HP DesignJet 4500 MFP User Manual

4.In the Default Source Profiles you must set the default profiles for solid colors and images that
dont have embedded profiles. The following default profiles are recommended: RGB: Adobe
RGB 1998, CMYK: SWOP for the USA and Euroscale Coated v2 for the rest of the world. Also
select the rendering intent, which QuarkXPress uses for all conversions; if in doubt, select
Relative Colorimetric. See 
Set the rendering intent.
5.Check the box Color Manage RGB sources to RGB destinations in the RGB Default...

NOTEEach object in QuarkXpress has its own color management. The solid colors use the
color profile and rendering intent selected in the default source profiles for Solid Colors (RGB,
CMYK, or Hexachrome) of the Color Management Preferences dialog box. The imported
objects have their own assigned profile and rendering intent. QuarkXPress will use the
rendering intent assigned to the image for both conversions, from the image color space to the
simulation color space, and from the simulation color space...

send the print job to the printer. There are from one to three options available, depending on license
and printer configurations.
●Windows is the default and is always available, regardless of the printer in use. It allows the
application to use the installed HP-GL/2 and RTL driver.
●PostScript is available only if your printer supports PostScript and the PostScript driver was
selected in the Name section. This allows you to output the file as a Postscript file. This option
may be useful in certain...

5.Select File > Print.
●Printer Engine: select Windows Printer (it will use the selected raster driver).
●Output Image Quality (Resample Ratio): this setting alters the number of pixels sampled
when an ArcMap print file is generated; it determines how many pixels in the map
document will be used to create the file sent to the printer.
●Fast = 1:5
●Normal = 1:3
●Best = 1:1 (as is)
The Best choice requires a lot of resources to process the print job, and could cause long
processing times and perhaps...

●Click the Properties button, select the HP RTL (RGB) TrueColor driver, and select the
resolution that will be sent to the printer.
●Select the Color Adjustment tab if you want to adjust gamma, brightness, contrast, or
saturation. You can preview the changes.
4.You can print now: click the OK button in this dialog box and in the Print dialog box.
ENWW Get accurate colors from ESRI ArcGIS 9 171
How do I... (color topics)
 

172 Chapter 10   How do I... (color topics) ENWW
How do I... (color topics)
 

11 How do I... (ink system topics)
●Remove an ink cartridge
●
Insert an ink cartridge
●
Remove a printhead
●
Insert a printhead
●
Manage printhead monitoring
●
Recover (clean) the printheads
●
Clean a printheads electrical connections
●
Align the printheads
●
Remove a printhead cleaner
●
Insert a printhead cleaner
●
Check the status of the ink system
●
Get ink cartridge statistics
●
Get printhead statistics
ENWW173
How do I... (ink system
topics)
 

Remove an ink cartridge
There are two types of ink cartridge removal.
●The ink cartridge is very low and you want to replace it with a full cartridge for unattended
printing (you can use up the remaining ink in the first cartridge at a more convenient time).
●The ink cartridge is empty or faulty, and you must replace it to continue printing.
CAUTIONDo not try to remove an ink cartridge while printing.
CAUTIONRemove an ink cartridge only if you are ready to insert another one.
WARNING!Make sure the...

3.Release the door catch by pressing on the top until it clicks.
4.Pull the door fully open.
5.Grip the blue tab in front of the cartridge you wish to remove.
6.Pull the blue tab down.
ENWWRemove an ink cartridge 175
How do I... (ink system
topics)
 

7.Then pull it outwards, towards you.
8.The cartridge comes out, in its drawer.
9.Lift the cartridge out of its drawer.
NOTEAvoid touching the end of the cartridge that is inserted into the printer, as there
may be ink on the connection.
NOTEAvoid storing partially used ink cartridges on their ends.
10.The front panel display will identify the missing ink cartridge.
176 Chapter 11   How do I... (ink system topics) ENWW
How do I... (ink system
topics)