HP DesignJet 110plus User Manual

DO NOT PRINT THIS PAGE!
Part number: C7796-90239
Languages: EFIGS
Size: A5
 
Paper: 80 g. recycling paper recommended, but we leave it up to each DC to use 
the most cost efficient paper according to their Paper strategy.
Color: B+W
Binding: Saddle stitch 
Pages: 132 + cover front and back.
Covers: 200 gr. recycling paper recommended, but we leave it up to ech DC to use 
the most cost efficient paper according to their Paper strategy. 
File: pdf format.
HP Designjet 110plus seriesQuick reference guide
DO...

QRG110plusnr.fm  Page 1  Wednesday, June 16, 2004  2:26 PM
 

1
How do I…?
How do I load sheets of paper? (general guidance) .................................2
How do I load paper using the front path? .............................................3
How do I unload paper from the front path? ...........................................3
How do I load paper into the input tray? ................................................4
How do I print on large sheets?.............................................................6
How do I load a roll of paper?...

HP Designjet 110plus/110 plus nr printer—Quick Reference Guide
2
There are three ways of loading sheets of paper into the printer:
The 
input tray  at the front of the printer for multiple sheets of paper between 
76×142mm (3×5.6inches) and 457×610 mm (18×24inches) (C+). 
You can load up to 50 sheets of paper of 0.2 mm thickness (or 150 g/m²) in 
the unextended tray, or 25 sheets of the same thickness in the extended tray. 
Envelopes can also be loaded in the input tray.
The  front path  for single...

HP Designjet 110plus/110 plus nr printer—Quick Reference Guide
3
1. Place a single sheet of paper in the output tray, aligning it on the right of the output tray, with the side that is to be printed on facing down.  Do not stack 
multiple sheets here.
2. Push the paper  as far as it will go into the printer, maintaining its alignment to 
the right.
3. Press the  OK key (the upper right key) on the front panel.
The printer will check the alignment of the paper, and if it is misaligned, it will eject 
the...

HP Designjet 110plus/110 plus nr printer—Quick Reference Guide
4
How do I load paper into the input tray?
Note that the input tray should be extended only when necessary: when using 
paper larger than Legal- or A4-size.
1. Remove the input tray.
2. Lift up the tray cover.
3. If the paper you are using is larger than Legal- or A4-size, move the small tab in the centre towards the left so that you can lengthen the tray. Then let go of 
the tab and pull the tray extension out as far as it will go.
4....

HP Designjet 110plus/110 plus nr printer—Quick Reference Guide
5
5. Slide the paper into the tray under the tray 
cover, ensuring that it touches the sides of the 
tray on the right and on the printer side.
6. Push in the small tab on the right of the tray so  that it fits snugly against the paper. Move the 
larger tab on the left of the tray to the right so 
that it too fits snugly against the paper.
7. Close the tray cover.
8. Lift up the output tray and insert the input tray  into the printer,...

HP Designjet 110plus/110 plus nr printer—Quick Reference Guide
6
How do I print on large sheets?
The printer output system has several adjustable components. When printing on 
large sheets of paper, it is important that you use the correct printer output 
configuration. The following diagram shows adjustable parts of the printer output 
system:
.
The table on the next page gives the output system configuration required for 
various paper sizes.
Note:
 When using the main tray or roll feedback as...

HP Designjet 110plus/110 plus nr printer—Quick Reference Guide
7
Source Destination Width Length1
23456
JIS B5 182mm 257mm
ANSI A 8.5 11 ISO A4 210mm 297mm
ARCH A 9 12
DIN C4 229mm 324mmISO B4 250mm 353mm
LEGAL 8.5 14 JIS B4 257mm 364mm
ISO A3 297mm 420mm
ANSI B 11 17
ARCH B 12 18
DIN C3 324mm 458mm
ANSI B+ 13 19
ISO B3 353mm 500mm
JIS B3 264mm 515mm
ANSI C 17 22 ISO A2 420mm 594mm
ARCH C 18 24 DIN C2 458mm 648mmISO B2 500mm 707mm
JIS B2 515mm 728mm
ISO A1 594mm 841mm
ANSI D 22 34
ARCH D 24 36
Custom Up...

HP Designjet 110plus/110 plus nr printer—Quick Reference Guide
8
Only one source of paper can be used by the printer at any one time, so if a roll 
of paper is loaded in the printer and you want to print to a sheet of paper, you 
must first unload the roll. The roll is au
tomatically reloaded the next time printing 
to the roll is requested.
You can cut a roll without unloading it by pressing the OK key (top right key on 
the front panel); the paper first advances about 1 cm or 0.4 inch.
1. Set your...