HP Compaq S1922 User Guide

ENWWInstalling the Monitor 5
3. Press the base into the column until it locks in position. 
Figure 3-2   Attaching the Base
4. Lift the monitor to an upright position and place on a flat, stable surface. 
Figure 3-3   Monitor in upright position
 
 
Preparing the monitor for wall-mounting 
1. Check the stability of  the wall-mounting fixture.
  WARNING!  To reduce the risk of personal injury or of damage to the equipment, 
check that the wall-mounting fixture is adequately installed and secured before...

6 Chapter 3.   Setting Up the MonitorENWW 
 
5. Slide the base away from the bottom of the monitor. 
Figure 3-5   Sliding the base away from the monitor
6. Remove the screws on the back of monitor. 
Figure 3-6   Removing the screws from the back of the monitor
7. Four threaded holes are exposed. These holes are for screws to attach the swing 
arm or other mounting fixture to the back of the monitor. 
8. Follow the instructions included with t he mounting fixture to ensure that the 
monitor is safely...

ENWWConnecting Monitor Cables 7
Connecting Monitor Cables
Connecting the VGA (Analog) Cable or DVI-D (Digital) Cable
Use a VGA video cable or a DVI-D cable to connect your monitor to your computer. To 
use DVI, you must have a DVI-compliant graphic card. Connectors are located on the 
back of the monitor. Be sure the computer and monitor are turned off and unplugged.
1. To connect the VGA cable 
Connect one end of the VGA video cable to the back of the monitor and the other end 
to the VGA video...

8 Chapter 3.   Setting Up the MonitorENWW 
 
High-Bandwidth Digital Content Protection (HDCP) 
(Available on Select Models)
Your monitor supports HDCP and can receive high-definition content. High-definition 
content is available in many sources, such as Blue-ray Disc devices or HDTV air or 
cable broadcasts. If you do not have an HDCP-enabled monitor, you will see a blank 
screen or a lower resolution picture when  playing high-definition protected content. 
Your computer graphics card and monitor must...

ENWWAdjusting the Tilt 9
Adjusting the Tilt
For optimal viewing, adjust the screen tilt to your own preference, as follows:
1. Face the front of the monitor and hold the base so that you do not topple the  monitor while changing the tilt.
2. Adjust the tilt by moving the top edge of  the monitor either toward or away from 
you, without touching the screen.
Figure 3-10 Tilt adjustment
 

ENWWCD Software and Utilities 10
4. Operating the Monitor
CD Software and Utilities
The CD that is included with this monitor contains drivers and software that you can 
install on your computer.
Installing Drivers
If you determine that you need to update the dr ivers, you can install the monitor driver 
INF and ICM files from the CD, or  download them from the Internet.
Installing the monitor driver software from the CD
To install the monitor driver software from the CD:
1. Insert the CD in your...

11 Appendix 4.   Operating the Monitor ENWW
 
Front-Panel Controls
 The monitor buttons are located on the bottom of the front panel
Figure 4-1 Front-panel control buttons
No. Icon Description
1PowerTurns the monitor on or puts it in standby or sleep mode. The Power 
button is located on the bottom or fr ont of the monitor depending on the 
model.
2Menu Opens, selects, or exits the OSD menu.
3+ Navigates forward through the OS D menu and increases adjustment 
levels.
4- Navigates backward through the...

ENWWUsing the On-Screen Display (OSD) 12
Using the On-Screen Display (OSD)
Main
Menu Item Main
Menu Icon 1st Sub
Menu Item 2nd Sub
Menu Item Description Adjust 
Range Reset Value
Luminance Contrast N/A Contrast from Digital-register. Each step will increase/
decrease value by 10-100 Recall Warm 
Contrast Value
Brightness N/A Backlight Adjustment Each step will increase/
decrease value by 1 0-100 Recall Warm 
Brightness Value
Eco Mode N/A Picture Adjustment, Brightness = 90,
Contrast = 50.
Brightness,...

13 Appendix 4.   Operating the Monitor ENWW
 
Main
Menu Item Main
Menu Icon 1st Sub
Menu Item 2nd Sub
Menu Item Description Adjust 
Range Reset Value
Image  Setup Clock N/A Adjust picture Clock to reduce 
Vertical-Line noise.
Each step will increase/
decrease value by 1 0-100 Do Auto 
Configure
Phase N/A Adjust Picture Phase to  reduce Horizontal-Line noise. 0-100 Do Auto 
Configure
H. Position N/A Adjust the horizontal position  of the picture. 0-100 Do Auto 
Configure
V. Position N/A Adjust the...

ENWWUsing the On-Screen Display (OSD) 14
Main
Menu Item Main
Menu Icon Sub
Menu Item Description Adjust 
Range Reset Value
Color Temp. Warm Recall Warm Color  Temperature.N/A The Color 
Temperature will 
be set to Warm.
The User R/G/B 
value (default is 
50) will can be 
Modified by Reset 
function in user 
mode.
Normal Recall Normal Color 
Temperature. N/A
Cool Recall Cool Color  Temperature. N/A
sRGB
(for select 
models with 
sRGB 
function) Recall sRGB Color 
Temperature.
N/A
Red Red Gain from...