HP Color LaserJet CP3505n User Manual

Color LaserJet Image Fuser Kit and Image Transfer Kit
Limited Warranty Statement
This HP product is warranted to be free from defects in materials and workmanship until the printer
provides a low-life indicator on the control panel.
This warranty does not apply to products that (a) have been refurbished, remanufactured or tampered
with in any way, (b) experience problems resulting from misuse, improper storage, or operation outside
of the published environmental specifications for the printer product or...

Customer support
Get telephone support, free during your warranty period, for
your country/region
Have the product name, serial number, date of purchase, and
problem description ready.Country/region phone numbers are on the flyer that was in the
box with your product or at www.hp.com/support/.
Get 24-hour Internet supporthttp://www.hp.com/support/cljcp3505
Get support for products used with a Macintosh computerwww.hp.com/go/macosx
Download software utilities, drivers, and electronic...

HP maintenance agreements
HP has several types of maintenance agreements that meet a wide range of support needs.
Maintenance agreements are not part of the standard warranty. Support services may vary by area.
Check with your local HP dealer to determine the services available to you.
On-site service agreements
To provide you with the level of support best suited to your needs, HP has on-site service agreements
with a selection of response times.
Next-day on-site service
This agreement provides support...

Repack the printer
If your printer needs to be moved or shipped to another location, perform the following procedure to
repack the printer.
CAUTION:Shipping damage as a result of inadequate packing is the customers responsibility. The
printer must remain upright during shipment.
Repack the printer
CAUTION:It is extremely important to remove the print cartridges before shipping the printer. Print
cartridges left in the printer during shipping will leak and entirely cover the printer engine and other...

C Printer specifications
The printer specifications provide information about the size and weight, amount of power needed and
used, and noise output of the printer. The specifications also describe how the different operating modes
affect power consumption, heat output, and noise output.
Physical specifications
Table C-1  Physical dimensions for the HP Color LaserJet CP3505 printers
ProductHeightDepthWidthWeight1
Base model400 mm (15.7 in)450 mm (17.7 in)400 mm (15.7 in)
20.3 kg
(44.8 lbs)
Base model...

Electrical specifications
WARNING!Power requirements are based on the country/region where the printer is sold. Do not
convert operating voltages. This may damage the printer and void the product warranty.
Table C-2  Electrical specifications for the HP Color LaserJet CP3505 printers
Item110-volt models220-volt models
Power requirements100 to 127 V (+/-10%)
50 to 60 Hz (+/-2 Hz)220 to 240 V (+/-10%)
50 to 60 Hz (+/-2 Hz)
Minimum recommended circuit capacity 6.5 A 3.5 A
194 Appendix C   Printer...

Power-consumption specifications
Table C-3  Power consumption (average, in watts)1
Product ModelPrinting2Ready3Sleep4OffHeat output-
Ready (BTU/
hour)
5
HP Color LaserJet CP350543748150.5162
HP Color LaserJet
CP3505n43748150.5162
HP Color LaserJet
CP3505dn43748150.5162
HP Color LaserJet
CP3505x 407 46 15 0.7 162
1The power consumption reflects the highest values meas
ured for color and monochrome printing when using standard
voltages.
2Printing speed is 20 ppm for letter-size media and 21 ppm for...

Acoustic specifications
Table C-4  Acoustic emissions for theHP Color LaserJet CP3505 printers
Sound power levelDeclared per ISO 9296
Printing (20 ppm)1LWAd = 6.4 Bels (A) [64 dB (A)]
ReadyLWAd = 5.4 Bels (A) [54 dB (A)]
Sound pressure level: bystander positionDeclared per ISO 9296
Printing (20 ppm)1LpAm = 50 dB (A)
Ready LpAm = 40 dB (A)
1The printing speed is 20 ppm for letter-size media and 21 ppm for A4-size media.
NOTE:These values are subject to change.
196 Appendix C   Printer specifications ENWW
 

Operating-environment specifications
Table C-5  Operating environment specifications
EnvironmentRecommendedAllowed
Temperature17 to 25° C (62.6 to 77° F)10 to 27° C (50 to 81° F)
Humidity20 to 60% relative humidity (RH)10 to 70% RH
Altitude Not applicable 0 to 2600 m (0 to 8530 ft)
NOTE:These values are subject to change.
ENWW Operating-environment specifications 197
 

198 Appendix C   Printer specifications ENWW