HP Color LaserJet CP6015de User Manual

ItemSub-itemValuesDescription
●NORMAL
 is the default trapping setting.
Trapping is at a medium level and adaptive
halftoning is on.
● MAXIMUM
 is the most aggressive trapping
setting. Adaptive halftoning is on.
PROCESS CLEANING
PAGE  
 Allows you to create and process a cleaning page
for cleaning excess toner off the pressure roller in
the fuser. When the cleaning process runs, a blank
page is printed. This page can be discarded.
System setup menu
Use the SYSTEM SETUP menu to change product-...

ItemSub-itemValuesDescription
RESTRICT COLOR USE ENABLE COLOR
COLOR IF ALLOWED
DISABLE COLORDisables or restricts color use. The
default is ENABLE COLOR . To
use the  COLOR IF ALLOWED
setting, set up user permissions
through the embedded Web
server, HP Easy Printer Care, or
Web Jetadmin. See 
Supportedutilities for Windows on page 57 .
COLOR/BLACK MIX AUTO
MOSTLY COLOR PAGES
MOSTLY BLACK PAGESThis menu item establishes how
the product switches from color to
monochrome (black and white)
mode for maximum...

ItemSub-itemValuesDescription
multipurpose tray instead. Two
options are available:
●ALWAYS
: A prompt always
appears before using the
multipurpose tray. This is the
factory default setting.
● UNLESS LOADED
: A
message appears only if the
multipurpose tray is empty.
 PS DEFER MEDIAENABLE
DISABLEDThis option affects how paper is
handled when printing from an
Adobe PS print driver.
● ENABLED
 uses HP’s paper
handling model.
● DISABLED
 uses the Adobe
PS paper handling model.
 SIZE/TYPE PROMPTDISPLAY
DO NOT...

ItemSub-itemValuesDescription
(duplexing). Two options are
available:
●AUTO
 enables Smart
Duplexing, which instructs
the device not to process both
sides if the second side is
blank. This can improve print
speed.
● YES disables Smart
Duplexing and forces the
duplexer to flip the sheet of
paper even if it is printed on
only one side. This might be
preferable for certain jobs that
use paper types such as
letterhead or prepunched
paper.
 IMAGE ROTATIONLEFT TO RIGHT
RIGHT TO LEFT
ALTERNATEThis option allows...

ItemSub-itemValuesDescription
causes minimal impact to the first-
page-out time.
If SAVE MOST ENERGY  is
selected, power to the fuser is
turned off after each job. This
causes the most impact to the first-
page-out time.
DISPLAY BRIGHTNESS Range is 1 through 10.Sets the brightness of the control
panel display. The default is  5.
PERSONALITY AUTO
PCL
PDF
PSSets the default personality to
automatic switching, PCL, PDF, or
PS modes. The default is  AUTO.
CLEARABLE WARNINGS JOB
ONSets whether a warning is...

ItemSub-itemValuesDescription
CAUTION:Using an Override
option may result in unsatisfactory
print quality and unavailability of
certain features (such as toner
remaining information).
CAUTION: All print defects or
supply failures incurred when an
HP supply is used in Override
mode are not considered defects in
materials or workmanship under
the HP Print Cartridge and Image
Drum Limited Warranty Statement.
For Warranty information, see 
Print
cartridge and image drum limited
warranty statement on page...

ItemSub-itemValuesDescription
printing with black toner only. The
default is STOP.
JAM RECOVERY AUTO
OFF
ONSets whether the product will
attempt to reprint pages after a
jam. The default is AUTO .
LANGUAGE   A listing of available languages
appears. Sets the default language. The
default language is 
ENGLISH.
Output Setup menu
This menu and associated sub-items displays only wh en an optional output accessory is attached to
the product.
To display:  Press Menu , select CONFIGURE DEVICE , and then select...

ItemSub-itemValuesDescription
each copy separate from the
others.
 A4/LETTER STAPLENORMAL
ALTERNATE 1
ALTERNATE 2Controls the speed of the print
engine to prevent paper jams by
using the stapler buffer.
With the NORMAL , the engine
speed is normal, and the stapler
buffer is used.
If the  ALTERNATE 1  setting is
enabled, and the engine is in
Autosense Mode, the engine
slows down to prevent jams. If the
product is NOT in Autosense
Mode, the engine performs at
normal speed, using the stapler
buffer.
If the...

ItemSub-itemValuesDescription
–2.5 mm
–2.0 mm
–1.5 mm
–1.0 mm
–0.5 mm
0.0 mm
0.5 mm
1.0 mm
1.5 mm
2.0 mm
2.5 mm
3.0 mm
3.5 mm
4.0 mm
 FOLD 11X17 & A3 –4.0 mm
–3.5 mm
–3.0 mm
–2.5 mm
–2.0 mm
–1.5 mm
–1.0 mm
–0.5 mm
0.0 mm
0.5 mm
1.0 mm
1.5 mm
2.0 mm
2.5 mm
3.0 mm
3.5 mm
4.0 mm Adjusts the fold line for Legal and
11x17 and A3 size paper (booklet
maker only).
ENWW
Configure device menu 35
 

I/O menu
Items on the I/O (input/output) menu affect the communication between the product and the computer.
If the product contains an HP Jetd irect print server, you can configure basic networking parameters by
using this submenu. You can also configure these  and other parameters through HP Web Jetadmin or
the embedded Web server.
For more information on these options, see 
Configure network settings on page 78 .
To display:  Press Menu , select CONFIGURE DEVICE , and then select I/O....