HP Color LaserJet CP6015x User Manual

8 Use product features
●Economy settings
●
Use the stapler
●
Use job storage features
●
Banner printing
●
Print photos or marketing material
●
Print weatherproof maps and outdoor signs
●
Set the duplex alignment
ENWW107
 

Economy settings
You can adjust economy settings from the control panel or from the embedded Web server (EWS).
Sleep delay
The adjustable sleep mode feature reduces power consumption when the product has been inactive for
an extended period. You can set the length of time before the product enters sleep mode to
1 MINUTE, 15 MINUTES, 30 MINUTES, 45 MINUTES, 60 MINUTES, 90 MINUTES, 2 HOURS, or
4 HOURS. The default setting is 60 MINUTES.
NOTE:The product display dims when the product is in sleep mode. This...

Set the wake time
1.Press Menu.
2.Press the down arrow 
 to highlight CONFIGURE DEVICE, and then press the checkmark button
.
3.Press the down arrow 
 to highlight SYSTEM SETUP, and then press the checkmark button .
4.Press the down arrow 
 to highlight WAKE TIME, and then press the checkmark button .
5.Press the up arrow or down arrow 
/ to select the day of the week, and then press the checkmark
button 
.
6.Press the down arrow 
 to select CUSTOM, and then press the checkmark button .
7.Press the up...

Use the stapler
The automatic stapler is only available with the optional HP 3-bin Stapler/Stacker or HP booklet Maker/
Finisher Accessory.
Print jobs can be stapled with a diagonal staple in either top corner, with two horizontal staples at the
top of the page, or with two vertical staples at either side of the page.
●Paper weight can range from 60 to 220 g/m
2 (16 to 148 lbs.). Heavier paper might have a stapling
limit of fewer than 50 sheets.
●The optional stapler/stacker can staple jobs of up to 50...

A4
LT RA4
LT R
A4
LT R
A4 R, LTR R A4 R, LTR R
LGL, B4 LGL, B4
A3, 11x17 LGL, A3, 11x17, B4
A3, 11x17
If the correct paper size or orientation is not used, the print job will print, but it will not be stapled.
ENWWUse the stapler 111
 

Staple print jobs
Select the stapler in the printer driver for printed jobs (Windows)
1.Select Print from the File menu of your software program.
2.Select the HP Color LaserJet CP6015 Series printer, and then click Properties or Printing
Preferences.
3.From the Staple drop-down list, select a staple option.
4.Click OK to save the settings and OK to print.
NOTE:You can create a Shortcut with the appropriate settings.
Select the stapler in the printer driver for printed jobs (Macintosh)
Select the stapler...

Use job storage features
The following job-storage features are available for print jobs:
●Proof and hold jobs: This feature provides a quick and easy way to print and proof one copy of
a job and then print the additional copies.
●Personal jobs: When you send a private job to the product, the job does not print until you provide
the required personal identification number (PIN) at the control panel.
●Quick Copy jobs: You can print the requested number of copies of a job and then store a copy of
the job...

Print a proof and hold job
1.Press Menu.
2.Press the down arrow 
 to highlight RETRIEVE JOB, and then press the checkmark button .
3.Press the down arrow 
 to highlight your USER NAME, and then press the checkmark button
.
4.Press the down arrow 
 to highlight a JOB NAME, and then press the checkmark button .
PRINT is highlighted.
5.Press the checkmark button 
 to select PRINT.
6.Press the up arrow or down arrow 
  to select the number of copies.
7.Press the checkmark button 
 to print the job.
Delete a...

Use the personal job feature
Use the personal job feature to specify that a job is not printed until you release it. Your job will be stored
on the product and nothing will be printed until you request the job from the products control panel.
Once the job is printed, it will be automatically removed from the products job storage. Personal jobs
can be stored with or without a 4-digit personal identification number (PIN). To make the job private, a
PIN must be used. 
For information on creating a personal...

Use the Quick Copy feature
The Quick Copy feature prints the requested number of copies of a job and stores a copy on the product
hard disk. Additional copies of the job can be printed later. This feature can be turned off in the printer
driver.
The default number of different Quick Copy jobs that can be stored on the product is 32. At the control
panel, you can set a different default number. See 
Use the control panel on page 12.
Create a QuickCopy job
CAUTION:If the device needs additional space to...