Home > Honeywell > Control panel > Honeywell control panel VISTA10SE VIA30PSE Security Systems User Manual

Honeywell control panel VISTA10SE VIA30PSE Security Systems User Manual

Here you can view all the pages of manual Honeywell control panel VISTA10SE VIA30PSE Security Systems User Manual. The Honeywell manuals for Control panel are available online for free. You can easily download all the documents as PDF.

Page 11

–11–
SECURITY CODES (Continued)
Duress Code
(Continued)
To program a Duress code:Enter your Master Code + 8 + 8 + [desired 4-digit duress code].
The keypad will beep once.
Note: The Duress code must differ from the Master Code or any other User’s Code.To change the Duress code:Enter Master Code + 8 + 8 + [new 4-digit duress code].To delete the Duress code:Enter your Master Code + 8 + 8,  and then stop. When the keypad beeps once it signifies
that the code has been deleted.
To Change Your Master
Code1 ....

Page 12

–12–
ENTRY/EXIT DELAYS
General InformationYour system has preset time delays, known as exit delay and entry delay. When you arm
your system, exit delay gives you time to leave through the entry/exit door without
setting off an alarm.  Entry delay gives you time to disarm the system when you re-enter
through the entry/exit door. The system must be disarmed, however, before the entry
delay period ends, or an alarm will occur. The keypad will beep slowly during the entry de-
lay period, reminding you to...

Page 13

–13–
CHECKING FOR OPEN ZONES
Using the
 
 Q
  READY Key
Before arming your system, all protected doors, windows and other protection zones
must be closed or bypassed (see 
BYPASSING
 PROTECTION
 ZONES
 section), otherwise
the keypad will display a Not Ready message, and if your keypad has a READY indicator
light, it will not be lit. The READY key can be used to display all faulted zones, making it
easier for you to secure any open zone.
To display faulted zones, simply press and release the READY [Q] key...

Page 14

–14–
BYPASSING PROTECTION ZONES
Using the
 
 6 
 BYPASS KeyLIMITATION
The system will notallow fire zones tobe bypassed.
All bypasses are removedwhen an OFF sequence(security code plus OFF)is performed.
This key is used when you want to arm your system with one or more zones intentionally
unprotected. The system must be disarmed first.
1 . Enter your security code and press the BYPASS key.
2 . Enter the zone number(s) for the zone(s) to be bypassed (e.g., 06, 10, 13, etc.).
Single digit zone numbers must...

Page 15

–15–
BYPASSING PROTECTION ZONES (Continued)
Quick Bypass
Ask your installer ifQuick Bypass is activefor your system, and ifso, check here:  
   
If your system supports Quick Bypass, it allows you to easily bypass all open (faulted)
zones without having to enter zone numbers individually. This feature is useful if, for
example, you routinely leave certain windows open when arming at night.
To use this feature, enter your security code, press the BYPASS key, then stop. In a few
moments, all open zones...

Page 16

–16–
ARMING PERIMETER ONLY
WITH ENTRY DELAY ON
Using the
 
 3 
 STAY Key
BEFORE ARMING,close all doors and windows(see 
CHECKING
 FOR
 OPEN
ZONES
 on page 13).
 THE STAY MODE ARMS THE PERIMETER, BUT ALLOWS USE OF THE ENTRY/EXIT DOOR. PERSONS WITHIN THE PREMISES CAN MOVE ABOUT FREELY.
Use this key when  staying inside, but expect someone to use an entry/exit door later.
1 . Enter your security code and press the STAY key.
2 . The keypad beeps three times and displays the armed STAY message. The red
ARMED...

Page 17

–17–
ARMING PERIMETER ONLY
WITH ENTRY DELAY OFF
Using the
 7 
 INSTANT Key
BEFORE ARMING,close all doors and windows(see 
CHECKING
 FOR
 OPEN
ZONES
 on page 13)
 THE INSTANT MODE ARMS THE PERIMETER (INCLUDING THE ENTRY/EXIT DOOR), WITH NO ENTRY DELAY. PERSONS WITHIN THE PREMISES CAN MOVE ABOUT FREELY
Use this key when staying inside and do not expect anyone to use an entry/exit door.
1 . Enter your security code and press the INSTANT key.
2 . The keypad beeps three times and displays the armed message....

Page 18

–18–
ARMING ALL PROTECTION
WITH ENTRY DELAY ON
Using the
 
 2 
 AWAY Key
BEFORE ARMING,close all doors and windows(see 
CHECKING
 FOR
 OPEN
ZONES
 on page 13)
Use this key when no one will be staying inside.
1 . Enter your security code and press the AWAY key.
2 . The keypad beeps twice and displays the armed message. The red ARMED indicator
lights.
3 . You may leave through an entry/exit door during the exit delay period without causing
an alarm.
After the exit delay expires, the system arms and sounds...

Page 19

–19–
ARMING ALL PROTECTION
WITH ENTRY DELAY OFF
Using the
 
 4 
 MAXIMUM Key
BEFORE ARMING,close all doors and windows(see 
CHECKING
 FOR
 OPEN
ZONES
 on page 13)
Use this key when the premises will be vacant for extended periods of
time such as vacations, etc., or when retiring for the night and no one will be moving
through protected interior areas.
1 . Enter your security code and press the MAXIMUM (MAX) key.
2. The keypad beeps twice and displays the armed MAXIMUM message. The red
ARMED indicator...

Page 20

–20–
DISARMING THE SYSTEM AND SILENCING ALARMS
Using the
 
 1 
 OFF Key
IMPORTANT:
If you return and themain burglary sounder ison, DO NOT ENTER, butCONTACT THE POLICE from anearby safe location.If you return after analarm has occurred andthe main sounder hasshut itself off, the keypadwill beep rapidly upon yourentering, indicating that analarm has occurred duringyour absence.LEAVE IMMEDIATELY, andCONTACT THE POLICE from anearby safe location.
The OFF key is used to disarm the system and to silence alarm...
Start reading Honeywell control panel VISTA10SE VIA30PSE Security Systems User Manual

Related Manuals for Honeywell control panel VISTA10SE VIA30PSE Security Systems User Manual

All Honeywell manuals