HP DesignJet 4500 MFP User Manual

7.Attach the other end of the loop to the cross frame.
8.Using the same method, attach the other five loops.
9.Locate the bin against the printer.
ENWWAssemble the bin 87
How do I... (printer
assembly topics) [4500]
 

88 Chapter 3   How do I... (printer assembly topics) [4500] ENWW
How do I... (printer
assembly topics) [4500]
 

4 How do I... (software setup topics)
●Choose which connection method to use
●
Connect to a network (Windows)
●
Connect directly to a computer (Windows)
●
Uninstall the printer driver (Windows)
●
Connect to a network (Mac OS X)
●
Connect to a network (Mac OS 9) [4000]
●
Connect directly to a computer (Mac OS X)
●
Connect directly to a computer (Mac OS 9) [4000]
●
Uninstall the printer driver (Mac OS 9) [4000]
ENWW89
How do I... (software
setup topics)
 

Choose which connection method to use
The following methods can be used to connect your printer.
Connection typeSpeedCable lengthOther factors
Fast EthernetFast; varies according to
network trafficLong (100 m=328 ft.)Requires extra equipment
(switches).
Gigabit Ethernet (optional
accessory)Very fast; varies according
to network trafficLong (100 m=328 ft.)Requires extra equipment
(switches).
Jetdirect print server
(optional accessory)Moderate; varies according
to network trafficLong (100 m=328...

2.The front panel will display some information, including the printers IP address. Make a note of
the IP address (16.23.61.128 in this example).
3.Insert the Drivers and Documentation CD into your computer. If the CD does not autorun, run
the START.EXE program in the root folder of the CD.
4.Click the Install button.
5.Follow the instructions on your screen to set up the printer. The following notes will help you to
understand the screens and make appropriate choices.
●When asked how the printer is...

5.Follow the instructions on your screen to set up the printer. The following notes will help you to
understand the screens and make appropriate choices.
●When asked how the printer is connected, choose Connected via the network.
●The configuration program will look for printers connected to your network. When the
search has finished, a list of printers will be displayed. Identify your printer by its MAC
address and select it from the list.
●The configuration program will analyze the network and the...

Before you begin, make sure the following are true:
●The printer is set up and on.
●The Ethernet hub or router is on and functioning properly.
●All computers on the network are on and connected to the network.
●The printer is connected to the network.
Now you can proceed to install the printer driver and connect your printer:
1.Insert the Drivers and Documentation CD into your CD drive.
2.Open the CD icon on your desktop.
3.Open the OS X HP DJ 4000ps Install or the OS X HP DJ 4500ps Install icon,...

To connect your printer using AppleTalk:
1.
Go to the front panel and select the 
 icon, then I/O setup > Jetdirect EIO > View
configuration.
2.The front panel will display some information, including the printers AppleTalk name. Make a
note of the AppleTalk name.
3.Make sure that the AppleTalk protocol is active by double-clicking the System preference icon
on the Dock menu bar and selecting Network. Select Built-in Ethernet as well as AppleTalk
from the Show menu to confirm that AppleTalk is active....

Connect to a network (Mac OS 9) [4000]
NOTEThis topic applies to the HP Designjet 4000 Printer series only.
You can connect your printer to a network under Mac OS 9 using the following methods:
●TCP/IP
●AppleTalk
Using TCP/IP
Before you begin, make sure that your printer is switched on and connected to the network.
To connect your printer using TCP/IP:
1.
Go to the front panel and select the 
 icon.
2.The front panel will display some information, including the printers IP address. Make a note of
the IP...

3.Click the Adobe PostScript driver icon.
4.In the AppleTalk Zones list, select the AppleTalk zone where your printer is located (if it exists).
Make sure that the AppleTalk protocol is Active.
5.The Chooser will check all the printers that are connected by AppleTalk in your zone.
6.Select your printer. If you have several similar printers, you can identify the correct one by its
AppleTalk name.
7.Click the Create button in the Chooser to set up the printer.
8.The type of printer is selected...