HP Deskjet 1050A User Manual

HP Deskjet 1050 All-in-One series
 

Contents
1 How Do I?..................................................................................................................................3 
2 Get to know the HP All-in-One 
Printer parts.................................................................................................................. ..............5 
Control panel features......................................................................................................... .......6 
Status...

2
Contents
 

1How Do I?
Learn how to use your HP All-in-One 
•Printer parts 
•Copy documents or photos 
•Load media 
•Replace the cartridges 
•Clear a paper jam
How Do I? 3
How Do I?
 

Chapter 1 
4 How Do I?
How Do I?
 

2 Get to know the HP All-in-One
•Printer parts 
•Control panel features
•Status Lights
Printer parts
1Input tray
2Paper-width guide for the input tray
3Control panel
4Cartridge door
5Output tray
6Output tray extender (also referred to as the tray extender)
7Cartridges
Printer parts 5
Get to know the HP All-in-One
 

Control panel features
!
1Power: Turns the product on or off. When the product is off, a minimal amount of power is still 
used. To completely remove power, turn off the product, then unplug the power cord.
2Cancel : Stops the current operation.
3Start Copy Black: Starts a black-and-white copy job. Increase the number of copies (up to 
10) by pressing the button multiple times. Acts as a resume button after resolving print problems.
4Start Copy Color : Starts a color copy job. Increase the number of...

Status Lights
When the product is turned on, the on button light will be lit. When the product is 
processing a job, the on light will be blinking. Additional blinking lights signal errors that 
you can resolve. See below to learn about blinking lights and what to do.
BehaviorSolution
Power light is blinking and attention light is on (not blinking)The output tray is closed, there is nopaper, or there is a paper jam.
Replace the cartridges , correctly Loadmedia, or Clear a paper jam. Press Start Copy...

BehaviorSolution
Identify a defective cartridge to identify if only one cartridge is a defective.
Both cartridge lights and attention light are blinkingThe cartridge carriage inside the printer has stalled. 
Open cartridge door and make sure the carriage is not obstructed, closedoor, and then press the  Start Copy Black  or Start Copy Color button to resume.
Power light, both cartridge lights, and attention light areblinkingThe printer is in an error state. 
To exit the error state, reset the product....