Home > HP > Calculator > HP 35s User Manual

HP 35s User Manual

Here you can view all the pages of manual HP 35s User Manual. The HP manuals for Calculator are available online for free. You can easily download all the documents as PDF.

Page 31

 
hp calculators 
 
HP 35s  Temperature Conversions 
 
hp calculators - 5 - HP 35s  Temperature Conversions - Version 1.0 
Other temperature scales 
 
A temperature scale with 100 degrees between two points is called a centigrade scale (“centigrade” means one hundred 
degrees), and is an obvious scale for use in the metric system where measurements are based on powers of 10. A scale 
with 0 at the freezing point of water and 100 at the boiling point was suggested by Celsius, and is now called the Celsius...

Page 32

 
hp calculators 
 
HP 35s  Temperature Conversions 
 
hp calculators - 6 - HP 35s  Temperature Conversions - Version 1.0 
 Figure 7 
 
:1> should be typed, and the equation will run for a moment, then the answer will be displayed. 
 
 Figure 8 
 
Answer: The answer, 305.372 degrees Kelvin, is displayed.
 
The equation can now be used again to convert a different temperature from degrees Fahrenheit to degrees Kelvin. 
Press 6, to enter equation mode again, press 2 to start the equation again, type the...

Page 33

 
 
hp calculators 
 
 
 
 
HP 35s  Angular conversions and arithmetic 
 
 
 
 
Angular measurements 
 
Time measurements 
 
Practice solving problems involving angles and times 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
   

Page 34

 
hp calculators 
 
HP 35s  Angular Conversions and Arithmetic 
 
hp calculators - 2 - HP 35s  Angular Conversions and Arithmetic - Version 1.0 
Angular measurements 
 
There are two primary ways of measuring angles, radians and degrees (there is a third way, Grads, which is not used as 
often). Radians measures the span of an angle in terms of the unit circle, where a full revolution involves an angle of 2!. 
Degrees measures the span of an angle where a full revolution involves an angle of 360 degrees....

Page 35

 
hp calculators 
 
HP 35s  Angular Conversions and Arithmetic 
 
hp calculators - 3 - HP 35s  Angular Conversions and Arithmetic - Version 1.0 
 Figure 3 
 
Answer: 1.3177 radians. Figure 3 shows the display assuming algebraic mode. 
 
Example 4: Convert an angle of 20.67 decimal decrees to an angle format of DMS. 
 
Solution: In RPN or algebraic mode: 1)23#%4
 In algebraic mode: #%1)23( 
 
 Figure 4 
 
Answer: The equivalent measurement in DMS is 20 degrees, 40 minutes and 12 seconds. Figure 4 shows...

Page 36


				            

Page 37

 
 
hp calculators 
 
 
 
 
HP 35s  Using Calculator Memories to  
Help Solve Problems 
 
 
 
 
Variables and Memory Registers 
 
Practice Examples:  
 
Storing and Using a Constant 
 
Storing a Temporary Result 
 
Exchanging and Viewing Registers 
 
Other Operations with Memory Registers 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
   

Page 38

 
hp calculators 
 
HP 35s  Using Calculator Memories to Help Solve Problems 
 
hp calculators - 2 - HP 35s  Using Calculator memories to Help Solve Problems - Version 1.0 
Variables and Memory Registers 
 
When an equation is typed on the HP 35s, it can use variables with names from A through Z. For example an equation 
 
3X² - 5X= A 
 
has the variables X and A in it. 
 
Variables can also be used in programs and in calculations from the keyboard. 
 
Each variable consists of a number and of a place in...

Page 39

 
hp calculators 
 
HP 35s  Using Calculator Memories to Help Solve Problems 
 
hp calculators - 3 - HP 35s  Using Calculator memories to Help Solve Problems - Version 1.0 
 To calculate the mass, multiply the length by the width by the height. Then recall the number from D and 
multiply by that. In RPN mode, press the keys: 
  
 )(%*+),+-+ 
  
 In algebraic mode, press: 
  
 )+%*+),+-( 
  
 Figure 1 
 
Answer: The beam has a mass of 8,988 pounds. This value of the variable D can be used for further...

Page 40

 
hp calculators 
 
HP 35s  Using Calculator Memories to Help Solve Problems 
 
hp calculators - 4 - HP 35s  Using Calculator memories to Help Solve Problems - Version 1.0 
 In algebraic mode, type the expression like this: 
  
 %)012*( 
  
 Figure 3 
  
 Then store it in register V by typing: 
  
 !!3( 
  
 Figure 3 
  
 Now the main formula can be calculated. First calculate the top line at the left-hand of the formula. The 
value of the expression is still available, so there is no need to recall it,...
Start reading HP 35s User Manual

Related Manuals for HP 35s User Manual

All HP manuals