HP Compaq Cq1859s User Guide

IconMain MenuSubmenuDescription
Clock PhaseAdjusts the focus of the display. This adjustment
allows you to remove any horizontal noise and clear or
sharpen the image of characters.
Horizontal PositionAdjusts the position of the screen image left and right.
Vertical PositionAdjusts the position of the screen image up and down.
Custom ScalingSelects the method on how displayed information on
the monitor will be formatted. Select:
●Fill to Screen - image fills the entire screen and
may look distorted or...

IconMain MenuSubmenuDescription
Mode DisplayDisplays the resolution, refresh rate and frequency
information on the screen each time the OSD Main
Menu is accessed. Select:
●On
● Off
The factory default is On.
Monitor StatusDisplays the operating status of the monitor each time
the monitor is powered on. Select the location to
display the status to:
● Top
● Middle
● Bottom
● Off
The factory default is Top.
DDC/CI SupportAllows the computer to control some OSD menu
features such as brightness, contrast and...

IconMain MenuSubmenuDescription
Recommended
SettingsProvides the recommended resolution mode and
refresh rate for the monitor.
Serial NumberReports the serial number of the monitor. The serial
number is needed if contacting HP technical support.
FW VersionReports the firmware version of the monitor.
Backlight HoursReports the total hours of backlight operation.
  Service Supporthttp://www.hp.com/support
Factory ResetReturns all OSD menu settings and DDC/CI controls
to the factory default settings,...

●No Source Signal
—Indicates the monitor is not receiving a video signal from the PC on the monitor
video input connector. Check to determine if the PC  or input signal source is off or in the power
saving mode.
● Auto Adjustment in Progress
—Indicates the auto-adjustment function is active.
● Monitor Going to Sleep
—Indicates the screen display is entering a sleep mode.
● Check Video Cable
—Indicates the video cable is not pr operly connected to the computer.
● Dynamic Contrast Ratio On
—Indicates that...

7.Press the  OK button again to enter the time for minutes.
8. Press the  - (Minus) or  + (Plus) button to adjust the minutes.
9. Press the  OK button to lock in the time chosen.
10. After setting the current time, the highlight automatically skips to  Set Sleep Time. Repeat steps 6
through 9 to set  Sleep Time.
11. If you do not want to set  Sleep Time, press the OK button twice, then select  Save and Return to
exit the menu.
12. After setting  Sleep Time, the highlight automatically skips to  Set On...

5.To activate a color profile for th e monitor, you must set it as the Default Monitor Profile. Select
sRGB Color Space Profile , then click Set as Default  button.
6. Click  Apply  or OK .
Installing the sRGB ICM File  for Microsoft Windows Vista
1.Click  Appearance and Personalization  icon in the Control Panel.
2. Click  Personalization .
3. Click  Display Settings .
4. Click the  Advanced Settings  button.
5. Click the  Color Management  tab, then click the Color Management  button.
6. Click the...

A Troubleshooting
Solving Common Problems
The following table lists possible problems, the possible cause of each problem, and the recommended
solutions.
ProblemPossible CauseSolution
Screen is blank.Power cord is disconnected.Connect the power cord.
Power button on side panel of
the monitor is turned off.Press the side panel power button.
Video cable is improperly
connected.Connect the video cable properly. Refer to Chapter
3, 
Setting Up the Monitor on page 4  for more
information.
Screen blanking is...

Online Technical Support
For the online access to technical support information, self-solve tools, online assistance, community
forums of IT experts, broad mu tlivendor knowledge base, monitoring and diagnostic tools, go to
http://www.hp.com/support
Preparing to Call Technical Support
If you cannot solve a problem using the troubleshooting ti ps in this section, you may need to call technical
support. Have the following information available when you call:
● Monitor model number
● Monitor serial number...

B Technical Specifications
NOTE:All performance specifications are provided  by the component manufacturers. Performance
specifications represent the highest specification of  all HPs component manufacturers typical level
specifications for performance and actual performance may vary either higher or lower.
CQ1859, CQ1859e, and CQ1859s Models
Table B-1   Specifications
Display
Type47 cm wide screen
TFT LCD18.5 inches wide screen
Viewable Image Size47 cm diagonal18.5 inch diagonal
Speakers1 watt per...

Altitude:
Operating
Storage
0 to 3657.6 m
0 to 12192 m0 to 12,000 feet
0 to 40,000 feet
Power Consumption (maximum)30 watts 
Input Terminal One VGA connector with cable included  
Recognizing Preset Display Resolutions
The display resolutions listed below are the most commonly used modes and are set as factory defaults.
This monitor automatically recognizes these preset modes and they will appear properly sized and
centered on the screen.
CQ1859, CQ1859e, and CQ1859s Models
Table B-2   Factory Preset...