HP 14 Elitebook Folio 1040 G2 Notebook User Manual

2.Press fn+f4 to alternate the screen image between 4 display states:
●PC screen only: View the screen image on the computer only.
●Duplicate: View the screen image simultaneously on both the computer and the external device.
●Extend: View the screen image extended across both the computer and the external device.
●Second screen only: View the screen image on the external device only.
Each time you press fn+f4, the display state changes.
NOTE:For best results, especially if you choose the...

To set up multiple display devices, follow these steps:
1.Connect an external hub (purchased separately) to the DisplayPort on your computer, using a DP-to-DP cable (purchased separately). Be sure that the hub power adapter is connected to AC power.
2.Connect your external display devices to the VGA ports or DisplayPorts on the hub.
3.To see all of your connected display devices, type device manager in the taskbar search box, and 
then select the 
Device Manager app. If you don't see all of your...

Discovering and connecting to Miracast-compatible wireless displays (select 
products only)NOTE:To learn what type of display you have (Miracast-compatible or Intel WiDi), refer to the 
documentation that came with your TV or secondary display.
To discover and connect to Miracast-compatible wireless displays without leaving your current apps, follow 
the steps below.
To open Miracast:
▲Type project in the taskbar search box, and then click Project to a second screen. Click Connect to a 
wireless display...

NOTE:The following images may look di

2.Slide the expansion port device connector into the docking connector on the computer until the 
connector is seated.Using optional external devices33 

6Power management
NOTE:A computer may have a power button or a power switch. The term power button is used throughout 
this guide to mean both types of power controls.
Shutting down (turning o

NOTE:You cannot initiate any type of networking connection or perform any computer functions while the 
computer is in the Sleep state.
Initiating and exiting Sleep
With the computer on, you can initiate Sleep in any of the following ways:
●%rie

i

●HP Battery Check tool to test battery performance
●Information on calibration, power management, and proper care and storage to maximize battery life
●Information on battery types, speci

●The Power meter icon  shows a low or critical battery noti