HP Designjet T790 1118 mm User Manual

Maximum Detail option. This option is available only if you are printing on glossy paper and you have
selected Best print quality.
●In the driver dialog (Mac OS Print dialog): select Custom instead of Standard print-quality
options, then check the Maximum Detail box.
●On the Embedded Web Servers Submit Job page (T1300 series): select Basic
settings > Print quality > Custom. Set Quality level to Best, and Maximum detail to
On.
●
Using the front panel: press 
, then , then Setup > Printing preferences >...

NOTE:If the first print job after loading paper is a borderless job, the printer may trim the leading
edge of the paper before printing.
At the end of a borderless print, the printer normally cuts the print slightly inside the image area to
ensure that the print is borderless. It then cuts the paper again so that no residual part of the image is
included in the next print. However, if the job is cancelled, or if there is white space at the bottom of
the image, only a single cut is made.
Print with crop...

◦In the Mac OS PostScript Print dialog (PostScript printers): select the Finishing
panel, then Remove Top/Bottom Blank Areas and/or Rotate by 90 degrees.
◦On the Embedded Web Servers Submit Job page (T1300 series): select
Advanced settings > Roll options > Remove top/bottom blank areas and/or
Rotate.
●If you check the print preview on your computer before printing, you can sometimes avoid wasting
paper on prints containing obvious mistakes. See 
Preview a print on page 61.
Nest jobs to save roll paper...

●The Mirror Image setting must be the same for all pages.
●The Rendering Intent must be the same for all pages.
●The Cutter setting must be the same for all pages.
●The color adjustment settings must be the same for all pages. See 
Color adjustment options
on page 89.
●Pages must be all color, or all grayscale: not some in color and some in grayscale.
●All pages must be in one or other of the following two groups (the two groups cannot be mixed in
the same nest):
◦HP-GL/2, RTL, TIFF, JPEG
◦PostScript,...

Roll protection (T1300 series)
If you choose to protect a roll, jobs will be printed on it only if the job explicitly specifies the roll
number or the paper type loaded on the roll. This may be useful, for example, in the following cases.
●To stop people from accidentally printing unimportant jobs on expensive paper.
●To avoid printing on a particular roll when printing from AutoCAD without interacting with the HP
printer driver.
To protect a roll, go to the front panel and press 
, then , then Setup >...

Table 7-1  Recommended settings for unattended printing
Print type Print mode MaxDetail Drying time Paper types
Lines Normal Off Optimal Coated, Bond,
Heavyweight Coated,
Glossy
Lines and fills Normal On Optimal Coated, Bond,
Heavyweight Coated,
Glossy
Maps Best On Optimal Coated, Heavyweight
Coated, Glossy
Renderings,
photographsBest On Optimal Coated, Heavyweight
Coated, Glossy
68 Chapter 7   PrintingENWW
 

8 Web-connected printing
Your printer can be connected to the Web, providing various benefits:
●Automatic firmware updates (see 
Update the firmware on page 138)
●Print on HP ePrinters from almost anywhere
●Print on HP ePrinters from almost any device, including smartphones, tablets, and laptops
For the latest information, see 
http://www.hp.com/go/designjeteprinters.
Print remotely with HP Designjet ePrint & Share
If you are working from home, and you want to print to your office printer, you can print...

In this way, you can print from anywhere with an Internet connection, without needing any printer
driver. There are a few limitations that you should bear in mind:
●The attached files to be printed must be in PDF, JPEG, or TIFF formats.
●The maximum file size is 10 MB, but your email server may have a lower limit.
●Files are printed in the original document size (at 100% scale), in normal quality, in color, and
normally in portrait orientation (some printers may offer autorotation)..
Print from a...

3.
To print the file, press the  button.
4.Select the printer if it is already listed; or, if necessary, press Add a printer and give your
printers email address to add it to the list.
5.Choose the print settings, then press Print.
NOTE:Printing may not start immediately.
Whenever you print a document with HP Designjet ePrint & Share, it is saved in your Online Print
History.
From other applications, when there is an ‘Open In’ option available, select ePrint & Share in order to
print your documents on a...

2.To view and print a file, select the category to filter your list of saved files (printed, scanned,
shared with me, or all). You will see a list of your files ordered by time. The file can be identified
by the name, the date and time of printing, the printer that was used, and the thumbnail.
3.Select the file, and a file preview is shown in the right panel. If the file contains multiple pages,
you can navigate through the pages using the arrows. You can also click the preview to enlarge it,
and zoom in...