Home > HP > Printer > HP 5500 Ei 5500 Si Switch Series Configuration Guide

HP 5500 Ei 5500 Si Switch Series Configuration Guide

Here you can view all the pages of manual HP 5500 Ei 5500 Si Switch Series Configuration Guide. The HP manuals for Printer are available online for free. You can easily download all the documents as PDF.

Page 141

 129 
The main boot app is:     flash:/soft-version2.bin 
The backup boot app is:   flash:/ 
 Slot 3 
The current boot app is:  flash:/soft-version2.bin 
The main boot app is:     flash:/soft-version2.bin 
The backup boot app is:   flash:/ 
  

Page 142

 130 
Managing the device 
Device management includes monitoring the operating status of devices and configuring their running 
parameters. 
The configuration tasks in this document are order independent. You can perform these tasks in any 
order. 
Configuring the device name 
A device name identifies a device in a network an d works as the user view prompt at the CLI. For 
example, if the device name is  Sysname, the user view prompt is . 
To configure the device name: 
 
Step Command Remarks 
1....

Page 143

 131 
Command  Effective system time Configuration example System time 
2, 1  date-time 
clock timezone 
zone-time add 1 
clock datetime 3:00 
2007/3/3 
03:00:00 zone-time Sat 
03/03/2007. 
3  The original system time 
outside the daylight 
saving time range:  
The system time does not 
change until it falls into 
the daylight saving time 
range. 
 
clock summer-time ss 
one-off 1:00 
2006/1/1 1:00 
2006/8/8 2 01:00:00 UTC Sat 
01/01/2005. 
The original system time 
in the daylight saving time 
range:...

Page 144

 132 
Command  Effective system time Configuration example System time 
3, 1 
(date-time in the 
daylight saving time 
range)  date-time
 – summer-offset  
outside the daylight 
saving time range:  
date-time  – summer-offset 
clock summer-time ss 
one-off 1:00 
2007/1/1 1:00 
2007/8/8 2 
clock datetime 1:30 
2007/1/1 
23:30:00 UTC Sun 
12/31/2006. 
date-time  – summer-offset  
in the daylight saving time 
range:  
date-time clock summer-time ss 
one-off 1:00 
2007/1/1 1:00 
2007/8/8 2 
clock datetime...

Page 145

 133 
Command  Effective system time Configuration example System time 
date-time in the daylight 
saving time range, but 
date-time – summer-offset 
outside the summer-time 
range:  
date-time – summer-offset
 
clock timezone 
zone-time add 1 
clock summer-time ss 
one-off 1:00 
2008/1/1 1:00 
2008/8/8 2 
clock datetime 1:30 
2008/1/1 
23:30:00 zone-time Mon 
12/31/2007. 
Both date-time  and 
date-time – summer-offset 
in the daylight saving time 
range:  
date-time  
clock timezone 
zone-time add 1...

Page 146

 134 
To enable displaying the copyright statement:  
Step Command Remarks 
1.  Enter system view. 
system-view  N/A 
2.  Enable displaying the 
copyright statement.  copyright-info
 enable   Optional 
Enabled by default. 
 
Changing the brand name 
An IRF fabric using HP, H3C, and 3Com member switches together might cause network management 
problems. For example, if an IRF fabric uses an HP 
swi t c h  a s  t h e  m a s t e r  m e m b e r  swi t c h  a n d  u s e s  a n  H 3 C  
s w i t c h  a s  a  s...

Page 147

 135 
the procedure for changing the brand name of an H3C or 3Com switch to HP. The procedure is the same 
for changing the brand names among HP, H3C, and 3Com switches.  
1. Load the proper HP Boot ROM to the flash memory of the H3C or 3Com switch and use the HP 
Boot ROM to upgrade the Boot ROM of the switch.  
2. Load the proper HP system software image file to the flash memory of the H3C or 3Com switch, 
specify the file as the main system software image file, and reboot the switch.  
3. Execute the...

Page 148

 136 
The system supports the following banners: 
•  Legal banner —Appears after the copyright or license statem ent. To continue login, the user must 
enter  Y or press  Enter. To quit the process, the user must enter N . Y and N are case-insensitive. 
•   Message of the Day (MOTD) banner —Appears after the legal banner and before the login banner. 
•   Login  banner—Appears only when password or scheme authentication has been configured. 
•   Incoming  banner —Appears for Modem users.  
•   Shell...

Page 149

 137 
Please input banner content, and quit with the character A. ――System prompt 
Please input the password.A 
Configuration procedure 
To configure a banner:  
Step Command Remarks 
1.   Enter system view. 
system-view  N/A 
2.  Configure the incoming 
banner.  header incoming
 text  Optional 
3.  Configure the login banner.  header login text Optional 
4.  Configure the legal banner. 
header legal text Optional 
5.  Configure the shell banner. 
header shell text Optional 
6.  Configure the MOTD...

Page 150

 138 
 CAUTION: 
•
  A reboot can interrupt network services. 
•   To avoid data loss, use the  save command to save the current configuration before a reboot.  
•   Use the display startup  and display boot-loader  commands to verify that you have correctly set the 
startup configuration file and the main system software image file. If the main system software image file
has been corrupted or does not exist, the device cannot reboot. You must re-specify a main system 
software image file, or power off...
Start reading HP 5500 Ei 5500 Si Switch Series Configuration Guide

Related Manuals for HP 5500 Ei 5500 Si Switch Series Configuration Guide

All HP manuals