HP Color LaserJet CP2025x User Manual

System setup menu
Use this menu to establish basic product settings. The System setup menu has several sub-menus.
Each is described in the following table.
Menu itemSub-menu itemSub-menu itemDescription
Language  Select the language for the control-panel
display messages and the product
reports.
Paper setupDef. paper sizeLetter
A4
LegalSelect the size for printing internal
reports or any print job that does not
specify a size.
 Def. paper typeA list of available media
types appears.Select the media type...

Menu itemSub-menu itemSub-menu itemDescription
 Calibrate colorAfter power on
Calibrate nowAfter power on: Select how soon the
product should calibrate after you turn it
on. The default setting is 15 minutes.
Calibrate now: Makes the product
perform a calibration immediately. If a job
is processing, the product calibrates after
the job is complete. If an error message
is displayed, you must clear the error
first.
 Cartridge low(1-20)The percentage threshold determines
when the product begins reporting...

Menu itemSub-menu itemSub-menu itemDescription
Lighter
Medium
Darker
Darkest
ENWWControl-panel menus 13
 

Service menu
Use this menu to restore default settings, clean the product, and activate special modes that affect print
output.
Menu itemSub-menu itemDescription
Cleaning mode Use this option to clean the product if you see toner specks or
other marks on the printed output. The cleaning process
removes dust and excess toner from the paper path.
When you select this item, the product prompts you to load
plain paper in tray 1 and then press OK to start the cleaning
process. Wait until the process is...

Network config. menu
Use this menu to establish network configuration settings.
Menu itemSub-menu itemDescription
TCP/IP configAutomatic
ManualSelect Automatic to automatically configure all the
TCP/IP settings.
Select Manual to manually configure the IP address,
subnet mask, and default gateway.
The default setting is Automatic.
Auto crossoverOn
OffThis item is used when you are connecting the
product directly to a personal computer using an
Ethernet cable (you might have to set this to On or
Off...

16 Chapter 2   Control panelENWW
 

3 Software for Windows
●Supported operating systems for Windows
●
Supported printer drivers for Windows
●
HP Universal Print Driver (UPD)
●
Select the correct printer driver for Windows
●
Priority for print settings
●
Change printer-driver settings for Windows
●
Install the Windows software
●
Supported utilities
ENWW17
 

Supported operating systems for Windows
The product supports the following Windows operating systems:
●Windows XP (32-bit and 64-bit)
●Windows Server 2003 (32-bit and 64-bit)
●Windows 2000
●Windows Vista
18 Chapter 3   Software for Windows ENWW
 

Supported printer drivers for Windows
●PCL 6
●HP postscript level 3 emulation
The printer drivers include online Help that has instructions for common printing tasks and also describes
the buttons, checkboxes, and drop-down lists that are in the printer driver.
NOTE:The Postscript driver that supports this product is the Postscript version of the HP Universal
Print Driver (UPD) for Windows. It installs and operates in the same manner as previous versions of
Postscript drivers, and it does not require any...

HP Universal Print Driver (UPD)
The HP Universal Print Driver (UPD) for Windows is a single driver that gives you instant access to
virtually any HP LaserJet product, from any location, without downloading separate drivers. It is built on
proven HP print driver technology and has been tested thoroughly and used with many software
programs. It is a powerful solution that performs consistently over time.
The HP UPD communicates directly with each HP product, gathers configuration information, and then...