sure you are using the power cord that came with the product 
•Solution 2: Reset the product 
•Solution...

•Test the power outlet to make sure it is working. Plug in an appliance that you 
know works, and see if the appliance has power. If not, then there might be a 
problem with the power outlet. 
• If you plugged the product into a switched outlet, make sure the outlet is switched 
on. If it is switched to on but still does not work, then there might be a problem
with the power outlet. 
Cause: The product was not being used with the power cord it was shipped with. 
If this did not solve the issue, try the...