HP Designjet L25500 42 in User Manual

HP Designjet L25500 Printer series
User’s guide (second edition)
 

Legal notices
© 2010 Hewlett-Packard Development
Company, L.P.
The information contained herein is subject
to change without notice.
The only warranties for HP Products and
services are set forth in the express warranty
statement accompanying such products and
services. Nothing herein should be
construed as constituting an additional
warranty. HP shall not be liable for technical
or editorial errors or omissions contained
herein.
May 2010 EditionTrademarks
Microsoft® and Windows® are U.S.
registered...

Table of contents
1  Introduction
Safety precautions ................................................................................................................................ 1
The printers main features ................................................................................................................... 4
The printers main components ............................................................................................................ 5
The Embedded Web Server...

6  Print options
Printer states ...................................................................................................................................... 69
Change margins ................................................................................................................................. 69
Request the printers internal prints .................................................................................................... 70
7  Accessories
Order accessories...

1 Introduction
Safety precautions
Before using your printer, read the following safety precautions to make sure you use the equipment
safely.
General safety guidelines
●Refer to installation instructions before connecting the printer to the supply.
●There are no operator-serviceable parts inside the printer. Refer servicing to qualified service
personnel.
●Turn off the printer, unplug both power cords from the power outlets, and call your service
representative in any of the following cases:
◦The power...

●Do not insert objects through slots in the printer.
●Test the functionality of the Residual Circuit Breaker (RCCB) every 6 months (refer to the
Maintenance Guide for details).
NOTE:A blown fuse may indicate malfunctioning electrical circuits within the system. Call your service
representative, and do not attempt to replace the fuse yourself.
Checking the functionality of the Residual Circuit Breaker (RCCB)
Following standard Residual Current Circuit Breaker (RCCB) recommendations, it is recommended...

Mechanical hazard
The printer has moving parts that could cause injury. To avoid personal injury, take the following
precautions when working close to the printer.
●Keep your clothing and all parts of your body away from the printers moving parts.
●Avoid wearing necklaces, bracelets and other hanging objects.
●If your hair is long, try to secure it so that it will not fall into the printer.
●Take care that sleeves or gloves do not get caught in the printers moving parts.
●Avoid standing close to the...

LabelExplanation
Electric shock hazard. The printer has two input power cords.
A voltage is still present in the drying and curing modules after
the main switch is turned off. There are no operator-
serviceable parts inside the printer. Refer servicing to qualified
service personnel. Disconnect all power cords before
servicing.
See installation instructions before connecting to the supply.
Ensure that the input voltage is within the printers rated voltage
range. The printer requires two dedicated lines,...

●Print on a wide range of substrates—including most low-cost, uncoated, solvent-compatible
substrates
●A range of HP recyclable substrates is available
●Durable prints with outdoor display permanence up to three years unlaminated, five years
laminated
●Accurate and consistent color reproduction with automatic color calibration (built-in
spectrophotometer)
●ENERGY STAR® qualified product
To send print jobs to your printer, you will need Raster Image Processor (RIP) software, which should
be run on a...

13.Loading table/take-up reel deflector
14.Drying module
15.Take-up reel sensor
16.Take-up reel spindle stop
17.Curing module
Rear view 60-in printer
1.Printhead cleaning container
2.Sockets for communication cables and optional accessories
3.Power switch and power sockets
4.Residual current circuit breakers for the heating components
Take-up reel motor
1.Take-up reel spindle lever
2.Manual winding buttons
3.Wind-direction switch
6 Chapter 1   IntroductionENWW
Introduction