Honeywell control panel VISTA128FBPVISTA250FBP User Manual
Here you can view all the pages of manual Honeywell control panel VISTA128FBPVISTA250FBP User Manual. The Honeywell manuals for Control panel are available online for free. You can easily download all the documents as PDF.
Page 61
– 61 – Trouble Conditions (cont’d) • A display of COMM. FAILURE at the Keypad indicates that a failure has occurred in the telephone communication portion of your system. CALL FOR SERVICE IMMEDIATELY. • A display of SYSTEM LO BAT, accompanied by a once per minute beeping at the Keypad indicates that a low system battery condition exists. CALL FOR SERVICE IMMEDIATELY. • A display of LO BAT and a zone descriptor, accompanied by a once per minute beeping at the Keypad indicates that a low...
Page 62
– 62 – Emergency Evacuation Establish and regularly practice a plan of escape in the event of fire. The following steps are recommended by the National Fire Protection Association: 1. Position your detector or your interior and/or exterior sounders so that they can be heard by all occupants. 2. Determine two means of escape from each room. One path of escape should lead to the door that permits normal exit from the building. The other may be a window, should your path be impassable. Station...
Page 63
– 63 – Maintaining Your System Taking Care of Your System The components of your security system are designed to be as free of maintenance as possible. However, there are some things you can do to make sure that your system is in reliable working condition. 1. Test your system weekly. (See TESTING THE SYSTEM and FIRE ALARM SYSTEM sections). 2. Test the system after any alarm occurs. Replacing Batteries in Wireless Sensors Wireless sensors may not have been used in your security system...
Page 64
– 64 – Maintaining Your System (cont’d) Silencing Low Battery Warning Tones at the Keypad The keypad’s warning tones can be silenced by performing an OFF sequence (code plus OFF key), but the Keypads low battery message display will remain on as a reminder that you have a low battery condition in one or more of your sensors. When you replace the weak battery with a fresh one, the sensor will send a good battery signal to the control as soon as the sensor is activated (opening/closing of door,...
Page 65
– 65 – Quick Guide to Fire System Functions ACTION PROCEDURE Displaying Event The system is programmed to lock the keypad display with the first event that occurred in priority order. 1. Fire – highest priority 2. Life Safety 3. Troubles and Supervisory 4. System Events (i.e. low battery) – lowest priority To display the next event, press the [*] key. Repeat as necessary. To revert to the first event displayed, press the # key. Silencing Fire Alarms Enter User Code +1 (OFF)....
Page 66
– 66 – Quick Guide to Burglary System Functions FUNCTION PROCEDURE COMMENTS Check Zones Press [✱]. To view faulted zones when is system not ready Display All Descriptors Press and hold [✱] for 5 seconds. Displays all alpha descriptors programmed by installer. Arm System Enter code. Press arming key desired (AWAY, STAY, INSTANT, MAXIMUM). Arms system in mode selected. NOTE: After pressing the STAY or INSTANT arming key, enter 1, 2 or 3 to arm in the desired STAY or INSTANT mode....
Page 67
– 67 – Quick Guide to Burglary System Functions (cont’d) FUNCTION PROCEDURE COMMENTS Delete a User Enter master/manager code. Press CODE [8]. Enter user no. to be deleted. Enter master/manager code. Press 1 (Yes) at prompt. Master and Manager level users can delete users. A user can only be deleted by a user with higher authority level. Enter security code. Press [#] Enter 71 or 72. Activate output device as programmed. Enter security code. Press [#] Enter 70. Activate output device...
Page 68
– 68 – Summary of Audible Notification (Alpha Display Keypads) SOUND CAUSE DISPLAY LOUD, INTERRUPTED* Keypad & External FIRE ALARM FIRE is displayed; descriptor of zone in alarm is displayed. LOUD, CONTINUOUS* Keypad & External BURGLARY/AUDIBLE EMERGENCY ALARM AL ARM is displayed; descriptor of zone in alarm is also displayed. ONE SHORT BEEP (not repeated) Keypad only a. SYSTEM DISARM b. SYSTEM ARMING ATTEMPT WITH AN OPEN ZONE. c. BYPASS VERIFY a. DISARMED/READY TO ARM...
Page 69
– 69 – FEDERAL COMMUNICATIONS COMMISSION STATEMENTS The user shall not make any changes or modifications to the equipment unless authorized by the Installation Instructions or Users Manual. Unauthorized changes or modifications could void the users authority to operate the equipment. FCC CLASS B STATEMENT This equipment has been tested to FCC requirements and has been found acceptable for use. The FCC requires the following statement for your information: This equipment generates and uses...
Page 70
– 70 – “FEDERAL COMMUNICATIONS COMMISSION (FCC) Part 68 NOTICE This equipment complies with Part 68 of the FCC rules. On the front cover of this equipment is a label that contains, among other information, the FCC registration number and ringer equivalence number (REN) for this equipment. If requested, this information must be provided to the telephone company. This equipment uses the following jacks: An RJ31X is used to connect this equipment to the telephone network. The REN is used to...