HP Designjet T1120 SD User Manual

4.Press the Properties button and then select the Paper/Quality tab.
5.Choose whatever Document Size and Print Quality you want to use. If you want to define a new
custom paper size, press the Custom button.
6.Select the Features tab, and then Autorotate.
82 Chapter 8   Practical printing examples ENWW
Printing examples
 

7.Click OK, and check that the print preview in the Print dialog box seems correct.
Print a project
This section demonstrates how to print a project from Autodesk Design Review, AutoCAD and the
printers Embedded Web Server.
Using Autodesk Design Review
1.In Autodesk Design Review, select File > Batch printing wizard.
2.Press the Next button.
ENWWPrint a project 83
Printing examples
 

3.Select the files or folders that you want to print, select Use HP Instant Printing, and click Next.
4.Select your printer and paper size, then click OK.
Using Windows Explorer to print Autodesk Design Review files
1.Highlight in Windows Explorer the files you want to print. Right-click on the group of files and
select Use HP Instant Printing.
2.Select your printer and paper size, then click OK.
84 Chapter 8   Practical printing examples ENWW
Printing examples
 

Using AutoCAD
1.The AutoCAD window shows the Model tab followed by a tab for each layout. Normally one of the
layouts is printed rather than the model.
2.Select File > Plot.
3.You can see further options by pressing the circular button in the lower right corner of the window.
NOTE:The Quality option here does not refer to the final print quality but to the quality of AutoCAD
viewport objects that are sent for printing.
ENWWPrint a project 85
Printing examples
 

4.Press the Properties button.
5.Select the Device and Document Settings tab, and press the Custom Properties button.
6.Select the Paper/Quality tab, then select the paper type that you intend to use.
86 Chapter 8   Practical printing examples ENWW
Printing examples
 

7.Select the print quality (your own choice between speed and quality of printing).
8.Select Show preview before printing.
9.If you intend to print on roll paper, you must decide where the printer should cut the paper. Press
the Margins/Layout button.
10.Select Clip contents by margins.
ENWWPrint a project 87
Printing examples
 

11.Select the Features tab, then select the Autorotate and Crop lines options. Autorotation can help
to avoid wasting paper, and the crop lines will show you where to cut the paper after printing.
12.Press the OK button and save your configuration changes to a PC3 file.
13.When you have pressed the OK button, the printer will construct a print preview.
88 Chapter 8   Practical printing examples ENWW
Printing examples
 

Using the Embedded Web Server to submit files
From the HP Printer Utility or the Embedded Web Server, select Job Center > Submit Job. You will
see the window below.
Press the Add files button to choose the files from your computer that you want to print. The files must
be in one of the following formats:
●PDF (HP Designjet T1120ps only)
●PostScript (HP Designjet T1120ps only)
●TIFF (HP Designjet T1120ps only)
●JPEG (HP Designjet T1120ps only)
●HP-GL/2
●RTL
●CALS/G4
NOTE:When you print to a file, the file...

Use this option when the contents to be printed have white borders and a size equal to that of the paper
you have selected. The printer will use the white border for its margins and you will get a page of size
equal to that which is selected in the driver.
Print a presentation
This section demonstrates how to print a presentation from AutoCAD and from Photoshop.
Using AutoCAD
1.Open the AutoCAD file.
2.Select Print from Layout.
3.Select File > Plot.
4.Ensure that the correct printer is selected, then...

5.Select the Device and Document Settings tab, and press the Custom Properties button.
6.Select the Paper/Quality tab, then select the paper type that you intend to use.
7.Select the print quality (your own choice between speed and quality of printing).
ENWWPrint a presentation 91
Printing examples