HP DesignJet 510 610 mm User Manual

HP Matte Polypropylene
130 g/m² – 75 ft (22.9 m)Matte Film Q1903A (aen) Q1904A (aen)
HP Banners with Tyvek®
140 g/m² – 50 ft (15.2 m) Heavy Coated Paper C6798A (ajn)
HP Outdoor Paper
145 g/m² – 100 ft (30.5 m) Heavy Coated Paper Q1730A (en)
HP Blue Back Outdoor Billboard Paper
140 g/m² – 100 ft (30.5 m) Heavy Coated Paper C7949A (en)
HP Fine Art Printing Material
Front panel name
18 in
458 mm
24 in
610 mm
36 in
914 mm
42 in
1067 mm
HP Canvas Paper
180 g/m² – 35 ft (10.7 m) Canvas Q1724A (aen)
Metric...

Additional information about paper types
The following HP Premium Printing Material can be used to perform the printhead alignment, see Printhead alignment
.
• HP Bright White Inkjet Paper (Bond)
• HP Coated Paper
• HP Heavyweight Coated Paper
• HP High-Gloss Photo Paper
• HP Satin Poster Paper
You can also use Plain Paper in addition to the above.
To order any of the HP Premium Printing Material, see the pamphlet  Hewlett-Packard Printing Materials.
From time to time, new paper types may become...

Combinations of paper type and print quality selection
Use the following tables, given by application, to guide you when choosing your paper and selecting the print 
quality setting (Fast, Normal , Best ).
• CAD drawings—mono
•CAD drawings and GIS
—
color (lines and low density)
•CAD rendering, GIS and images
—
color and CAD (high ink density)
.
As a general guide:
• Fast  is best for draft copies of your prints at maximum throughput.
• Normal  is optimized so that you get the best line quality with the...

CAD drawings—mono
The following table lists the recommended print quality settings for specific usage with typical paper.
Supported paper types—mono
Usage
Typical paper selection
Recommended print quality setting
Drafts Plain Paper Bright Inkjet Paper
Natural Tracing Paper
Translucent Bond Fast or normal
Final versions Plain Paper Bright Inkjet Paper
Natural Tracing Paper
Translucent Bond
Coated Paper
Heavy Coated Paper
Matte Film
Clear Film Normal or Best
Archives Vellum Matte Film
Clear Film Best
Diazo...

CAD drawings and GIS
—color (lines and low density)
The following table lists the recommended print quality settings for specific usage with typical paper.
Supported paper types—color
Usage
Typical paper selection
Recommended print quality setting
Drafts Plain Paper
Bright Inkjet Paper
Natural Tracing Paper
Translucent Bond Fast or Normal
Final versions Plain Paper Bright Inkjet Paper
Coated paper
Heavy Coated Paper
Matte Film
Clear Film Normal or Best
Archives Matte Film Clear Film Best
Transparencies...

CAD rendering, GIS and images
—color and CAD (high ink density)
The following table lists the recommended print quality settings for specific usage with typical paper.Supported paper types—color and CAD
Usage
Typical paper selection
Recommended print quality setting
Matte Paper Heavy Coated Paper Normal or Best
Glossy High Gloss Photo Paper Normal or Best
Transparencies Clear Film Best
 

Handling your paper
Take the following precautions when handling paper:
• Handle film and glossy paper by the edges or wear cotton gloves. Skin oils can interact with the ink and cause it to smear.
• Although the ink systems supplied with this printer have good light fastness, colors will eventually fade or  change if exposed to sunlight over a long period of time.
• Rewrap partially used rolls if they are not being used, and do not stack rolls.
• Always keep unused rolls in their plastic wrappings to...

Obtaining roll or sheet paper information
If roll or sheet paper is loaded, the type of paper is displayed when you select the Paper menu on the front panel.
If there is no paper loaded, the front-panel display shows the following message and you will need to load roll or 
sheet paper.
Bright White Inkjet Paper
Plain Paper
Ve ll u m
Natural Tracing Paper
Translucent Bond
Clear Film
Matte Film
Coated Paper
Heavy Coated Paper
High-Gloss Photo
Canvas
Poster Paper
Roll or Sheet
 

Print times for a selected print qualityThe following table lists some typical printing times for D/A1 size paper.
Typical printing times
Print quality
Time (in seconds)
Mono lineson Bond
Color lineson Coated  Paper
Images
on Coated  Paper
Images
on Glossy  Paper
Fast 69 96 234 480
Normal 216 216 550 690
Best 360 285 940 990
 

Printable areaThe following topics detail the printable areas for each of the different paper size systems:• ANSI paper
The American National Standards Institute imperial paper sizing system.
• Architectural paperThe Architectural paper sizing system.
• ISO paperThe International Standards Organization metric paper sizing system, which is the size system commonly 
used in Europe.