HP Cp-A52 Users Manual

							21
VIDEODOC.CAMERA
KEYSTONE
ASPECTSEARCH
BLANK
MUTE
MY BUTTON
POSITION
12
ESC ENTERMENURESET
COMPUTER
MY SOURCE/AUTO
MAGNIFYVOLUME
o
ONOFF
9×
FREEZE
      FOCUS                             D-ZOOM-           +           -            
+
VIDEODOC.CAMERA
KEYSTONE
ASPECTSEARCH
BLANK
MUTE
MY BUTTON
POSITION
12
ESC ENTERMENURESET
COMPUTER
MY SOURCE/AUTO
MAGNIFYVOLUME
o
ONOFF
9×
FREEZE
      FOCUS                             D-ZOOM-           +           -            
+
Operating
1.Press AUTO button on the remote control.  
Pressing this button performs the following.
Using the automatic adjustment feature
  For a computer signal   
The vertical position, the horizontal position and the horizontal 
phase will be automatically adjusted.   
Make sure that the application window is set to its maximum size 
prior to attempting to use this feature. A dark picture may still be 
incorrectly adjusted. Use a bright picture when adjusting.
   For a video signal and s-video signal  
The video format best suited for the respective input signal will be selected 
automatically. This function is available only when the AUTO is selected for the 
VIDEO FORMAT item in the INPUT menu (
34). The vertical position and horizontal 
position will be automatically set to the default.
●    The automatic adjustment operation requires approx. 10 seconds.  Also please note 
that it may not function correctly with some input. When this function is performed for 
a video signal, a certain extra such as a line may appear outside a picture.
●    The items adjusted by this function may vary when the FINE or DISABLE is selected 
for the AUTO ADJUST item of the SERVICE item in the OPTION menu (
47).
AUTO button
    For a component video signal   
The vertical position, horizontal position and horizontal phase will be automatically set 
to the default.
Adjusting the focus
Press the FOCUS + or FOCUS – button on the remote control, or 
FOCUS + or FOCUS – button on the projector (5) while no menu 
is on screen, to display the FOCUS box on screen.  Use the  FOCUS 
+ and FOCUS – buttons to adjust the screen focus.  After the focus 
adjustment, wait for a while until the FOCUS box is disappeared, if 
you want to display any other menu on screen by pushing the  MENU 
button on the projector.
●    The ◄/►/▲/▼ buttons on the projector work only as the cursor 
buttons while the template is displayed (
43). FOCUS + button
FOCUS – button 
						

							22
VIDEODOC.CAMERA
KEYSTONE
ASPECTSEARCH
BLANK
MUTE
MY BUTTON
POSITION
12
ESC ENTERMENURESET
COMPUTER
MY SOURCE/AUTO
MAGNIFYVOLUME
o
ONOFF
9×
FREEZE
      FOCUS                             D-ZOOM-           +           -            
+
Operating
KEYSTONE button
1.Press KEYSTONE button on the remote control. A dialog 
will appear on the screen to aid you in correcting the 
distortion.
Correcting the keystone distortions
2.Use the ▲/▼ cursor buttons to select, MANUAL or 
PERFECT FIT operation, and press the ► button to 
perform the following.
(1)  MANUAL displays a dialog for keystone correction.   
Use the ◄/► cursor buttons to select the direction 
to correct (
 or ) then use the ▲/▼ buttons for 
adjustment.
(2)   PERFECT FIT displays a dialog for the shape 
adjustment of the projected image in each of the 
corners.
1)   Choose the corner to adjust using the ▲/▼/◄/► 
buttons and press the ENTER or INPUT button.
2)   Use the ▲/▼/◄/► buttons to adjust the position of 
the corner.  
Press the ENTER or INPUT button to exit the 
adjustment of the corner.
3)    To adjust another corner, follow the same procedure 
from 1) above.  
To reset the adjustment of all the corners, select 
RESET using the ▲/▼ buttons and press the ENTER 
or INPUT button. 
●   While the positions of the corners are adjusted with PERFECT FIT, keystone 
adjustment feature is unavailable. To correct the keystone distortion, reset the 
adjustment of all the corners.
●    The adjustable range of this function will vary among inputs. For some input, this 
function may not work well.
●   When the zoom adjustment is set to the TELE (telephoto focus), this function may 
be excessive. This function should be used when the zoom adjustment is set to 
the full WIDE (wide-angle focus) whenever possible.
●    This function will be unavailable when Transition Detector is on (
53).
To close the dialog and complete this operation, press  KEYSTONE button again. 
Even if you do not do anything, the dialog will automatically disappear after a few 
seconds. 
						

							23
VIDEODOC.CAMERA
KEYSTONE
ASPECTSEARCH
BLANK
MUTE
MY BUTTON
POSITION
12
ESC ENTERMENURESET
COMPUTER
MY SOURCE/AUTO
MAGNIFYVOLUME
o
ONOFF
9×
FREEZE
      FOCUS                             D-ZOOM-           +           -            
+
VIDEODOC.CAMERA
KEYSTONE
ASPECTSEARCH
BLANK
MUTE
MY BUTTON
POSITION
12
ESC ENTERMENURESET
COMPUTER
MY SOURCE/AUTO
MAGNIFYVOLUME
o
ONOFF
9×
FREEZE
      FOCUS                             D-ZOOM-           +           -            
+
VIDEODOC.CAMERA
KEYSTONE
ASPECTSEARCH
BLANK
MUTE
MY BUTTON
POSITION
12
ESC ENTERMENURESET
COMPUTER
MY SOURCE/AUTO
MAGNIFYVOLUME
o
ONOFF
9×
FREEZE
      FOCUS                             D-ZOOM-           +           -            
+
• The zoom level can be finely adjusted. Closely watch the screen to find the 
level you want.NOTE
1.Press the ON button of MAGNIFY on the remote control.  
The “MAGNIFY” indication will appear on the screen and the 
projector will go into the MAGNIFY mode. When the ON button of 
MAGNIFY is pressed first after the projector is started, the picture will 
be zoomed twice. The indication will disappear in several seconds 
with no operation.
Using the magnify feature
2.Use the ▲/▼ cursor buttons to adjust the zoom level. To move 
the zoom area, press the POSITION  button in the MAGNIFY mode, then use the 
▲/▼/◄/► cursor buttons to move the area. And to finalize the zoom area, press the 
POSITION  button again. 
To exit from the MAGNIFY mode and restore the screen to normal, press the  OFF 
button of MAGNIFY on the remote control. 
●    The projector automatically exits from the MAGNIFY mode when the input signal is 
changed or when the display condition is changed. 
●   In the MAGNIFY mode, the keystone distortion condition may vary, it will be restored 
when the projector exits from the MAGNIFY mode.
MAGNIFY
ON/OFF  button
Operating
1.Press BLANK button on the remote control.  
The BLANK screen will be displayed instead of the screen of input 
signal. Please refer to BLANK item in SCREEN menu (
40).
To exit from the BLANK screen and return to the input signal screen, 
press BLANK button again. 
Temporarily blanking the screen
●    The projector automatically exits from the BLANK mode when some control buttons 
are pressed.
• The sound is not connected with the BLANK screen function.   
If necessary, set the volume or mute first.
• If you want to make the screen blank and the sound muted at the same time, use  AV 
Mute function that is required to be assigned to one of the MY BUTTON on the remote 
in advance (
46).
NOTE
1.Press the FREEZE button on the remote control.  
The “FREEZE” indication will appear on the screen (however, the 
indication will not appear when the TURN OFF is selected for the 
MESSAGE item in the SCREEN menu (
42)), and the projector will 
go into the FREEZE mode, which the picture is frozen.
To exit the FREEZE mode and restore the screen to normal, press 
the FREEZE button again. 
Freezing the screen
●    The projector automatically exits from the FREEZE mode when some control buttons 
are pressed.
●   If the projector continues projecting a still image for a long time, the LCD panel might 
possibly be burned in. Do not leave the projector in the FREEZE mode for too long. FREEZE button
BLANK button 
						

							24
VIDEODOC.CAMERA
KEYSTONEASPECTSEARCH
BLANK
MUTEMY BUTTON
POSITION
1 2
ESC ENTERMENU
RESET
COMPUTER
MY SOURCE/AUTOMAGNIFY
VOLUMEo
ON
OFF
9×
FREEZE
      FOCUS   
                          D-Z OOM-           +           -             +
VIDEODOC.CAMERA
KEYSTONE
ASPECT SEARCH
BLANK
MUTE
MY BUTTON
POSITION
1 2
ESC ENTERMENURESET
COMPUTER
MY SOURCE/
AUTO
MAGNIFYVOLUME
o
ONOFF
9×
FREEZE
      FOCUS                             D-ZOOM-           +           -            
+
COMPUTER OUT COMPUTER IN
2COMPUTER I
N1CONT ROLAUDI O
OU TS-VIDE OY          CB/PB     CR/PRVIDEO         L            RAUDIO IN 3 AUDIO IN1
2
LAMPTEMP POWER
ST ANDBY/ON
INPUTMENU
FOCUS  - + FOCUS
Operating
1.Press the MENU button on the remote control or the projector.  
The Advanced Menu or EASY MENU, which has priority just after powered 
on will appear. 
If you want to move the menu position, use the cursor buttons after pressing 
the POSITION button. While the projector is displaying any menu, the  MENU 
button on the projector works as the cursor buttons.
Using the menu function
2.If you want to change it to the Advanced Menu, 
select the Go to Advanced Menu...
This projector has the following menus: 
 
PICTURE, IMAGE, INPUT, SETUP, AUDIO, SCREEN, OPTION, C.C. and EASY 
MENU.  
EASY MENU consists of functions often used, and the other menus are classified 
into each purpose and brought together as the Advanced Menu.
Each of these menus is operated using the same methods. The basic operations 
of these menus are as follows.
In the EASY MENU
EASY MENU
3.Use the ▲/▼ cursor buttons to select an item to 
operate.
4.Use the ◄/► cursor buttons to operate the item.
MENU button
RESET button
ENTER button
MENU button
Cursor buttons
ESC button
(continued on next page) 
						

							25
Operating
Using the menu function (continued)●  Some functions cannot be performed when a certain input port is selected, or 
when a certain input signal is displayed.
●   When you want to reset the operation, press  RESET button on the remote 
control during the operation. Note that some items (ex. LANGUAGE, H 
PHASE, VOLUME) cannot be reset.
●   In the Advanced Menu, when you want to return to the previous display, press 
the ◄ cursor button or ESC button on the remote control.
5.Press MENU button on the remote control again to close the menu and 
complete this operation. Even if you do not do anything, the dialog will 
automatically disappear after about 10 seconds.
2.Use the ▲/▼ cursor buttons to select a menu. 
If you want to change it to the EASY MENU, select 
EASY MENU. 
Then press the ► cursor button, or ENTER button to 
select an item. The lower layer menu of the selected 
item will appear.
In the Advanced Menu
3.Use the ▲/▼ cursor buttons to select an item to operate. 
Then press the ► cursor button, or ENTER button to progress. The operation 
menu of the selected item will appear.
4.Use the ▲/▼ cursor buttons to operate the item.
Advanced Menu 
						

							26
EASY MENU
EASY MENU
From the EASY MENU, items shown in the table below 
can be performed. 
Select an item using the ▲/▼ cursor buttons. Then 
perform it according to the following table. 
ItemDescription
ASPECT Using the ◄/► buttons switches the mode for aspect ratio. 
See the ASPECT item in IMAGE menu
 (31).
D-ZOOM Using the ◄/► buttons adjusts the zoom.
See the D-ZOOM item in SETUP menu (
36).
KEYSTONE 
Using the ◄/► buttons corrects the vertical keystone distortion.
See KEYSTONE  item in SETUP menu ( 36).
KEYSTONE 
Using the ◄/► buttons corrects the horizontal keystone distortion.
See the KEYSTONE  item in SETUP menu ( 36).
PERFECT FIT Using the ► button displays the dialog for the shape adjustment of 
the projected image in each of the corners.
See the PERFECT FIT item in SETUP menu
 (
37).
 PICTURE MODE Using the ◄/► buttons switches the picture mode. 
The picture modes are combinations of GAMMA and COLOR 
TEMP settings. Choose a suitable mode according to the projected 
source.
         NORMAL 
ó CINEMA 
ó DYNAMIC 
ó BOARD(BLACK)
      DAYTIME  ó WHITEBOARD 
ó BOARD(GREEN) 
COLOR TEMP
GAMMA
NORMAL #2 MID DEFAULT #1 DEFAULT
CINEMA #3 LOW DEFAULT #2 DEFAULT
DYNAMIC #1 HIGH DEFAULT #3 DEFAULT
BOARD(BLACK) #4 Hi-BRIGHT-1 DEFAULT #4 DEFAULT
BOARD(GREEN) #5 Hi-BRIGHT-2 DEFAULT #4 DEFAULT
WHITEBOARD #2 MID DEFAULT #5 DEFAULT
DAYTIME #6 Hi-BRIGHT-3 DEFAULT #6 DEFAULT
• When the combination of GAMMA and COLOR TEMP differs 
from pre-assigned modes above, the display on the menu for the 
PICTURE MODE is “CUSTOM”. Please refer to GAMMA (
28) and 
COLOR TEMP ( 29) items in PICTURE menu.
• When this function is performed, a certain extra such as a line 
may appear.
(continued on next page) 
						

							27
EASY MENU
EASY MENU (continued)
ItemDescription
BRIGHTNESS Using the ◄/► buttons adjusts the brightness.
See BRIGHTNESS item in PICTURE menu
 (
28).
CONTRAST
Using the ◄/► buttons adjusts the contrast.
See CONTRAST item in PICTURE menu
 ( 28).
COLOR Using the ◄/► buttons adjusts the strength of whole color.
See COLOR item in PICTURE menu
 (
29).
TINT Using the ◄/► buttons adjusts the tint.
See TINT item in PICTURE menu
 (
29).
SHARPNESS
Using the ◄/► buttons adjusts the sharpness.
See SHARPNESS item in PICTURE menu
 ( 30).
WHISPER Using the ◄/► buttons turns off/on the whisper mode.
See WHISPER item in SETUP menu
 (
37).
MIRROR Using the ◄/► buttons switches the mode for mirror status.
See MIRROR item in SETUP menu
 (
37).
RESET Performing this item resets all of EASY MENU items except FILTER 
TIME and LANGUAGE.
Pressing the RESET button or the ► button displays a dialog. To 
reset, select RESET using the ▲ button performs resetting.
FILTER TIME The usage time of the air-filter is shown in the menu.
Performing this item resets the filter time which counts usage time 
of the air-filter.
Pressing the RESET button or the ► button displays a dialog. To 
reset the filter time, select RESET using the ▲ button performs 
resetting.
See FILTER TIME item in OPTION menu
 (
45).
LANGUAGE
Using the ◄/► buttons changes the display language. 
See LANGUAGE item in SCREEN menu
 ( 40).
Go to
Advanced Menu...Select  “
Go to Advanced Menu… ”
 on the menu, and press the ► 
or ENTER button to use the menu of PICTURE, IMAGE, INPUT, 
SETUP, AUDIO, SCREEN, OPTION or C.C.. 
						

							28
PICTURE menu
PICTURE menu
From the PICTURE menu, items shown in the table below 
can be performed. 
Select an item using the ▲/▼ cursor buttons, and press 
the ► cursor button or ENTER button to execute the item. 
Then perform it according to the following table.
ItemDescription
BRIGHTNESS Using the ▲/▼ buttons adjusts the brightness.
Light  ó Dark
CONTRAST Using the ▲/▼ buttons adjusts the contrast.
Strong  ó Weak
GAMMA Using the ▲/▼ buttons switches the gamma mode.
To adjust CUSTOM
Selecting a mode whose name includes 
CUSTOM and then pressing the ► button 
or the ENTER button displays a dialog to 
aid you in adjusting the mode.  
This function is useful when you want to 
change the brightness of particular tones.
Choose an item using the ◄/► buttons, and   
adjust the level using the ▲/▼ buttons. 
You can display a test pattern for checking the effect of your 
adjustment by pressing the ENTER button. 
Each time you press the ENTER button, the pattern changes as below.
  No pattern  ð Gray scale of 9 steps 
                 Ramp   Gray scale of 15 steps
The eight equalizing bars correspond to eight tone levels of the test 
pattern  (Gray  scale  of  9  steps),  except  the  darkest  in  the  left  end. 
If  you  want  to  adjust  the  2nd  tone  from  left  end  on  the  test  pattern 
use  the  equalizing  adjustment  bar  “1”.  The  darkest  tone  at  the  left 
end  of  the  test  pattern  cannot  be  controlled  with  any  of  equalizing 
adjustment bar.
• 
When this function is performed, lines or other distortion may appear.
#1 DEFAULT  � #1 CUSTOM 
� #2 DEFAULT 
� #2 CUSTOM 
�
#3 DEFAULT�
#3 CUSTOM�#5 CUSTOM  �  #5 DEFAULT 
�  #4 CUSTOM 
�  #4 DEFAULT  
�
#6 
CUSTOM�
#6 DEFAULT�
(continued on next page) 
						

							29
PICTURE menu
PICTURE menu (continued)
ItemDescription
COLOR TEMP Using the ▲/▼ buttons switches the color temperature mode.
To adjust CUSTOM
Selecting a mode whose name includes 
CUSTOM and then pressing the ► button or the 
ENTER button displays a dialog to aid you in 
adjusting the OFFSET and GAIN of the selected 
mode.
OFFSET adjustments change the color intensity 
on the whole tones of the test pattern.
GAIN adjustments mainly affect color intensity 
on the brighter tones of the test pattern.
Choose an item using the ◄/► buttons, and adjust the level using 
the ▲/▼ buttons. 
You can display a test pattern for checking the effect of your 
adjustment by pressing the  ENTER button.  
Each time you press the ENTER button, the pattern changes as 
below.
  No pattern  ð Gray scale of 9 steps 
                 Ramp   Gray scale of 15 steps
• When this function is performed, lines or other distortion may 
appear.
COLOR Using the ▲/▼ buttons adjusts the strength of whole color.
Strong  ó Weak
• This item can be selected only for a video signal, s-video, or 
component video signal.
TINT Using the ▲/▼ buttons adjusts the tint.
Greenish  ó Reddish
• This item can be selected only for a video signal, s-video, or 
component video signal.
�
#2 MID CUSTOM
�
#3 LOW DEFAULT
�
#3 LOW CUSTOM
�
#1 HIGH DEFAULT 
� #1 HIGH CUSTOM 
� #2 MID DEFAULT
�
#6 Hi-BRIGHT-3 CUSTOM
�
#6 Hi-BRIGHT-3 DEFAULT
�
#5 Hi-BRIGHT-2 CUSTOM
� 
#5 Hi-BRIGHT-2 DEFAULT 
�  #4 Hi-BRIGHT-1 CUSTOM 
�  #4 Hi-BRIGHT-1 DEFAULT  
(continued on next page) 
						

							30
PICTURE menu
PICTURE menu (continued)
ItemDescription
SHARPNESS Using the ▲/▼ buttons adjusts the sharpness.
Strong  ó Weak
•  There may be some noise and/or the screen may flicker for a 
moment when an adjustment is made. This is not a malfunction.
MY MEMORY
This projector has 4 memories for adjustment data (for all the items 
of PICTURE menu).
Selecting a function using the ▲/▼ buttons and pressing the ► or 
ENTER button performs each function. LOAD-1 ó LOAD-2 
ó LOAD-3 
ó LOAD-4
SAVE-4  óSAVE-3 
ó SAVE-2 
ó SAVE-1
LOAD-1, LOAD-2, LOAD-3, LOAD-4
Performing a LOAD function loads the data from the memory linked 
in the number included in the function’s name, and adjusts the 
picture automatically depending on the data. 
• The LOAD functions whose linked memory has no data are 
skipped.
• Remember that the current adjusted condition will be lost by 
loading data. If you want to keep the current adjustment, please 
save it before performing a LOAD function.
• There may be some noise and the screen may flicker for a 
moment when loading data. This is not malfunction.
• You can perform the LOAD function using MY BUTTONs. Please 
see MY BUTTON item in OPTION menu (
 46).
SAVE-1, SAVE-2, SAVE-3, SAVE-4
Performing a SAVE function saves the current adjustment data into 
the memory linked in the number included in the function’s name. 
• Remember that the current data being stored of a memory will be 
lost by saving a new data into the memory.