Home > Hornady > Firearms accessories > Hornady New Dimension Dies Instructions

Hornady New Dimension Dies Instructions

Add to Favourites
    Download as PDF

    View the Hornady New Dimension Dies Instructions for free. All the Hornady manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview Comments
    Page 1 Custom-Grade TM Dies NEW DIMENSION TM
    Page 2 BEFORE USING DIES Before using your new dies, disassemble and carefully clean the inside surface of the sizing and seating dies (and the expander die if a three-die set.) A rust preventive oil is applied at the factory to protect the dies during shipping and must be removed before reloading. Any commercial solvent or cleaner (like our ONE SHOT Gun Cleaner and Dry Lube) will suffice. Inspect all cartridge cases and discard those with cracks, splits and other visible defects. Wipe cases clean with a...
    Page 3 SEATING WITH A CRIMP To begin, refer to the procedure for SEATING WITHOUT A CRIMP. Follow the procedure throughout, however, DO NOT TIGHTEN THE DIE BODY LOCK RING. 1 Once you’ve reached the preferred seating depth for the bullet, back out the seater adjustment screw a few turns. 2 Raise the ram, with the cartridge, to the top of the stroke. 3 Thread the seater die body into the press until it meets resistance (again, at that point, the mouth of the case has met resistance with the crimper.) 4...
    Page 4 ACCESSORIES MicroJust™ The economical way to achieve optimum bullet seating depth for benchrest accuracy and consistency. Simply replace the standard seating depth adjustment stem on your New Dimension Custom Grade Dies with the MicroJust Seating stem. Allows you to precisely set bullet seating depth in .001" increments. No. 044090 L-N-L Die and Conversion Bushings Simply insert a Hornady conversion bushing into your RCBS® Rock Chucker or other reloading press using a 11⁄4-12 thread, and...
    Start reading Hornady New Dimension Dies Instructions

    Related Manuals for Hornady New Dimension Dies Instructions

    All Hornady manuals