HP 13 3 Probook 430 G2 Notebook User Manual

B Troubleshooting
Troubleshooting resources
●Access website links and additional information about the computer through HP Support
Assistant. To access HP Support Assistant, from the Start screen, select the HP Support
Assistant app.
NOTE:Some checkup and repair tools require an Internet connection. HP also provides
additional tools that do not require an Internet connection.
●Contact HP support. For U.S. support, go to http://www.hp.com/go/contactHP. For worldwide
support, go to...

change these and other power settings, right-click the Battery icon on the Windows desktop in
the notification area, at the far right of the taskbar, and then click Preferences.
●The computer may not be set to display the image on the computer screen. To transfer the
image to the computer screen, press fn+f4. On most models, when an optional external display,
such as a monitor, is connected to the computer, the image can be displayed on the computer
screen or the external display, or on both devices...

●Be sure that the device, especially if it is older, is compatible with the operating system.
●Be sure that the correct drivers are installed and updated.
The wireless network connection is not working
If a wireless network connection is not working as expected, follow these suggestions:
●To enable or disable a wireless or wired network device, right-click the Network Connection icon
on the Windows desktop in the notification area, at the far right of the taskbar. To enable
devices, select the check box...

NOTE:When using both displays, the DVD image will not appear on any display designated as
the secondary display.
The process of burning an optional external optical drive disc does not begin, or
it stops before completion
●Be sure that all other programs are closed.
●Turn off Sleep mode.
●Be sure that you are using the right kind of disc for your drive.
●Be sure that the disc is inserted properly.
●Select a slower write speed and try again.
●If you are copying a disc, save the information on the source...

C Electrostatic discharge
Electrostatic discharge is the release of static electricity when two objects come into contact—for
example, the shock you receive when you walk across the carpet and touch a metal door knob.
A discharge of static electricity from fingers or other electrostatic conductors may damage electronic
components. To prevent damage to the computer, damage to a drive, or loss of information, observe
these precautions:
●If removal or installation instructions direct you to unplug the...

Index
Symbols/Numerics
2-finger pinch zoom TouchPad
gesture 25
A
AC adapter, testing 43
AC adapter/battery light 4
administrator password 55
airport security devices 48
antivirus software 61
audio functions, checking 33
audio-in (microphone) jack,
identifying 4
audio-out (headphone) jack,
identifying 4
Automatic DriveLock password
entering 60
removing 60
B
battery
conserving power 42
discharging 40
displaying remaining charge
40
disposing 42
low battery levels 40
replacing 43
storing 42
battery bay,...

headphones and microphones,
connecting 32
Hibernation
exiting 38
initiating 38
high-definition devices,
connecting 35
hot keys
adjusting volume 29
decrease screen brightness
29
decreasing speaker sound 29
description 29
increase screen brightness 30
increasing speaker sound 29
keyboard backlight 30
Sleep 29
switching screen image 29
using 29
HP 3D DriveGuard 52
HP Client Security  61
HP Mobile Broadband, disabled
20
HP PC Hardware Diagnostics
(UEFI)
downloading 76
using 76
hubs 46
I
input power 79...

public WLAN connection 19
R
readable media 38
recovery 70
recovery partition 69
refresh 70
regulatory information
regulatory label 78
wireless certification labels 78
reset 70
restoring the hard drive 69
RJ-45 (network) jack, identifying
4
RJ-45 (network) lights,
identifying 4
rotating TouchPad gesture 26
S
screen brightness keys 30
screen image, switching 29
scrolling TouchPad gesture 25
security cable slot, identifying 6
security, wireless 18
serial number, computer 78
setting password protection on...