HP Color LaserJet 4700dtn User Manual

Menu itemValuesDescription
SOURCE
ADJUST TRAY [N]that is printed on the front with the image
that is printed on the back.
PRINT TEST PAGE: Prints a test page that
shows the current registration settings.
SOURCE : Allows you to select the tray for
which you want to print the test page. If
installed, optional trays appear as
selections, where [N] is the number of the
tray.
ADJUST TRAY [N] : Sets the registration
fro the specified tray, where [N] is the
number of the tray. A selection appears for
each tray...

Menu itemValuesDescription
PRE-ROTATION
RE-TRANSFER
FUSER TEMP
TRAY 1
RESTORE OPTIMIZE
QUICK CALIBRATE NOW Performs partial printer calibrations.
For more information, see 
Calibrating theprinter.
FULL CALIBRATE NOW Performs all printer calibrations.
For more information, see 
Calibrating theprinter.
COLOR RETOFF
ONThe COLOR RET  menu item allows you to
turn on or turn off the printer REt
(Resolution Enhancement Technology)
setting. The default is  ON.
CLEANING INTERVAL1000
2000
5000
10000
20000Select...

See Changing printer control panel configuration settings for more information.
Menu itemValuesDescription
DATE/TIMEDATE
DATE FORMAT
TIME
TIME FORMATAllows you to set various configurations for
the date format when setting the date and
select a 12-hour or 24-hour clock when
setting time.
JOB STORAGE LIMIT1-100Sets the limit for the maximum number of
jobs stored on the hard disk at the printer.
The default is 32.
JOB HELD TIMEOUTOFF
1 HOUR
4 HOURS
1 DAY
1 WEEKSets the period of time that the system
keeps...

Menu itemValuesDescription
DUPLEX BLANK PAGES 
IMAGE ROTATION
The default for USE ANOTHER TRAY isENABLED.
The default for MANUALLY FEEDPROMPT is ALWAYS.
PS DEFER MEDIA affects how paper is
handled when printing from an Adobe PS print driver. ENABLED uses HP’s paperhandling. DISABLED uses the Adobe PS
paper handling. The default is ENABLED.
The default for DUPLEX BLANK PAGES isAUTO.
The default for IMAGE ROTATION isStandard.
See Changing printer control panel
configuration settings for more information....

Menu itemValuesDescription
pauses until the color supply is replaced.
OVERRIDE AT OUT allows printing to
continue when a color supply is out, but
displays a warning that override is in use
and that the supply must be replaced.
ORDER ATRANGE=0-100The user can set the percent remaining at
which the  ORDER AT  message is
displayed. The default is  15.
COLOR SUPPLY OUTSTOP
AUTOCONTINUE BLACKSets the COLOR SUPPLY OUT  printer
behavior when a color supply is empty.
When the printer is set to
AUTOCONTINUE...

Menu itemValuesDescription
STAPLES OUTCONTINUE
STOPThe STAPLES OUT  menu defines the
action that the stapler/stacker takes when it
runs out of staples. It can instruct the printer
to stop and wait until the stapler cartridge is
replaced, or it can allow printing to continue
without stapling. If the device is configured
to stop when the cartridge is empty, up to
two jobs might be processed without
stapling before the printer stops. The
default is  CONTINUE .
OFFSET ENABLED
DISABLED The 
OFFSET  menu...

Menu itemValuesDescription
DLC/LLC: Select whether the DLC/LLC
protocol stack is enabled or disabled.
SECURE WEB : Specify whether the
embedded Web server accepts
communications by using only secure
HTTP (HTTPS) or by using both HTTP and
HTTPS.
DIAGNOSTICS : Provides tests to help
diagnose network hardware or TCP/IP
network connection problems.
RESET SECURITY : Specifies whether the
current security settings on the print server
are saved or reset to factory defaults.
LINK SPEED : Selects the network...

Menu itemValuesDescription
communication, the Jetdirect settings must
match those of the network.
Resets menu
The resets menu allows you to reset factory settings, disable and enable sleep mode, and update the
printer after new supplies are installed.
Menu itemValuesDescription
RESTORE FACTORY SETTINGSNone.Allows you to clear the page buffer, remove
all perishable personality data, reset the
printing environment, and return all default
settings to factory defaults.
SLEEP MODEValues are ON and OFF ....

Diagnostics menu
The diagnostics menu allows you to run tests that can help you identify and solve problems with the
printer.
Menu itemDescription
PRINT EVENT LOGThis item will print an event log that will display the last 50 entries in the
printer’s event log, starting with the most recent.
SHOW EVENT LOGThis item displays the last 50 events on the control panel display, starting with
the most recent.
PQ TROUBLESHOOTINGThis item prints a series of 8 pages that include instructions, pages for each...

Changing printer control panel configuration settings
By using the printer control panel, you can make changes to general printer configuration default settings
such as tray size and type, sleep mode, printer personality (language), and jam recovery.
The printer control panel can also be accessed from a computer by using the Settings page of the
embedded Web server. The computer shows the same information that the control panel shows. For
more information, see 
Using the embedded Web server....