HP DesignJet 4500ps User Manual

5.Change the value for each of the scanner’s cameras. Normally, only positive values should be
used.
6.Make test scans and readjust the values until you are satisfied that the lines are stitched
correctly.
7.Click OK to accept your settings.
Repeat this procedure until you are satisfied with the results.
To return the insertion slot height to its normal position:
1.Remove all material from the insertion slot.
2.Press the Automatic Thickness Adjustment Control key.
3.Press and hold the arrow down key...

One-to-one pixel viewing
View the image with one scanned pixel shown as one screen pixel.
Resize paper frame
The Resize Paper Frame tool is especially useful for copying non-standard paper sizes.
When activated, the Resize Paper Frame Tool partitions the areas around the paper frame into
sections. When a section is touched, the closest frame side or corner is resized to the new position.
Move tool
Move the image to get any part of it centered or visible in the preview window.
There are two ways to move...

There are three ways to move the frame:
●By dragging anywhere on the screen. Imagine you are gripping the frame and dragging it
around over the image.
●Touch a point on the screen, and that point then becomes the new center for the paper frame.
This method is especially useful when you are making spot test strips for printing. It lets you
continuously and rapidly reposition the frame on important areas that you want tested.
●Dragging the edges will resize the paper frame and is an alternative to the...

Add a new printer
To add a new HP Designjet printer to the printer list in your scanner software:
1.In the Setup tab, press the Options button.
2.Press the System button.
3.Press the button with the name of the printer that you want to add.
4.Follow the instructions on the screen.
230 Chapter 16   How do I... (scanner topics) [4500] ENWW
How do I... (scanner
topics) [4500]
 

Save files on a CD or DVD
Your HP Designjet is capable of writing to CDs or DVDs in the same easy way as it writes to any
other storage medium.
1.Insert a blank CD or DVD into the touch screen’s CD/DVD drive. You may also be able to write
to a partly-used CD or DVD, if the disc has not been ‘closed’.
2.Follow the normal steps for scanning or copying, but send the files to drive E: (the CD/DVD
drive).
3.When you have finished, the disc will normally be ejected automatically. Otherwise, press the
eject...

Accessing the shared folder from Windows 2000
1.On your computers desktop, double-click My Network Places.
2.In the Network Places window, double-click Add Network Place.
3.
In the Add Network Place Wizard window, enter http://scanner_ip/images, where
scanner_ip is the IP address of your scanner system, then click Next.
4.Enter your own choice of name by which you will refer to the folder on this computer, then click
Finish.
To access the shared folder subsequently, double-click My Network Places, and...

Press the Save button to save the changes you have made.
NOTEThe changes are saved in your current media profile.
Enable or disable scanner accounts
1.Press the Setup tab.
2.Press the Account button.
3.
Press the Tool button 
 if necessary.
4.In the Accounting box:
●Press the Delete button to delete the current account (the one whose name is displayed in
the box).
●Press the New button to create a new account, then enter a name for the new account.
The new account will automatically become the current...

Collate copies
1.Press the Print tab.
2.Press the Add to List button.
3.Using the check boxes, select multiple files for printing.
4.Press the Number of Sets button and select the number of copies you wish to print.
5.Press the Print button.
The files that you selected form a set, which is printed the number of times that you selected.
Clean the glass
1.Turn the scanner power off and disconnect the scanner power cable.
2.Push down on the two lever buttons found near the insertion slot on each side of the...

17 The problem is... (paper topics)
●The paper cannot be loaded successfully [4000]
●
The paper cannot be loaded successfully [4500]
●
A paper jam (paper stuck in the printer) [4000]
●
A paper jam (paper stuck in the printer) [4500]
●
A paper jam in drawer 2 [4500]
●
Prints do not stack properly in the bin [4000]
●
Prints do not stack properly in the basket [4500]
●
The printer uses a lot of paper to align the printheads
●
The paper moves while the printer is in standby mode [4500]
●
The printer unloads...

The paper cannot be loaded successfully [4000]
NOTEThis topic applies to the HP Designjet 4000 Printer series only.
●The paper may be loaded at an angle (skewed or mislocated). Check that the right-hand edge
of the paper is aligned with the half-circle on the right-hand side of the platen and, particularly in
the case of sheet paper, that the leading edge is aligned with the metal bar in the platen.
●The paper may be crumpled or warped, or may have irregular edges.
Rolls
●If the paper gets stuck in the...