HP DesignJet Z2100 GP 24 User Manual
Here you can view all the pages of manual HP DesignJet Z2100 GP 24 User Manual. The HP manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 41
Unload paper key procedure with paper on the roll If there is paper on the roll, use the following procedure. 1.Press the Unload paper key on the front panel. 2.When prompted by the front-panel display, lift the blue lever on the left. 3.When prompted by the front-panel display, lightly rewind the paper from the end of the spindle until removed from the printer. 4.When prompted by the front-panel display, lower the blue lever. Paper menu procedure with paper on the roll If there is paper on the roll, you...
Page 42
WARNING!For sheets thicker than 0.5mm, you must have space behind the printer equal to the length of the sheet. Easy loading procedure 1.Standing in front of the printer, open the sheet tray. If the sheet is long, extend the right extension. If the sheet is also wide extend the left extension. TipIf the tray is difficult to open, try opening from behind the printer. NOTEThe extensions are seven cm and snap in place. 2.Insert the sheet into the feeder. Load your sheet aligned with the load line and insert...
Page 43
5.Enter your paper category and type. TipIf you have loaded a paper type whose name does not appear in the paper list (neither in the driver nor in the front panel), you can choose a generic paper name instead. For example, if you are loading HP Aquarella Art Paper or Epson Smooth Fine Art Paper, and you dont find the exact name in the paper list, you can choose Fine art paper. 6.The printer checks the alignment and measures the sheet. NOTEDepending on the length of the sheet, it feeds out the front of...
Page 44
2. Press the Menu key to return to the main menu and select the Paper menu icon . 3.Select Paper load. 4.Select Load sheet. 34 Chapter 4 Paper handling ENWW Paper handling
Page 45
5.Select your paper category and type. TipIf you have loaded a paper type whose name does not appear in the paper list (neither in the driver nor in the front panel), you can choose a generic paper name instead. For example, if you are loading HP Aquarella Art Paper or Epson Smooth Fine Art Paper, and you dont find the exact name in the paper list, you can choose Fine art paper. 6.Continue with step two of the easy loading procedure, skipping steps four and five. Unload a single sheet To unload a single...
Page 46
2.Select Unload paper. The sheet unloads out of the front of the printer, either catch it manually or allow it to fall in the basket. View information about the paper To view the loaded paper information, press the View loaded paper key on the front panel. You can also select the Paper menu icon and then View loaded paper. The following information is displayed on the front panel: ●Roll or sheet status ●Paper manufacturers name ●Paper type you have selected ●Width of the paper in millimeters...
Page 47
There are three ways to assign a profile for a new paper type. ●Use a HP factory paper profile by selecting the closest category and type in the front panel, HP Easy Printer Care (Windows), or HP Printer Utility (Mac OS) NOTEColors may not be accurate. This method is not recommended for high-quality prints. ●Download the correct paper profile from: http://www.hp.com/go/designjet/downloads NOTEHP only provides profiles for HP paper types. If you do not find the paper profile you want on the Web, you may...
Page 48
8.Once the new calibration parameters are calculated and stored, you are reminded to create an ICC profile. Click Done. Your custom paper is added to the paper category you selected. 9.To create an ICC profile, which allows you to print on your paper with the best possible color accuracy, see Color profiling on page 59. Maintain paper To maintain paper quality, follow the recommendations below. ●Store rolls covered by another piece of paper or cloth ●Store cut sheets covered and clean or brush them...
Page 49
●From the Embedded Web Server, select the Setup tab, then Printer Settings, and change the Cutter option. ● Press the Menu key to return to the main menu, select the Setup menu icon , and then Print retrieval > Enable cutter. NOTETo cut rolled paper while the automatic cutter is disabled, see Feed and cut the paper on page 39. Feed and cut the paper To feed and cut the paper when the automatic cutter has been disabled, press the Form feed and cut key on the front panel. The paper advances and the...