HP 5500 Ei 5500 Si Switch Series Configuration Guide
Here you can view all the pages of manual HP 5500 Ei 5500 Si Switch Series Configuration Guide. The HP manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 2501
200 Figure 66 Add Device Group page Set the group name and click OK. # Select Device Class from the navigation tree. On the device class page, click Add to enter the page for adding a device class. Figure 67 Add Device Class page After setting the class name, click OK. # Select Add Device from the navigation tree to en ter the page for adding a device.
Page 2502
201 Figure 68 Add Device page Input the device information and click OK. Figure 69 Adding device succeeded Repeat the previous steps to add information about DeviceB and DeviceC to the ACS server, and the adding operation of switches in equipment room A is completed. # Bind different configuration files to differ ent CPE groups to realize auto-deployment. Select Deployment Guide from the navigation tree. On the deployment guide page, select By Device Type in the Auto Deploy...
Page 2503
202 Figure 70 Deployment Guide page # On the Auto Deploy Configuration page, select the configuration fi le to be deployed and set it as the startup configuration as the deployment strategy. Figure 71 Auto Deploy Configuration page # Click Select Class and enter the page for selecting device type.
Page 2504
203 Figure 72 Selecting a device class # Select the Device_A device class and click OK. After that, the auto deploy configuration page is displayed. Click OK to complete the task. Figure 73 Deploying task succeeded Configuration of the switches in room B is the same as that of the switches in room A except that you need to perform the following configuration: { Create device class Device_B for switches in room B. { Add switches in room B to the device class Device_B. { Bind the...
Page 2505
204 I n thi s e xample , the DHC P se r ve r is an HP s w i tc h su ppor ti ng the O ptio n 4 3 fu nc ti on. I f yo u r DHC P server is not an HP switch supporting the Option 43 function, see the user manual came with your server. Configure a DHCP address pool. Assign IP addresses to CPEs and the DNS server. In this example, the addresses are in the ne twork segment 10.185.10.0/24. # Enable DHCP. system-view [DHCP_server] dhcp enable # Enable the DHCP server on VLAN-interface 1....
Page 2507
206 Configuring a stack (available only on the HP 5500 SI) The stack management feature enables you to configure and monitor a group of connected switches by logging in to one switch in the stack, as shown in Figure 75. Figure 75 Network diagram for stack management To s e t u p a s t a c k f o r a g ro u p o f c o n n e c t e d swi t c h e s , yo u m u s t l o g i n t o o n e swi t c h t o c re a t e t h e s t a ck . T h i s switch is the master switch for the stack,...
Page 2508
207 Always start configuring the master device with assigning a private IP address pool for the stack. You cannot perform this task after the switch is configured as the master device or a member device. Configuring a private IP address pool for the stack Make sure that the number of IP addresses in the address pool is equal to or greater than the number of devices to be added to the stack. If not, some devi ces cannot automatically join the stack for lack of private IP addresses. To configure a...
Page 2509
208 Step Command Remarks 1. Enter system view. system-view N/A 2. Configure the specified ports as stack ports. stack stack-port stack-port-num port interface-list By default, a port is not a stack port. After a device joins a stack and becomes a member device of the stack, the prompt changes to , where n is the stack number assigned by the master device, and Sysname is the system name of the device. Logging in to the CLI of a member from the master Perform this task on the...
Page 2510
209 Figure 76 Network diagram Configuration procedure 1. Configure the master device: # Configure a private IP address pool for the stack on Switch A. system-view [SwitchA] stack ip-pool 192.168.1.1 24 # Configure port GigabitEthernet 1/0/1 as a stack port on Switch A. [SwitchA] stack stack-port 1 port gigabitethernet 1/0/1 # Configure switch A as the master device. [SwitchA] stack role master 2. Configure the member devices: # On Switch B, configure local ports Gigabi tEthernet 1/0/2,...